Construction work of the office of Sub-division-IIIrd (Palwal), DRO Office and Jiledari Office under the control of Upper Division, Agra Canal, Mathura.

Amount

Earth work in foundation in dry ordinary soil (loam clay or sand) including lift up to 1.5 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and thesides of foundation trenches or into the plinth with removal anddisposal or surplus earth as directed by the Engineer-in-charge up to a distance of 30M from the foundation trenches:(Building)

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Providing and laying C.C. 1:3:6 with cement, Coarse sand and stone grit (20-40 mm size) including cost of all material, labour and T&P etc.complete.

Brick work in Class-150 bricks in 1:6 cement and coarse sand mortar including supply of all material Labour, T&P etc.

Brick work in Class-150 in 115mm Thick Wall in 1:4 cement and coarse sand mortar including supply of all material Labour, T&P etc.

Dry Brick work in Class 150 including supply of all material Labour, T&P etc.

Earth work in embankment by power transported earth with a lead beyond 200m. and upto 1.00 Km. including excavation, loading, unloading, manual compaction, dressing and all lifts complete excluding royalty will be applicable from time to time on Govt. orders..

Providing and laying D.P.C. 40 mm thick with cement concrete consisting of( 1:2:4) cement , Coarse sand and 10mm grade stone grit and including water proofing material as directed by the Engineer-In -Charge in the proportion as specified by the manufacturer.

Centering and fine ply wood or steel shuttering for R C C Work including supply of all material Labour, T&P etc (Complete language for all heights.)

Centering and shuttering for C C Work including supply of all material Labour, T&P etc (Complete language for all heights.)

Providing and laying steel reinforcement (T.M.T. bars) i/c cutting, bending, binding and supply of steel etc.

RCC Work in 1:1.5:3 cement, coarse sand,stone grit 10- 20 mm size including Labour, T&P and curing etc.

RCC Work in 1:2:4 cement, coarse sand,stone grit 10- 20 mm size including Labour, T&P and curing etc.

Painting top roofs with bitumen of approved quality @ 1.70 kg. Per Sq.M. impregnated with a cost of coarse sand @ 0.60 Cu.M. per 100 Sq. M. including cleaning the slab surface with a piece of cloth lately soaked in kerosene oil complete.

Providing and laying C.C. 1:2:4 with cement, Coarse sand and stone grit (10-20 mm size) including cost of all material, labour and T&P etc.complete.

Providing and laying Brick Bats including cost of all material, labour and T&P etc.complete.

Providing and laying Coarse Sand including cost of all material, labour and T&P etc.complete.

Providing and laying Vitrified tiles in floor of 600*600mm sizes (thickness10mm) ,with water absorption less than 0.08% and confirming to IS : 15477, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, including grouting of joints.

Providing and fixing 1st quality ceramic glazed floor/wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Supply and fixing 35 mm thick commercial flush door(single leaf) shutters including cost of necesssary fittings and fixture and providing lipping with 2nd class teak wood

Providing and laying I shaped precast interlocking tiles of thickness 80 mm (ordinary gray) with 75 mm thick (1:5:10)Base concrete i/c 75mm thick local sand base levelling and dressing,filling joints with local sand etc complete.

Providing and fixing Bright finished brass 100mm mortice latch and lock ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc complete

Proving angle ion chaukhat size 50x50x6mm i/c all cost of Material, Labour and T&P etc. complete for proper completion of work

Proving M.S.Grill Work for Window and Ventilator i/c all cost of Material, Labour and T&P etc. complete for proper completion of work

Proving and Fixing M.S. GATE i/c all cost of Material, Labour and T&P etc. complete for proper completion of work

Fixing Door chowkhats in existing openingincluding embedding chowkhats in floor or walls cutting masonry for holdfasts,embedding hold fasts in cement concrete1;3;6(1 cement :3 coarse sand:6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping,all complete as per direction of Engineer -in - charge.

FixingWindow chowkhats in existing opening including embedding chowkhats in floor or walls cutting masonry for holdfasts,embedding hold fasts in cement concrete1;3;6(1 cement :3 coarse sand:6 graded stone aggregate 20 mm nominal size),painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping,all complete as per direction of Engineer -in - charge.

Providing and fixing 5.5 mm thick float glass panes shutters of aluminium Z-section door,window and ventilator

Providind and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both direction for doors, windows and clesrestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size second class teak wood

Cement plaster 12.5 mm thick in 1:6 cement coarse sand mortar i/c all cost of Material,Labour,T&P etc complete

Cement plaster 12.5 mm thick in 1:4 cement coarse sand mortar i/c all cost of Material,Labour,T&P etc complete

Finishing Walls With acrylic smooth exeterior paint emulsion paint of required shade( Two or more coat applied @ 1.67 ltr/10 Sqm ) including one coat of primar applied @ 2.20Ltr/ 10 sqm coat curing and cost of all material , labour, T&P etc. required for proper completion of work for two coat.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete supply of all labour material and T&P required for proper completion of work for all heights.

Distempering Two coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even sade over an including apriming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar,Asian paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with Plaster of paris of approved synthetic material and sand papered smooth including cost of all materials.

Painting (Two) coat on New steel surface over priming coat on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux Specified brushing to give and even shade and including the cleaning the surface of all durt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.

10 cm thick mud phaska of damped brick earth on roofs laids to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @35kg per cum of earth and gobri leaping with 1:1(1 clay :1cow dung )and covered with flat tile bricks ,grouted with cement mortar 1:3 (1cement :3 fine sand) mixed with 2% of integral water proofing neat with common burnt clay FPS (non modular ) brick tile of class designation.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand) including making joints with or without grooves ( thickness of joints except at sharp curve shall not be more than 5 mm), including makinh drainage opening wherever required complete etc. as per direction of engineer incharge ( length of finished kerb edging shall be measured to calculate volume for payment). ( Precast C.C. kerb stone shall be approved by Engineer-in-charge)

Providing and making of sal wood chaukhats i/c fixing at site with cost of timber as per Directed by Engineer in Charge.

Providing & Laying of Kota stone slab florring with 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, includin cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete with base of cement mortar 1:4(1cement :4 corse sand ):25 thick

Providing Gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

Providing and fixing 110 mm dia PVC pipe conforming to IS make working pressure 6 Kg/Cm including testing labour T&P and all complete fittings

Constructing Brick masonry chamber (600x 600x750mm) for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P brass pillar tap

Providing and fixing stainless steel kitchen sink with drain boad Size 510x1040mm bowl depth 200mm with C.I. brackets, 15 mm C.P. brass taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls etc.complete

Providing and fixing Fullway Gate Valve of Approved Quality including cost of material,labour and T&P etc.

Providing and fixing C.P. brass bib cock/ Angle Valve of approved quality conforming to IS:8931 15 mm nominal dia including cost of material, labour and T&P etc.

Providing and fixing C.P. brass Long body bib cock/ Angle Valve of approved quality conforming to IS:8931 15 mm nominal dia including cost of material, labour and T&P etc.

Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100 mm sand cast iron P or S Trap, 10 litre low level white P.V.C. Flushing Cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Viterous China Orissa pattern W.C. pan of size 580x440 mm with internal type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked whitesolid plastic seat and lid

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic mould frame of approved make and shade with 6 mm thick hard board backing rectangular shape 453 x 357 mm

Providing and fixing C. P. Brass Shower Rose with 15 or 20 mm inlet inciuding all cost of Material ,Labour ,T&P etc. Complete.

Poviding and fixing PTMT Soap Dish Holder having size 138mmx102mmx75mm inciuding all cost of Material ,Labour ,T&P etc. Complete.

Providing and fixing Stainless Steel Grating 100 mm dia inciuding all cost of Material ,Labour ,T&P etc. Complete.

Providing and fixing 110 mm dia PVC Rain Water Pipe Conforming to IS : 13592 Type A,including joint with seai ring conforming to IS : 5382,Leaving10mm Gap For Thermal Expansion (I) Single socketed pipe including testing labour T&P and all complete fittings

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (15 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For Concealed work, including cutting chases and making good the wall etc)

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(15 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For External work exposed on walls)

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(20 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For External work exposed on walls)

Supply and Hoisting of sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes , labour and T&P etc. for proper completion of work. Tank should be ISI marked , Sintex or equivalent

Wiring point for light (Surface Conduit) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit and GP Box ,Modular switch and ceiling rose/angle/ batten holder etc. complete in all respect, as directed .

Wiring point for fan /fresh air fan (Surface Conduit) (light duty exhaust fan) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit ,GP Box, Modular type switch & ceiling rose etc, complete in all respect.

Wiring Point for plug (Surface Conduit) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit , GP Box and Modular type switch and socket etc. complete in all respect.

Wiring point for call bell (Surface Conduit) with 1.5 sq. mm.FRLSH PVCinsulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit on surface, complete with 14 SWG copper earth continuity wire ,GP Box , and Modular type bell push or 2 pin socket etc. complete in all respect.

Supply and fixing of power plug with 20 Amp./250 (Surface Conduit) volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work

Supply and fixing of Electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work

Invertor Wiring in wiring Point for light/ Fan/ Plugwith 1.5 mm Cu Wire

S&F surface/flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

S&F of 40 Amp. SPMCB (10KA)C Curve C

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work

Submain in conduit on surface (2.5 sq. mm.)Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia. heavy duty (2mm thick) PVC conduit with 1 number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor as earth continuity wire. etc, complete in all respect.

Supplying and fixing 1.5 HP submersible pump incuding testing labour T&P and all complete fittings as per Direction of Engineer in Charge.

Supply & Fixing of Starter single phase MV. incuding testing labour T&P and all complete fittings as per Direction of Engineer in Charge.

Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 Watt. to 50 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA

Supply and fixing of Fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), ength up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Rakesh kumar (BID ID -4832698)

SHRI RADHE ASSOCIATES (BID ID -4832174)

M/s Pathak and Company (BID ID -4832787)

Sharma Enterprises (BID ID -4830656)

AJAY SHARMA (BID ID -4832762)