Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | single₹6.0 LAccepted-Finance | single | Accepted-Finance found in order |
| Sl No | Description | Qty | Unit | M/s SAGAR ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : | ||||
| 1.01 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.5 | Cum | 30,000 ₹15,000 Lowest |
| 2.00Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | ||||
| 2.01 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 50 | Kg | 500 ₹25,000 Lowest |
| 3.00Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately). | ||||
| 3.01 | 6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 : 2000 | 50 | Sqm | 1,000 ₹50,000 Lowest |
| 4.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 240 | Sqm | 1,600 ₹3,84,000 Lowest |
| 5.00Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: | ||||
| 5.01 | Ridges plain (500 - 600mm) | 17.5 | Mtr | 850 ₹14,875 Lowest |
| 6.00 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 70 | Mtr | 800 ₹56,000 Lowest |
Tender Value
₹5.7 L
EMD Value
₹11,330
Closing Date
1 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Civil)
BSNL Civil Division, 2nd Floor, Telephone Bhavan,Sri Vijaya Puram
Arresting leakages in roof by replacing the wornout GS sheet roofing, replacing of wornout false ceiling and realinging of sunken false ceiling in TE building Kamorta.
2025_BSNL_245370_1
23/NIT/CD-PB/AN/2025-26
Open Tender
Civil Works
Item Rate
30 days
Kamorta
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL
₹11,330
3 Sept 2025
14 Aug 2025
3 Sept 2025
14 Aug 2025
1 Sept 2025
14 Aug 2025
14 Aug 2025 - 1 Sept 2025
Amount
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately).
6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 : 2000
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete:
Ridges plain (500 - 600mm)
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
G.S. Sheet
Repairs to the existing damaged and sunken wooden false ceiling by cutting and disposing the damaged portion and realigning the balance false ceiling in position to existing frame etc, all complete as per the direction of the Engineer-in-charge. Note: Any new material used will be paid separately.
Credit for taking away recovered GS Sheets (unserviceable) in as in where basis.
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_280509.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .