Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹2.9 L
EMD Value
₹6,000
Closing Date
18 Nov 2023, 4:00 pmClosed
EX ENGINEER JAL SHAKTI MECH DIV SGR
OFFICE OF THE EXECUTIVE ENGINEER JAL SHAKTI PHE MECHANICAL DIVISION SRINAGAR
Electro-Mechanical Works at water Supply Scheme Lal Ded Hospital Srinagar
2023_PHE_236104_1
PHE/MECH/e-NIT-63 of 11/2023-24
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
20 days
Lal Ded
As Per NIT
2 documents required · 2 mandatory
₹100
Yes
EX ENGINEER JAL SHAKTI MECH DIV SGR
₹6,000
Yes
20 Nov 2023
7 Nov 2023
20 Nov 2023
7 Nov 2023
18 Nov 2023
7 Nov 2023
Amount
Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. 19.5.5 100 mm and 150 mm dia. G.I. pipes
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.6.1 All kinds of soil : 45x0.45x0.45= 9.11cum
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. 80% of 9.11cum= 7.29 cum
Providing and fitting of flanges of ND 125MM required for connecting the above rising main. The flanges shall be as per specification laid in Table 5 of IS:6392-1971. The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make.
Providing and fitting of M16 x80 size bolts with Hex Nuts.
Providing of natural rubber gasket for flanged joints with nominal sizes as under: 125mm, 3mm thick
Providing, installation and testing of manual type chain pulley block. The main specifications of C.P Block are given below : Make:- Indef (P-Series) Capacity = 2 ton No. Of load chain falls = 2 or above Min. Height of lift = 6 M The job includes P/F of Wire Rope of 2 mtr Length including wire rope U-Clamps for fitment of the chain pulley block to existing bridge girder. Testing/Inspection Certificate is mandatory and is to be produced at the time of supply of material
Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 for Submersible Pumping Unit and other electrical Equipment. The cable connections terminal shall be fitted with copper thimbles of required size. Size:- 10 sqmm
Providing and fitting of 2.5 SQMM Copper cable to be fitted from pumping equipment to Pump monitoring unit in control Panel. The wire should be of 4 different colours.
M/S MIR ELECTRICALS and MECHANICAL ENG WORKS
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .