GE/PNH-57/2021-22

Amount

Excavating in post holes (or similar holes) in any type of soil, each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-2 in 40 mm graded aggregate in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

S&F tubuler steel trusses including special shaped, heavy vertical post etc including special confirming to IS- 1161-complete including necessary welding, nuts and bolts complete all as specified and directed.

S&F mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E- 250) quality- A complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces including preparation, of any description exc 10cm in width or girth complete all specified and directed.

S&F pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screwed complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious and built in CM 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair face of brick work, surface finished even & smooth without using extra cement complete all as specified and directed .

M&L for peparation of new surface of walls and applying two coats of cement base paint over one coat of white wash complete all as specified and directed .

Supply, laying and testing in replacement of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core complete all as specified and directed.

All as per item No 10 above but of size 95 sq mm 3.5 core complete all as specified and directed.

All as per item No 10 above but of size 50 sq mm 3.5 core complete all as specified and directed.

All as per item No 10 above but of size 35 sq mm 3.5 core complete all as specified and directed.

All as per item No 10 above but of size 16 sq mm 4 core complete all as specified and directed.

All as per item No 10 but of size 10 sq mm 2 core complete all as specified and directed.

M&L for Dismantling of ACSR conductor any type ACSR conductor from pole including connecting all existing incoming and out going connections etc complete all as specified and directed.

M&L for dismantling of steel pole any type any size complete all as specified and directed.

M&L for dismantling of PCC pole any type any size complete all as specified and directed.

Design, supplying, installing, testing and commissioning LT outdoor double doortypeFeeder Pillarl board factory fabricated cubical kiosk type whether vermin proof with locking arrangement and made out of MS sheet 3.15 mm thick suitable size of channel for base complete with 400 Amps rated aluminum bus bar 32 mm thick chamber and cabinet for housing mounting switch disconnection fuze unit metering eqpt prewired with suitable size of copper conductor and duly painted with one coat of red oxide paint and two coat of synthetic enamel paint power coating mounted on PCC (1:4:8) platform commissioning washer chamber and panel board fixing an angle iron frame which is made out of 40 x 40 x 6 mm thick angle iron duly marked the incoming outgoing controls and comprising with the following:- (a) MCCB 200 Amps capacity 36 KA 4P, 415- Nos -01 Nos(incoming) Note: Workable space shoud be provided for operating.

M&L for earthing GI Strip complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

Excavation in trenches n.exc 1.5M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in soft/loose soil and getting out complete all as specified and as directed.

Removal excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed.

Supply and laying GI tubes light grade ISI marked , galvanized, 80mm bore laid in trenches or under floor or fixed with poles/ walls for protection of electric cable complete all as specified and as directed.

Supply and laying GI tubes light grade ISI marked , galvanized, 50mm bore laid in trenches or under floor or fixed with poles/ walls for protection of electric cable complete all as specified and as directed.

Supply and laying GI tubes light grade ISI marked , galvanized, 40mm bore laid in trenches or under floor or fixed with poles/ walls for protection of electric cable complete all as specified and as directed.

Approved quality clean dry sharp sand as in cushioning to under ground cable laying 15cm thick before laying and 8cm after laying the cable in trenches for cable cushioning, complete all as specified and directed.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

NATIONAL TRADING COMPANY

VIKAS ENTERPRISES

M/S KIRAN CONSTRUCTIONS

M/S KULBIR SINGH SODHI AND CO