Loading…
Loading…
Tender Value
Refer Docs
Closing Date
16 Sept 2026, 3:00 pm6d left
Prince Kumar (EO)
Executive offcer
NAGAR PANCHAYAT SINGHIA
PRINCE KUMAR
Executive officer
EXPRESSION OF INTEREST (EOI) FOR EMPANELMENT OF AGENCY FOR COMPREHENSIVE REPAIR AND MAINTENANCE OF EXISTING WATER SUPPLY SCHEME UNDER NAGAR PARISHAD ROSERA, SAMASTIPUR (BIHAR)
139365
NPROS-EOI-09/2026-27
Open Tender
GENERAL
Samastipur
• Name of Firm/Agency
• Registered Address
• Phone No
• Email Address
• Type of Organization
• Name of Proprietor/Partner/Director of Organization/Firm
• Pan Card
GENERAL
ITEM RATE
L1
1
11 documents required · 11 mandatory
Office of the Executive Officer Nagar Parishad Rosera
5 Sept 2026
5 Sept 2026
21 Sept 2026
10 Sept 2026
16 Sept 2026
10 Sept 2026
14 Sept 2026
FINANCIAL SHEET
Tender Inviting Authority: Executive Officer, Nagar Parishad, Rosera
Name of Work : EXPRESSION OF INTEREST (EOI) FOR EMPANELMENT OF AGENCY FOR COMPREHENSIVE REPAIR AND MAINTENANCE OF EXISTING WATER SUPPLY SCHEME UNDER NAGAR PARISHAD ROSERA, SAMASTIPUR (BIHAR) (PERFORMA FOR SCHEDULE RATE FOR PROVIDING MAN POWER SERVICES AS AND WHEN AND WHERE REQUIRED WITH EQUIPMENTS AND MACHINERIES FOR COMPREHENSIVE REPAIR AND MAINTENANCE OF WATER SUPPLY SCHEME UNDER NAGAR PARISHAD ROSERA, SAMASTIPUR.)
Financial Bid should indicate following information:
1 Name of Firm/Agency:
2 Registered Address:
3 Branch Address, If any:
4 Phone/Fax No:
6 Type of Organisation:
(Whether legally constituted Proprietary/Partner/Private Limited/Limited/Corporate Body Attached Proof)
7 Name of Proprietor/Partner/Director of Organisation/Firm:
FINANCIAL BID-A
Sl.No Component of Rate Statement Rated Quoted by Bidder ( both in figure and word)
1 Basic wages including Variable Dearness Allowance (VDA)( Rate per person for one day) “Minimum wages” must be followed as per Govt. of Bihar Minimum wages act (as per SOR BCD 2022)
a Operator-cum-Chowkidar 436.00
b Plumber (Welder) – 1 No 551.00
c Electrician- 1 No 551.00
d Fitter-cum-mechanic – 1 No 551.00
e Mason – 1 No 551.00
f Helper – 1 Nos. 436.00
2 Rate for Minor Repairing (excluding manpower cost)
a) Repairing of Motor Pump (Per HP) Rate quoted by bidder
b) Repairing of Starter FSAD (Fully Automatic Star - Delta) 415 V, 50 Hz Based on MRP Bidder shall quote rate below on MRP
i) Start Push Button
ii) Stop Push Button
iii) Volt meter
vi) Start Capacitor
vii) Running Capacitor
viii) Push to Volt
xi) Terminal Block
c) Installation of New Starter (Single/Three Phase of standard brand like Crompton /L&T /BCH etc.
d) Repairing of Stabilizer
e) Restoration of Rising Main/Delivery Main (per meter) Rates Based on SOR of BCD/PHED and other works department
HDPE Pipe 63 mm As per latest SOR/approved rate
HDPE Pipe 90 mm As per latest SOR/approved rate
HDPE Pipe 110 mm As per latest SOR/approved rate
G.I. Pipe 50 mm diametre As per latest SOR/approved rate
G.I. Pipe 65 mm diametre As per latest SOR/approved rate
G.I. Pipe 80 mm diametre As per latest SOR/approved rate
f) Repairing of Pump Chamber (per Sq feet) Rate quoted by bidder
g) Leakage detection & repairing in distribution network (per leakage point) As per latest SOR/approved rate
h) Laying of new pipes in water distribution network (per meter) Approved Rate based on SOR of BCD 2022/PHED/Other Work Dept. Rate
HDPE Pipe 40 mm ( PE 100 - PN 08) As per latest SOR/approved rate
HDPE Pipe 50 mm ( PE 100 - PN 08) As per latest SOR/approved rate
HDPE Pipe 63 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 75 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 90 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 110 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 125 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 140 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 160 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 180 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 200 mm ( PE 100 - PN 10) As per latest SOR/approved rate
HDPE Pipe 225 mm ( PE 100 - PN 10) As per latest SOR/approved rate
G.I. Pipes 15 mm diametre As per latest SOR/approved rate
G.I. Pipes 20 mm diametre As per latest SOR/approved rate
G.I. Pipes 25 mm diametre As per latest SOR/approved rate
G.I. Pipes 32 mm diametre As per latest SOR/approved rate
G.I. Pipes 40 mm diametre As per latest SOR/approved rate
G.I. Pipes 50 mm diametre As per latest SOR/approved rate
G.I. Pipes 65 mm diametre As per latest SOR/approved rate
G.I. Pipes 80 mm diametre As per latest SOR/approved rate
i) Provision for PCC road cutting & its restoration (cum meter) As per latest SOR/approved rate
j) Ferrule replacement (C.I. Brass ferrule with mouth cover As per latest SOR/approved rate
15 mm nominal diametre As per latest SOR/approved rate
20 mm nominal diametre As per latest SOR/approved rate
25 mm nominal diametre As per latest SOR/approved rate
h) House Connection/ Stand post repairing As per latest SOR/approved rate
i) Providing and lying MDPE pipe 20 mm diametre nominal bore: 6m with proper position including all specials by compression fitting/electrofusion all complete. As per latest SOR/approved rate
ii) Providing & fixing GI Pipe complete with GI fittings and clamps all complete - 15 mm nominal bore As per latest SOR/approved rate
iii) Brass Ferrule with mouth cover- 15 mm nominal diametre As per latest SOR/approved rate
iv) Female adopter for adjoining the ferrule to MDPE pipe As per latest SOR/approved rate
v) Female adopter for adjoining the MDPE pipe to GI pipe As per latest SOR/approved rate
vi) HDPE electro fusion service saddle including all complete job as per direction of E/I As per latest SOR/approved rate
vii) Brass bib cock of approved quality: 15mm nominal bore As per latest SOR/approved rate
viii) Plastic bib cock approved quality: 15mm nominal bore Quote discount on MRP
i) Providing new house connections from water supply distribution line all complete as per standard As per latest SOR/approved rate
j) Restoration work Check Valve/Stop Valve/Gate Valve As per latest SOR/approved rate
k) Repairing of Gate Valve Chamber/Sluice Valve Chamber in respect of distribution network As per latest SOR/approved rate
l) Repairing of OHT/PVC Tank (per litre capacity) As per latest SOR/approved rate
m) Cleaning of OHT/PVC Tank (per 1000 litre) As per latest SOR/approved rate
n) Repairing of Steel/RCC Staging Structure work (per kg steel) As per latest SOR/approved rate
o) SCADA/IoT repairing & restoration As per latest SOR/approved rate
p) Any other (please specify) Quote discount on MRP
Any other (please specify)
3 Rate for Minor Repairing (excluding manpower cost) Based On Estimate by Urban Local Body Agency shall quote discount in percentage based on estimated cost
a) Installation of new boring in case of bore failure and networking with raising main
b) Installation work of new Motor
c) Installation of new OHT/PVC Tank
d) Construction/Installation of new Steel/RCC staging
e) Extension of distribution network along with house connection
f) Restoration of damage pipeline more than 100m length during natural calamity
g) Change of filter media metre of IRP as per manufactures guideline
h) Installation of new electric transformer
i) Any other major work related to Water Supply Scheme not mantioned above.
4 Equipment Rate (excluding Labour Cost) Paid against GST Bill by the Selected Agency
Sl. No. Equipment (Including Fuel and all types of manpower and other charges)
1 Backhoe Loader (JCB) (Per Hour)
2 Skid Loader (Per Hour)
3 Crane (Per Hour)
4 Jack Hammer (Per Day)
5 Pump Set (Per Hour)
6 Tractor (Per Hour)
5 Total Cost for a Day 1(a)+1(b)+1(c)+1(d)+1(e)+1(f)
6 GST ( Goods & Services Tax ) On Sl.No.2 & 5- as per latest GST Rate
7 Total Cost of Service for a day (Bidder should quote rate in rupees as a service charge for a day of mentioned work above) On Sl. No.2 + Sl.No.5
(i) EOI will be evaluated on basis of lowest (L1) of Agency total bid value of (Sl. No- 5 & 7) quoted by the bidder.
(ii) All the technically qualified bidders will be empanelled for the above work on L1 rate and an undertaking for the same
will be taken from the bidder at L1 rate. The work will be given to other empanelled bidder only if L1 bidder will not
agree to perform the task.
(iii) In case of revision of minimum wages (Sl. No-1 above), bidder has to pay its employees as per the latest minimum wage
circular issue by Govt. of Bihar.
(iv) GST and other taxes rates will be as per latest govt. rules
(v) Total no of man power may be vary from time to time and it may vary as per requirement. The undersigned reserves
the right to reduce or increase the manpower deployment, if considered necessary.
(vi) Minor and Major repairing work mentioned in Sr. 02. & Sr. 03 are not exclusive. The purpose of this financial bid is to
obtain quote of maximum number of items/work. Any kind of work (minor/major) or items not mentioned in the above
list if required in future shall be done/supplied by Agency based on prevalent market price or SOR released by different
works department of Govt. of Bihar
Name and Signature of the authorized
Person of the Firm along with seal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
RFP Nal Jal_0001.pdf
NIT • 12.55 MB
Financial Sheet.xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .