COMPREHENSIVE REPAIR IN MD ACCN OF JCO/OR, MES COLONY AND SUPPLY DEPOT AND REPAIR TO JOINERY, ROOF AND FALSE CEILING IN THE AOR OF AGE B/R-II UNDER GE (W) JABALPUR

Amount

Removing old tarfelt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM(1:4) mixed with liquid water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. (Note-WPC will be measured and paid for separately as "Supply only".)

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

Applying evenly a coat of blown type bitumen at the rate of 0.30 kg per square metre complete all as specified & directed.

M&L for APP modified polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gm/sqm) laid on primed surface by forced application complete all as specified & directed.

M&L for applying two coats of bituminous based aluminium paint on top of membrane @ 0.20Kg/Sqm complete all as specified & directed.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L for repair of patches on roof of APP modified polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gm/sqm) laid on primed surface by forced application including 10 mm plaster CM(1:4) mixed with WPC,a coat of blown type bitumen,two coats of bituminous based aluminum paint on top of membrane @ 0.20Kg/Sqm,including removing of old tarfelt, complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work as in Truss,Rafter,Purlin,Post,Fencing,rail,gusset plates of any description, complete all as specified and directed.

Dismantling framed timber scantlings in fillets, truss,rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismantling unframed timber scantlings in fillets, truss, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

M&L Mild steel works as in posts and struts,purlin,rafter,truss,Circular pipe, square section, angle iron, flat iron, Nut bolt,gusset plates etc, cutting tops to shape as directed, drilling holes, all necessary drilling, bolting or riveting, etc; including embeding in concrete and screwing etc. and similar work conforming to Fe-290 Gde E-165 .complete all as speicfied and directed by Engr-in-charge

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150)corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for Non asbestos fibre cement building boards 4 mm thick fixed or laid/ inserted to aluminium framework with screws fixed in flat or slope ceiling, complete all as specified and directed.

M&L for Solid PVC Wall Lining(wall Paneling) consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications and drawing

S & F in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc,with necessary connecting items, complete and making good to floor to match with existing specification complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)with necessary connecting items, complete all as specified and directed.

S & F, in repairs, PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 580x450 and brackets, complete all as specified and directed.

S&F in repair wall hung wash basin with full pedestal snow-white, complete all as specified and directed by Engr-in-charge.

S&F, in repair, one piece Europen Water Closet snow-white complete all as specified and directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union, overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair,15 mm dia Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair cast copper alloy, fancy type chromium plated sawn neck pillar tap,complete all as specified and directed.

S & F in repair bib taps cast copper alloy CP with butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed.

S & F in repair stop valves/angle cock cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F in repair cast copper alloy chromium plated shower rose fancy type fixed to 15 mm bore pipe complete all as specified and directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and directed.

S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and directed.

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed.

S&F in repairs for Towel Rail 600mm long of PTMT fixed with Towel Rail 600mm long of PTMT fixed with screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed .

S&F in Repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .

Taking up or down steel tubing and connections, including cleaning for refixing or removing from site, of size 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing from site, of size 20mm bore of pipe complete all as specified and as directed.

S & F 15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S & F 20 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

S & F in repair,25 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass threaded fittings for fixing taps and valves, complete all as specified and directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass threaded fittings for fixing taps and valves, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal from site (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed

S & F in repair of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints to wall complete all as specified.

S & F in repair of 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints to wall complete all as specified.

S & F in repairs PVC (SWR) bends 110 mm dia bore any radius with access door complete all as specified and directed.

S & F in repairs PVC (SWR) bends 75 mm dia bore any radius with access door complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (double Y) 110 mm dia equal or unequal complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access doorcomplete all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and directed.

Taking down shutter n exc 1.00 sqm of any description complete all as specified and directed by Engr-in-charge

Taking down shutter exc 1.0 sqm but n exc 2.0 sqm each of any description complete all as specified and directed by Engr-in-charge

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

S & F Steel window with side hung shutters incl projecting type hinges with steel handle , steel peg stay, complete with glazing bars, dovetailed and welded.or ventilators, fixed type, with glazing bar complete all as specified and directed.

S & F Steel window with side hung shutters incl projecting type hinges with steel handle , steel peg stay, complete without glazing bars cooler type window, dovetailed and welded.or ventilators, fixed type, complete all as specified and directed..

M & L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by Engr-in-charge

S & F powder coated (min thickness of powder coating 50 micron) Aluminium door, window,ventilator frame with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching with existing specification etc complete all as specified and directed

S&F powder coated(min thickness of powder coating 50 micron) aluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed.

S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitred cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as per specification & drawing and as directed by Engineer-in-charge.

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) to fill the frame & making good complete all as specified & directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) to fill the frame & making good complete all as specified & directed.

M&L for 35mm thick second class hard wood factory made flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed.

S&F Butt hinges stainless steel 100 mm long complete all as specified and directed.

S&F Butt hinges stainless steel 75 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F and in repair Aluminium handles cast type anodised of 150mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed.

Hacking out old broken glass (any the size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed by Engr-in-charge.

S&F 3 mm figured glass, pin head type and glazing with beads fixed with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S & F Sheet glass 4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L Solar control film 25 micron reflective type sticked to glass panes as per instructions of Manufacturers complete all as specified and directed.

M&L Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair 18/19 mm thick water proof block board of commercial quality Gde-I fixed with screws as kitchen , cup board box and shutters & shelves etc all as specified and directed.

S&F in repair 18/19 mm thick repair Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 6mm thick first class HW lipping overall edges, fixed with GI nails etc complete all as specified and directed.

M&L 6 mm thick cover fillets of standard hard board ,40 mm wide and fixing with screws complete all as specified and directed.

S&F, 1st class HW Beads, straight ( 20 mm size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to store (Plain or moulding as requirement) complete all as specified and directed.

S&F 30 mm wide Steel Continuous (piano) hinge, steel bright finish or electro galvanised etc complete all as specified and direcated

S&F in repair 40 mm dia , SS cupboard knobs fixed with nut ,screw and washer of mild steel bright complete

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete including necessary welding if fixed in steel door.complete all as specified and directed by Engr-in-charge

S & F in repair Hasp and staple 75 mm , stainless steel, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge

M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kg complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length , on metal of thickness n exc 6 mm , for fixing of door hing, door spring , welding in iron doors complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290 Gde-E-165 complete all as specified and as directed.

S & F in repair curtain rod stainless steel with brackets for each, stops, rollers etc. and fixed in position complete all as specified and as directed.

S&F in repair 18-20 mm thick Acrylic Pvc Celuka Board,prelaminated one side with decorative choice lamination & other side balancing white lamination approved texture as in kitchen cabinet,Cupboard etc ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and directed by Engr-in-charge

Material & Labour for stainless steel (Grade SS-304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement as in kitchen basket in various type of basket,plain basket,thali basket, height cup saucer, and perforated cutlury basket,etc all specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified & directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified & directed.

M&L light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified & directed.

M&L light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified & directed.

M&L non skid coloured ceramic tiles 300x300/400x400 mm x 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

M&Lnon skid coloured digital ceramic tiles size of tiles 450x350/300x600x7mm thick vertical surface such as in skirting/dado etc, laid over and including 10 mm thick cement plaster in CM 1:4, complete all as specified and directed.

M&L for zed granite Black Work 18 to 20 mm thick (table rubbed and polished ) as in cooking platforms, and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab complete all as specified and directed.

M&L for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone laid over and including 15 mm thick screed bed of CM (1:4) , as in tread and riser of staircase,steps , jambs, pillars, window- cills, complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Material and labour for 60 mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-35 grade with grey cement and pigment, conforming to IS 15658-2006, laid over and including 50mm thick cushioning of river sand/M-sand complete all as directed.

Material and labour for 80 mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement and pigment, conforming to IS 15658-2006 laid over and including 50mm thick cushioning of river sand/M-sand complete all as directed.

M&L for Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cm in thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection,flooring etc,complete all as specified

M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in leveling course including demolition of existing PCC complete all as specified and as directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subbase, Hard standing and similar works complete all as specified and as directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Ditto all as per Srl item No above but except brick

Brickwork with fly ash sub-class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6),complete all as specified and directed.

Dismantling of Stone slabs and kota stone,Cuddappa stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over Screed bed or bedding layer of cement mortar(1:6), 15 mm thick for laying floor finishes, including rubbing and mirror polishing complete all as specified and directed

M&L Machine cut kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over 10 mm thick cement plaster (1:4), on fair faces of brick work or concrete surface as backing, including rubbing and polishing complete all as specified and directed

Supply and fix in repairs PLEATED blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6, including taking down old cement plaster,complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick (10mm, CM 1:6 + 5 mm(CM 1:4) ) thick on fair faces of brick work or concrete surfaces in CM 1:4 in two layers on external surface even & fair and using integral water proofing compound.

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3 finished even and smooth without using extra cement,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper over alkali resistant priming paint over and including 2 mm thick wall care putty, complete all as specified and directed

M & L for preparation of new plasterd or unplastered surfaces of Ceiling and applying two coat of oil bound destemper, over alkali resistant priming paint, complete all as specified and directed

M & L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over Priming plastered and other surfaces with alkali resistant priming paint complete all as specified (Note;- height upto 15 mtr )

M & L for preparation of new plasterd or unplastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M & L for preparation of new plasterd or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed

M &L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg two coat of synthetic enamel paint any tint over pink primer complete all as specified and directed.

M &L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint of any tint over a coat of red oxide primer complete all as specified and directed.

Complete removal of existing treatment of wall surface complete all as specified and directed.

M&L preparation of old plastered wall surfaces and including applying 2 mm thick wall care putty to get smooth and even surfaces of wall including Priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M & L for 1st coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

M & L for subsequent coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

M & L for preparation of old plasterd or unplastered surfaces of ceiling and applying one coat of oil bound destemper complete all as specified and directed

M & L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new or old surfaces, height upto 15 mtrs complete all as specified and directed by Engr-in-charge.

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.

M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embeded in concrete, complete all as specified and directed by Engr-in-charge

Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as speicfied and directed by Engr-in-charge

M&L for plain cement concrete type B2,1:2:4 (40 mm graded stone aggregates) as in post holes complete all as speicfied and directed by Engr-in-charge,

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as speicfied and directed by Engr-in-charge

Supply only Chain link MS galvanisd fencing, any size or type complete all as speicfied and directed by Engr-in-charge

S&F,Round Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified by Engr-in-Charge

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling plugging holes etc. in apron complete all as speicfied and directed

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as speicfied and directed

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as speicfied and directed

Material and labour for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately)

Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete

S&F in repair for stainless steel kitchen plate rack 0.56 mm thick of standard pattern SIZE (31"X36"X10") three tier ISI marked, including all fittings all as specified and as directed.

Dismantling water tanks capacity exc 250 Ltr but n exc 500 Ltr and removing from site all as specified and directed.

Dismantling water tanks capacity exc 500 Ltr but n exc 1000 Ltr and removing from site all as specified and directed.

Taking down or taking up steel water tubing , galvanised from trenches / walls / floors including all fittings, segregatting and stacking the serviceable pipes and fittings properly at site for re-use all as specified and directed for following bore of pipe :

Refixing old steel tubing and connections in new or old position (Walls, ceiling,floors etc all as specified and directed)

S&F cupboard magnet closer hinge handle as per direction by engr in charge

Material & Labour for suspended false ceiling system using Chicago metallic (E grid) exposed suspended system of grid, section size 600 mm x 600 mm comprisisng of GI powder coated main 39 mm x 24 mm x 0.80 mm thick (thickness comprising of GI / 0.40 + PPPCGS / 0.30) Cross Tee 29 mm x 24 mm x 0.80mm thick and wall angle 22.2 mm x 22.2 mm x 0.65 mm thick with and including 4 mm thick HPSC (High pressure steam cured) pre-primed and one faced painted self imposed textured designer board to be placed in the grid system duly suspended with 4 mm dia GI bar hangers fixed with steel dash fasterners from purlins of the roof with clips including provn for light fixture complete all as specified and directed.

Schedule of credit amount of Rs 2,22,300.00 to be deducted during AOC

Tiki Water proofing Co (BID ID -3445533)

DOBARIA BUILDCON (BID ID -3446471)