Laying of 160 mm Dia HDPE Pipeline for Providing Water Supply to D and B Type Quarters at NIT Warangal

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Engaging of Earth work excavator for road cuttings,hard soil excavation during laying of HDPE pipeline

Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.). 160mm dia(8.0 kg/sqm SDR 17)

Laying and jointing of HDPE pipes in ready made trench by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing from time to time to the alignment and gradient and testing 160mm dia

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. BENDS OD 160 mm

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. Tees OD 160 mm

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. reducer OD 140 mm x 160 mm

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. Pipe ends long neck 160mm dia

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes.MS Flanges 160mm dia

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 -1995 including transportation to anywhere in T.G. Excluding taxes. Supply and Fixing Electro Fusion Tapping saddle complying with BS EN 12201-3-2011, PN 12.5 rating & WRAS approved raw material as per BS 6920, manufactured from virgin resin of PE-80/PE-100 having blue/black colour using food grade compounded raw material for usage in drinking water system and having working pressure of 10 bar. The cost shall include testing of all materials, labour, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking, providing and fixing etc. Complete as specified and directed by the Departmental Engineers, but excluding of all taxes. SIZE 160 x 1”