Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC SINCE LOWEST BIDDER | |
| 2 | L2₹27.6 L+₹31,396.40 (1.15%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT LOWEST BIDDER | |
| 3 | L3₹27.8 L+₹56,868.70 (2.09%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT LOWEST BIDDER | |
| 4 | L4₹28.9 L+₹1.6 L (5.92%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L4 | Rejected-Finance SINCE NOT LOWEST BIDDER | |
| 5 | L5₹28.9 L+₹1.6 L (5.97%)Rejected-Finance | L5 | Rejected-Finance SINCE NOT LOWEST BIDDER |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
3 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR CANTT
HQ CWE ASR OLD CANTT
SPL REPAIR TO BLDG NO P-17 OR MD ACCN AT KHETRAPAL ENCLAVE AT NAMS UNDER GE NAMS
2022_MES_565448_1
CWE/ASR-50/2022-23
Open Tender
Civil Works
Item Rate
180 days
NAMS
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE NAMS
₹62,000
Yes
7 Feb 2023
26 Nov 2022
5 Jan 2023
26 Nov 2022
3 Jan 2023
22 Dec 2022
Amount
M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete including demolition of brickwork /stone built in cement mortar etc complete all as specified and as directed.
All as per above Srl Item No 01 here in before but except bricks complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and as directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.
M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) including WPC as per user manual complete all as specified and directed. (WPC shall be measuared seperatly and paid @ 200ML for 50kg cement bags or as per manufacturer's instructions).
Supply only liquid WPC complete all as specified and as directed.
M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and fair w/o using extra cement, complete all as specified and directed.
M&L for three coat of white wash including preparation of new plaster surface of ceiling complete all as specified and directed.
M&L for two coat of oil bound distemper over one coat of primer on new plasterd surfaces of walls, pillars cornces etc incl prepartion of new plastered surfaces through electrical operated grinder complete all as spd and directed.
M&L for applying two coats of cement base paints over one coat of primer on walls etc, incl preparing new surfaces of walls by brooming down or by steel wire brushing complete all as specified and as directed.
M&L for applying one coats of oil bound distemper by spray machine incl preparation of old surface by complete removal existing treatement on walls through electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.
M&L for applying one coats of cement base paints on walls etc, including preparing old surfaces of walls by brooming down or by steel wire brushing as directed by EIC.
M&L for one coat of white wash incl preparation of old plaster surface of ceiling complete all as specified and directed.
M&L reparing of RCC projection, chajja, roof facia, celling by scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster 1:3 one or two layer as reqd or PCC 1:2:4 as directed by Engr-in-Charge with or without facia and smooth finished and smotth edges in any height and any situation including necessary form work and demolition of old RCC projection complete all as specified and directed.
S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.
S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples / beading complete all as specified and directed.
S&F for rotational moulded polythene 500 litres water storage tanks cylindrical vertical with closed top hoisted and fixed in position inclusive 20 mm dia float valve with aluminium fitting. All as specified and directed including old disconnecting and taking down complete all as specified and directed.
M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.
All as per Srl item No 19 above but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed.
S&F Coloured/printed glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles 0.06 to 0.16 sqm, in invertical surfaces(skirting/dado) including 10mm thick cement plaster in CM 1:4 .including dismantiling old tiles complete all as specified and directed.
M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding, rounding of edgeing and dismantling complete all as specified and directed.
M&L MS framed work such as grills, gratings, guardbar with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs.
M&L for green marble 15-17 mm thick over cement screed bed laid on 10 mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps,riser incl rubbing and polishing incl moulding rounding to edge of marble & dismantling complete all as specified and directed.
Material and labour for providing 75 mm thick cement concrete (1:3:6) type C2 using 40mm graded aggregate as in plinth protection surfaces even and smooth without using extra cement all as specified and directed.
M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) including taking down old frame any type complete all as specified and directed.
S&F 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats ncluding taking down old shutter any type complete all as specified.
M&L for preparation of new wooden Surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified as directed.
M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetics enameled paint complete all as specified and directed.
M&L preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in hold fast etc including necessary form work complete all as specified and directed.
S&F for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls etc incl taking down old pipe complete all as specifed and dirtected.
S&F for 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F for 110mm bore PVC pipes single socketed "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
All as per ser item No 35 above but laid in trench or in floor complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm dia with access door complete all as specified and directed.
S&F PVC(SWR) vent cowl 110mm dia complete all as specified and directed.
S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .
S&F for 110mm bore PVC bends/junction any radius complete all as specified and directed. .
S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.24(a) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads and two coat of synthetic enamel paint over a coat of red oxide on wooden surface incl taking down shutter & cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B1 /cement plaster 1:4 as require and make finish good to the existing surface & incl the following builders hardware contain each shutter :- (i) Three x MS butt hinges, cold rolled mild steel 100mm long (ISI Marked) with welded or screwed as required. (ii) Two x aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked). (iii) Two x aluminum handles cast type anodized 150mm long (ISI Marked). (iv) One x aluminium alloy, anodised, sliding door bolt of 250mm long & 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
M&L, for rendering 10mm thick in CM 1:3 with WPC in sunken slab incl one coat of bitumen @ 1.20 kg/sqm incl cleaning of surfaces complete all as specified and directed.
M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.
M&L, cement concrete 1:7:12 (40 mm graded aggregate ) in lean concrete including demolition complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl taking down old shutter complete all as specified and directed.
S & F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, 75mm, type C-21 complete all as specified and directed.
S&F for aluminum handles cast type anodized 100 mm long (ISI Marked) complete all as specified and directed.
S&F for 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed.
S&F in repair, 300 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd.
M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass,fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 and Two coat of synthetic enamel paint to MS window and guard bar including taking down old ventilators complete all as specified. NOTE : Sheet glass shall be measured and paid Separately.
S & F in repair 18/19 mm prelaminated particle board, exterior grade, prelaminated Both side with decorative choice lamination & othe side balancing white lamination, fixed with 50mm screws/welding the any type of frame work complete all as specified and directed.
S&F Hasp & staple 125mm aluminium anodised complete all as spd and directed.
M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.
M & L for PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring including demolition complete all as specified and directed.
M&L for broken bricks hard core gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces.
S&F for 15 mm bore GI tube medium grade freed to wall or under floor incl taking up or down old tube complete including cutting closes and make good in CM 1:3 complete all as specified and directed.
S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.
Fixing only in repair steel tubing and connection 20 mm dia bore to wall and laid in floors incl taking up or down old tube and cleaning for refixing .
S & F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.
S & F in repair Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.
S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.
S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in -charge.
S&F in repair PVC waste pipe 32 mm to 40 mm dia (corrugated) for wash hand basin/sink fixed in repair complete all as specified and directed.
S & F Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
M&L for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.
S&F for PVC connections 45cm long superior quality with PTMT nut on both side complete all as specified and directed.
S&F in repair brass chromium plated pressure adjustable shower rose 125mm size fancy type with revolving joints incl shower arm 190mm and fixing to steel pipe or union complete all as specified.
S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directed.
S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.
S&F in repair stainless steel plate Rack 1mm thick size 750x750x250mm weight not less than 7.5 kg with folded edge gloss finish complete all as specidied and directed.
S&F in repair sinks made of stinless steel 1 mm thick kitchen or laboratory with drainage board of size 915 x 460 mm with plugs, washers and wastes; incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm and connecting union to pipe, overall size 495x420 mm bowl size 410 x 330 x 160 mm complete all as specidied and directed.
M &L toilet paper holder stainless steel recessed type complete all as specified and directed.
S&F glass shelf(500x125mm)with brass bricket compleate all as specified and directed.
S&F Ball valves brass insert ,bore size 20mm fixed with GI tubeing all as specified and directed.
S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) coomplete screwed for iron pipes in repairs complete all as specidied and directed.
S&F harrison rails Aluminum Curtain Rails colour powder coated 25mm size with brackets including screws fixing of walls complete all specified and directed.
M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed by engineer -in-charge. Make : Asian paint, Sika, Fosroc etc.
M&L 40mm thick Cement concrete type B-1, 1:2:4 (12.5mm graded aggregate)including prepration of old surface,scraping ,washing,boorming,chipping etc complete all as specified and direct by Engineer-in -charge.
S & F in repair for viterous china wash hand basin white angle back/corner size 400x 400 mm incl cp waste coupling waste pipe and plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) complete all as specified and directed.
S&F floor door stopper 140mm of aluminium alloy body and touge anodised, with hard drawn steel spring fixed and complete all as specified and directed.
Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each and refixing in same opening after repair complete all as specified and directed.
M&L Providing, cement concrete type B-1, 1:2:4 (20mm graded aggregate)as in hunching, coping , benching etc complete all as specified as directed.
M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed by Engineer-in -charge. Note - Reinforcement shall be measured and paid separetly
S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0 complete all as specified and directed by Engineer-in -charge.
Taking down aluminium/copper point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed
M & L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded copper conductor cable in old PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate)
One light / bell piont/ Fan point/ Exhaust fan point controlled by one 5 Amp switch one way.
All as per Srl item No 89 above but on the Indepedant board completeall as specified
All as per Srl item No 89 above but on the same board completeall as specified
All a per item No 89 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper conductor connecting to common earth dolly complete.
Supply and fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.
Supply and Fixing socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed
Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed
Supply and Fixing socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed
Supply and Fixing switch type regulator 5 step 230 volts 100 Watts AC complete all as specified and as directed
Supply and fixing ceiling rose 65/50 mm two to three terminals complete all as specified.
Supply and fix MCB 40 Amps single pole with neutral 10 KA, AC 230 Volts complete all As specified and directed.
Supply and fix MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.
Supply and fixing in replacement Sheet metal enclosure for DB's when MCB's to be used single door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 8 ways complete all as specified
Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of not less than 25 mm dia size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit not less than 25 mm dia will be measured as a one unit.
All as per item No 99 above but for 4.0 sqmm complete all as specified and directed.
Material and labour of lamp holder insulated body with 9 Watt LED Bulb, back plate batten/angle type for batten fitting fixed on bakelite sheet 100mmx100mm 230V AC cool day light 6500K having maximum height 1020 mm heavy duty complete all as specified. make:- havells/ssk/cona/indo asian/legrand/anchor
S & F in repairs, installation, commissioning and testing Polycarbonate ASTA CPRI approved OEM made Meter Panel including cutting the wall to make concealed including cement work and color wash to match with exiting. The Panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4:Meter Panel (Mini. Size 600 x 600 x 170 ) Wall Mounted type on Mounting Structure RAL 7016. The Meter Panel should be anti-acid, anti corrosive & Fully Transparent Door for meter Vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of his CPRI TEST REPORTS with Short Circuit Test of POLYCARBONATE only also share panel assemble by OEM, channel partner or sister concerned assembly will not accepted. DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane and Enclousers make Hensel/Clipsal. The manufacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI report shall have mention of following tests performed and passed out satisfactorily Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak, short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits and submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. The panel should passed glow wire test 960oC in accordance with 60695-2-11 [flame retardant and self-extinguishing. One Main Incomer MCCB 100A TP 25KA Thermal /Magnetic Release with spreader link. MCCB/MCB Nob Operated by Flip Cover. Indicator Provided on each phase. Provision of Four Nos Single Phase Sub-Meters in Panel. Provided Output supply by MCB DP 40Amp 4 Nos. Meter Enclosures & Enclosures Accessories as per RAL 7035. Ten Nos Terminal Blocks Provided for output Supply all as specified and as directed. Make- Hensel/Rittal/Emitter/Schneider/ABB. NOTE:- Rates of main incomer MCCB 100 AMP and MCB DP 40 AMP 4 Nos is included in quoted rate and no extra paymentwill be made for it.
Supply and fix exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers all as specified and directed.
Supply and fixing of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet 230 Volts made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed.
Supply & fix LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240, 50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.
Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge
Supply, laying in trenches or wall and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.
Excavation trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for and getting out in any of soil complete all as specified and as directed.
Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed.
Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified.
Supply,laying & fixing in replacement double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints, Sockets, Elbows, bends and End caps etc. all as specified and directed by Engr in Charge of size 63mm outer dia and 50 mm inner dia.
Supply and lay on wall/ floor etc GI pipe light grade of dia 32 mm for protection of cable all as specified and directed.
Taking down ceiling fan/geyser/exhaust fan in situ and refixing after servicing, repairing and painting them,Scratching old paint and preparation of surface for painting with one coat of white / grey enmeled paint and including cable from ceiling rose to fan complete all as specified and as directed.
Taking down old meter and refixing them in new meter panel and make necessary connection to bus bar and MCB DP in meter panel complete all as specified and as directed.
S & F of decorative wall light fixture made up of polycarbonate , suitable for and including 9 W 230 Volts retrofit LED lamp B22 base complete all as specified and as directed.
S & F in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one singlr pole MCB of 20 amps 10 KA complete all as specified and as directed.
Supply and fixing in replacement of bell push 6 amps one way 230 volts AC complete all as specified and as directed.
Supply and fixing in replacement of bell ding dong AC 230 volts complete all as specified and as directed.
Supply and fix exhaust fan, steel body single phase 230V of size 300 mm sweep with blades, frame and louvers all as specified and directed.
Supply and fixing in replacement pvc connection of size 600 mm length 25 mm dia all as specified and as directed.
Jaspal Construction Co.
Chander Mohan Arora Contractor
M/s Vijay Construction Co.
Santokh Singh and Associates
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .