REPAIRS TO FENCING GATE BOUNDARY WALL FOOTPATH AND DRAINS AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed.

Demolition of reinforced concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) of shelves, platforms, jaffri and similar work etc complete all as specified and directed.

Demolition of concrete in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling posts or struts (Wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground (posts embedded in concrete, brick work, masonry work, etc.) complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base, foundation filling and mass concrete etc. complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in as surface channel, etc for drain and similar works complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in benching, coping etc for drain and similar works complete all as specified and directed.

M&L for PCC 1:3:6, Type C2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete as in boundary pillars and post etc complete all as specified and directed.

M&L for 25mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, initered/stopped ends complete all as specified and directed.

Add or deduct from item No. 14.00 above for each 25mm girth or part thereof over or under 30cm for forming fair finished drain complete all as specified and directed.

M&L for Brick work with fly ash bricks (modular brick) straight or curved on plan exc 6 m mean radius built in cm 1:6 complete all as specified and directed.

M&L for stone walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick works or concrete surfaces in cm 1:4 finishing even and smooth without extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed.

M&L for Factory made, machine pressed, M-40 grade concrete interlocking paver blocks (glossy/reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 80 mm thickness with & including 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed.

Taking down old paver blocks any shape, size and thickness from the existing surface and refixing at the same place after levelling the ground by using sand for maintaing camber and slope complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Chequered paver tiles reflective/glossy type, any colour as decided by GE, size- 300mm x 300mm x 20 to 25mm thick, set, jointed and pointed in neat cement slurry in floors, etc with & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Use & waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for fair finished flat surfaces of concrete complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 26.00 here in before but 6mm to 8mm

M&L for Reinforced cement concrete design mix M-25 grade as in slabs supported on walls, beams & columns complete all as specified and directed.

S&F Rolled mild steel conforming to Fe-290 (Gde E-165) as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets( for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5 cm long. (Diameter of neck in 11 to 15 mm) complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link MS galvanised fencing, any size or type including dismantling old rusted/broken fencing complete all as specified and directed.

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including dismantling old rusted/broken wires complete all as specified and directed.

Excavating in post holes (or similar holes) in hard or dence soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

S&F mild steel work as in holdfast conforming to Fe-290-Gde-E-165 complete all as specified and directed.

S&F Framed work such as grills, gratings, steel gate, purlin etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 gde E-165 complete all as specified and directed.

Preparation of old decorated surfaces of wall including brooming, scraping down moulds, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying one coat of cement based paint, white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on wall surfaces complete all as specified and directed.

M&L for Preparation new steel surface of any description and applying two coats of synthetic enamel paint over one coat of red oxide, zinc Chrome primer complete all as specified and directed.

M&L for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type or cranked hook bolts complete all as specified and directed.

M&L for Cutting holes in brick walls exc half brick but not exc one brick wall built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in ridges, etc, fixed with & including self tapping screws complete all as specified and directed.

M&L for Mild 1.60 mm steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for 300 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Demolition and breaking up drain pipe of 300 mm internal (SGSW) pipe/PVC/RCC set in cement mortar and disposal of unservicable material and rubbish to a distance not exc 100m complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed.

M&L for 50 mm Sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and directed.

M&L for Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in louvers and jallies 35mm thick (measured solid) including all mouldings but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) In precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area in exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

M&L for providing precast cement concrete kerb stones/apex stones etc in PCC 1:2:4 type B1 (using 20 mm graded stone aggregate and set in cement mortar 1:4 complete all as specified and directed.

M&L for painting lines, dashes, arrows etc. on road side kerb stone, and the like, white, yellow or black, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 54,750.00