Maintainance and Repair Works of Middle school irumbuliyur in zone 4

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Drilling of 150mm dia Vertical bore in hard rock area by using DTH RIG including labour charges for inserting casing pipe assembly in the drilled hole including the transporting charges for the rig and supporting vehicle etc. complete.

Supply and delivery of 200mm dia PVC Plain casing Pipe with ISI make including cost and conveyance of all materials and all other labour charges etc. complete as per SS. Note:- Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell.(With slots and with out slots)

Supply and delivery of 150mm dia PVC Plain casing Pipe with ISI make including cost and conveyance of all materials and all other labour charges etc. complete as per SS. Note:- Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell.(With slots and with out slots)

Supply and delivery of 1.5 HP Submersible pump set as per IS 8034/2002 With out panel Board 20x lpm x 125m including cost and conveyance of materials to work site etc complete.

Supply and delivery of 2HP single phase panel board with two level guard and auto start including cost and conveyance of materials to work site etc complete.

Supply and delivery of following PVC,HDPE,Gi pipes and specials etc completed

32mm dia HDPE pipes for sub-mersible pump in bore well class -5

8" dia bore cover

32mm dia Bore clamp

32mm dia GI Elbow

32mm dia Hex Nipple

32mm dia Hose collar

32mm dia GM NRV

32mm dia PVC Elbow

32mm dia PVC Pipe

32mm Dia GI pipe

Nylon Rope

32mm dia GI Flange Set

Supply and delivery of jointing of pvc insulated and sheathed 2.5 sq.mm 3 core flat type copper cable conforming to IS 694/1990 etc complete as per standard Specification

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD-65

Wiring with 2x1.5 Sq.mm(22/0.3)PVC insulated unsheathed Sc Cu .conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.t switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point SD 18

Labour Charges for the erection of submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to the required depth and also fixing of riser pipes to required depth values execution clamps etc. as per I.E. rules etc. complete and testing the pump set and trail run for 10 days

Supply Delivery of HDPE Tank as per IS 12701/1996 of size 2000 litres capacity bearing with ISI mark providing 3 Nos. of 20mm Tap Connection with check nut, washer nipple arrangement and 1 No. of 25mm of scour and 32mm for over flow arrangement etc. complete.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebate for housing the shutter and should have provision to fix AL drops, tower bolt hinges and lock plates inclusive of cost of all materials etc. complete complying with thew standard specifications.

Supplying and fixing in position best approved of BIS quality PVC Waste water pipes having a pressure of 6 kg. / sq.cm including cost of special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complete complying with standard specification.

90mm dia pipe

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supply and run off 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (derived from SD 55)

Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54)

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23

24 W LED Tubelight for T8 Fitting Single side (15- e)

Supply and Fixing of Dustless green board 6ft x 9ft including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Providing steel entrance name board 20 feet x 3 feet size board stand pipes from gl to 15 feet hight aluminium composit pannel leteer board and fixing in metal letters 12inches hight including cost and conveyance of all materials fabrication charges and all labour charges and foundation arrngements ec complete

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

AC Exhaust Fan 300mm (12”) Sweep (Heavy Duty)