Construction of Balance Work of Guest House at BGSBU Rajouri (Plastering, Flooring and Sanitary complete))

Amount

Earthwork in surface excavation not exceeding 30cm in depth but exceeding 1.5mtr in width as well as 10sqm on plan including disposal of excavated earth upto 1 mtr from cutting edge, lift upto 1.5mtr, disposed earth to be levelled and neatly dressed in All kinds of Soil

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed in all kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. in all kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Disposal of excavated material beyond 50 mtr and within 1 Km

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing & reinforcement- All work upto plinth level 1:1.5::3 (1 cement: 1.5 coarse sand :3 graded stone aggregate 20mm nominal size)

Providing and laying hand packed stone soling in foundation, under floors etc. including ramming, watering and consolidation complete. Cost and carriage of all materials involved utpo site of work complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 coarse sand :8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:5:10 (1 cement: 5 coarse sand :10 graded brick aggregate 40mm nominal size upto floor V level)

Reinforcement for RCC work including starightening, cutting, bending placing in position and applying a primer coat of approved steel primer all complete.

Centring and shuttering including strutting, propping etc and removal of formwork for suspended floors, roofs, landing , balconies and access platform

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) with making of groove between brick work and RCC

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) with making of groove between brick work and RCC

20 mm ornamental exterior Cement plaster of mix: 1 : 4( 1 cement : 4 coarse sand) with making of groove between brick work and RCC

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of KAJARIA, SOMANY or equivalent make as approved by Project Authority and Site incharge make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60cmx60cm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of KAJARIA, SOMANY or equivalent make as approved by Project Authority and Site incharge make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 80cmx120cm

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of KAJARIA, SOMANY or equivalent make as approved by Project Authority and Site incharge in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like KAJARIA, SOMANY or equivalent make as approved by Project Authority and Site incharge make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeering in Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Granite Jet Black/Chilly Red gang saw cut mirror polished (pre moulded and pre Polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels 16mm thick

Providing and fixing Granite Jet Black/Chilly Red gang saw cut mirror polished (pre moulded and pre Polished), machine cut for stair steps and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels 16mm thick

Providing and fixing Granite Jet Black/Chilly Red gang saw cut mirror polished (pre moulded and pre Polished), machine cut for floors of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels 16mm thick

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble I stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement@ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes prepartation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design : In 75x75 mm deep chase

Making khurras 45x45 em with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outletcomplete.

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angles 40x40x6mm for diagonal braces

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed.

Carriage of material including loading and unloading and stacking at site complete Sand for average distance of 130 KM by MT

Carriage of material including loading and unloading and stacking at site complete Crusher Sand for average distance of 35 KM by MT

Carriage of material including loading and unloading and stacking at site complete Brick Bat for average distance of 150 KM by MT

Carriage of material including loading and unloading and stacking at site complete 40mm nominal size for average distance of 35 KM by MT

Carriage of material including loading and unloading and stacking at site complete Soiling stone for average distance of 35 KM by MT

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid of make Hindware/Cera/Jaquar or as approved by site incharge

Providing and fixing ONE PIECE white vitreous china water closet (European type W.C . .pan) seat 300mm distance from wall and 10 litre capacity white vitreous china flushing cistern conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat cover of make Hindware/Cera/Jaquar or as approved by site incharge

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. centre hole mixture, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 660x460 mm of make Hindware/Cera/Jaquar or as approved by site incharge

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of make Hindware/Cera/Jaquar or as approved by site incharge

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink including waste coupling as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fitting sand brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required of make Hindware/Cera/Jaquar or as approved by site incharge Range of two urinal basins with 5 litre P.V.C white automatic flushing cistern of approved quality

Providing and fixing 100 mm CP grating for gully, floor or Nahani trap.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard Rectangular shape 453x357 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing toilet paper holder C.P. brass

Providing and fixing PVC pipes with necessary stays / clamps with fasteners of following dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent 160 mm dia

110 mm dia

75 mm dia

Providing and fixing PVC door bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 160 mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

100 mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

75 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC plain bend of required degree: 160 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent

100 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent

75 mm dia. working pressure 4kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC door Tee with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

75x75x75mm dia working pressure 4kg/cm2

Providing and fixing PVC reducer tee with PVC acess door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x75mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC Plain reducer tee insertion rubber washer 3 mm thick, bolts and nuts complete.

100x100x75mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC offsets working pressure 4kg/cm2 of make Supreme, finolex or equivalent 75 mm PVC off sets

110 mm PVC off sets

160 mm PVC off sets

Providing and fixing PVC collar: 110mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

75mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

160mm dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent

Providing and fixing PVC P/S/F trap of different dia working pressure 4kg/cm2 of make Supreme, finolex or equivalent complete, including cost of cutting and making good the walls and floors:

Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 12.5mm nominal size) 1:4 ( 1 cement: 4 coarse sand) 100mm dia.

75mm dia.

Providing & fixing PVC Cowl of make Supreme, finolex or equivalent

Providing and fixing Soap dish (C.P. brass) with bracket

Providing and fixing towel ring (C.P. brass)

Providing and fixing towel rail 600mm long (C.P. brass)

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc. (Internal work) of make Jindal/Surya Prakash of medium class or as approved by site incharge 15 mm dia. nominal bore (medium)

20 mm dia. nominal bore (medium)

25 mm dia. nominal bore (medium)

32 mm dia. nominal bore (medium)

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) of make Jindal/Surya Prakash of medium class or as approved by site incharge 25 mm dia. nominal bore

Making connection of G.l. distribution branch with G.l. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 32 mm nominal bore

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 15mm nominal bore of make DRP or as approved by site incharge

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 25mm nominal bore of make DRP or as approved by site incharge

Providing & fixing Brass gate ball valve of approved quality conforming to IS : 8931 of 32mm nominal bore of make DRP or as approved by site incharge

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore of make DRP or as approved by site incharge

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore of make DRP or as approved by site incharge

Providing and fixing C.P. Jet with connection pipe

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/cera/jaquar or as approved by site incharge

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.l. cover with frame (light duty) 455x610 mm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

40 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G. I. pipe etc.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per standard design 100 mm diameter S.W. pipe (a) Crushed

150 mm diameter S.W. pipe (a) Crushed

Providing installation and testing of geysor of approved quality and manufacture venus/Bajaj or equilant all complete 50 litres capacity

35 litre capacity

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Construction of Sump tank (over all external dimension 10'-0" L x 10'-0" B x 8'-0" H) complete with earth work cutting/dressing, de-watering operation, laying of 6" thick soling followed by 3 inch thick P.C.C. 1:4:8 mix and laying of R.C.C. raft/ floor, external/baffle walls and top covered with R.C.C. 6" thick slab with provision for 02 openings 1'-6" x 1'-6" and positioning of inlet/outlet pipes, cement plastered internally smooth cement finished with 1:3 mix complete and making of pump room of size over all external dimension 6'-0" L x 6'-0" B x 5'-0" H) with MS door and installation of two Nos 1HP pump of make Crompton with electirical connection as per design/drawing approved including loading, Unloading, all carriages leads & lifts etc. complete

MOHD SALIM DEV

Nazir Akbar