SPECIAL REPAIR OF BATHROOM AND WATERPROOFING OF EXAM HALL, CONSTRUCTION OF LOW SECURITY WALL SURMOUNTED WITH BARBED WIRE FENCING AND PROVISION OF 70 GEYSERS AND 60 DESERT COOLERS UNDER GE NORTH PATIALA

Amount

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.

Demolition of mud phuska on roof any thickness incl plastering and leeping complete all as specified and directed.

M&L wire brushing, cleaning top surface ,Scarping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as specified and directed.

M&L PCC 1:3:6, type B-0 using 20mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed.

M&L for Rendering 20mm thick on top of roof in CM 1:4 incl mixed with WPC complete all as specified and directed. (WPC proofing compound shall be paid separetely )

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

Cutting groove in brick wall ,75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in roof kerbs, benches and water troughs, etc. including necessary moulding, coping on top and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified & directed.

M&L two coat of aluminium heat resistant paint on Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth, complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius, stragiht or curved on plan exceeding 6.0 mtr mean radius built in cement mortar 1:4 complete all as specified and as directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work etc complete all as specified and directed.

M&L for RCC 1:2:4 using 12.5 graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work of rough finished flat surfaces to soffits of suspended slabs such as roof slabs not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.

Form work of rough finished flat surfaces to edges of concrete slabs exc 5 cm but not exc 10 cm thick complete all as specified and directed.

TMT Bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.

TMT deformed steel bars, 6mm dia and over upto and including 8mm dia as in stirrups, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cementcomplete all as specified and directed. Note : WPC will be measured and paid separately.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick other than fair faces of brick work surfaces in cment mortar 1:4, on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of new plaster surfaces and applying two coat of cement base paint over priming coat incl a coat of wall care putty complete all as specified ands directed.

Preparation of new plastered surfaces and applying two coats of oil emulsion incl a coat of wall care putty as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of old plastered surfaces and applying 02 coats of cement base paint of any approved shade, by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer, over two coat of acrylic wall care putty as complete all as specified and directed.

M&L, complete removal of existing treatment and applying two coats of oil bound distemper on wall over a coat primer a incl preparation and a coat of wall care putty of surface complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Solid PVC Double door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

S&F 125 mm long butt hinges, medium weight, cold rolled, stainless steel and fixed complete all as specified amd directed.

S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified amd directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified amd directed.

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified amd directed.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified amd directed.

S & F Vitreous china wash hand basin white flat back size 550 x 400 mm including PVC waste pipe 32 mm bore and CP Waste coupling, CP bottle trap 32 mm with and incl a pair of suitable mild steel brackets, complete all as specified amd directed.

S&F Vitreous china premium/1st quality urinal full stall type white colour, of size 465x355x265mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified amd directed.

S&F CP waste couplings 32mm size half thread with 80mm height complete fixed in position complete all as specified amd directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified and directed.

S&F CP brass jet spray with 1.5M PVC flexible tube complete in all respect all as specified and directed.

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., with flush pipe and including S&F 'P' or 'S' CI Trap and taking down existing of any description/size complete in all respect all as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified and directed.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified and directed.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified and directed.

S&F Mixer , pressmatic/self closing type. fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified and directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified and directed.

S&F towel ring round with round flange and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and directed.

S&F soap dish brass glossy finish and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified and directed.

S&F PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish complete fixed in position all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified and directed.

S&F in repair ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia PVC float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank and taking down old tank, complete all as specified and directed.

S&F Stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore pipe all as specified fixed in repair complete all as specified and directed.

S&F Stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 20mm bore pipe all as specified fixed in repair complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified and directed.

S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified and directed.

Dismantling CI/PVC pipe alongwith fittings of 75/100mm dia,below or above GL, laid in floors or fixed to walls jointed in cement mortar and taking out complete all as specified and directed.

S&F 150 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors as specified and directed

S&F PVC (SWR) bend any radius 150 mm bore as specified and directed

S&F 100 mm cast iron soil waste and vent pipe in any length with or without ears laid in floor incl dismantling of old pipe and excavation of trenches, refilling and leveling of surface complete all as specified and directed.

M&L cast iron multifloor/floor/nahani trap 100 mm dia and 450 to 600 mm long including jointing with solvent cement in repair complete all as specified and directed.

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed.

S&F CI Bends (any radius) with access doors, for 100mm bore CI piipes complete all as specified and directed.

M&L for cast iron cowls of 100 mm dia complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe, 75mm bore, spun pipes in any length, with or without ears, with cement joints,laid in trenches / floors. and making necessary connections, fixed as in repair complete all as specified and directed.

S&F CI Bends (any radius) with access doors, for 75mm bore CI piipes complete all as specified and directed.

S&F CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as directed and specified.

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints, filled with polyurethane elastic adhesive/sealant (white/grey colour-sikaflex) of approx density 1.30kg/litre and form work complete all as directed by Engr-in-Charge and complete as specified.

Excavation in trenches in soft/ loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 meter in depth and not exceeding 10 sqm on plan and getting out complete all as specified and directed.

Excavating over areas in soft / loose soil, n exc 1.5 m deep and getting out complete all as specified and directed.

M & L for Plain cement concrete 1:3:6 , type C-2 (using 40mm graded crushed stone agg) as in sub base of foundation filling and mass concrete complete all as specified and as directed.

M & L for Reinforced cement cocnrete M-25 (design Mix) using 20mm graded crushed stone aggregates as in foundation, including raft footing, foundation beams, plinth beams, bases for columns etc and mass concrete complete all as specified and as directed

M & L for Reinforced cement cocnrete M-25 (design Mix) using 20mm graded crushed stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for Providing cement cocnrete 1:2:4 using 20mm graded crushed stone aggregates as in RCC bands, lintels upto 1.5m span, complete all as specified and directed.

M & L for Reinforced cement cocnrete M-25 (design Mix) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, over-hangs, etc. also splays between floors and beams, etc, flat, rough finished surfaces of concrete, complete all as specified and as directed.

Broken glass coping on top of walls @ 10 kg/sqm in cement mortar 1:3 complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as specified and directed.

Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and string and fixing to mild steel fencing posts any type of standard rails, straining bolts including securing or tying at cross wings with and provision of galvanized mild steel wire staples or steel wire pins complete all as specified

M&L Framed work such as grills, gratings etc, with ends of bars shouldered and /or riveted, or forget into spikes;framed gates; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0

M&L Framed work for ornamental and intricate design, such as grills, gratings etc, with ends of bars shouldered and /or riveted, or forget into spikes;framed gates; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 410-0 or Fe-310-0

M&L 3mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Preparation of new surface of steel and applying two coats of synthetic enamal paint over a coat of red oxide on surfaces of any description, over 10 cm in width or girth, not otherwise described untreated surfaces complete all as specified and as directed.

All as per item no 94 here-in-above, but n exc 10cm in width or girth, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick each, excavated soil in trenches complete as in soft/loose soil, complete all as specified

Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

M&L 20mm th. Black Granite stone tile, machine cut to sides of col laid over screed 10mm (1:4) and jointed with grey cement slurry and pointed with white cement to match the shade of granite incld grinding & polishing

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for One light/fan point controlled by one switch 6 amp one way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment required for fitting of flush and junction boxes complete all as specified and directed. (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring) NOTE:- 1.The contractor must produce certificate of FRLSH wire as well as on site testing of FRLSH wire. 2.Make of The modular cover plate must be same make of switch/socket.

All as described above in item no 100 but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board complete all as specified and directed.

All as per Sl item No 100 above herein before but one 5Amp socket point on same board but with other switches complete all as specified and directed.

All as per Sl item No 100 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed.

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed.

M&L modular switch 16 Amps, 1 module with indicator complete all as specified and directed.

M&L modular socket 16 Amps, 6 pin, 2 module complete all as specified and directed.

S/fix ceiling rose 65x17mm three terminals complete all as specified and directed.

Supply and fix in replacement of old unsv building light ,25 W IP 66 LED security light for building luminaire comprising of die cast aluminium housing with weather proof gasket for lamp & driver compartment with system wattage of 25 W . The LED make must be of minimum 100 lumen/watt CCT 6500K .The driver must be power factor > 0.95 with short circuit protection , open circuit protection , reverse polarity protection , high voltage protection. the luminaire must have secondary optics with perfectly matched lens for better light control with GI bracket of suitable size and clamps with fixing accessories connection with PVC insulated three core flexible copper conductor cable 0.75X3 Sqmm with proper clamps .complete all as specified and directed by Engr in charge.

S&F incl taking down 20 watt wall mounted, new generation LED batten fitting 4 feet with polycarbonate diffuser andextruded thermoplastic body > 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90 . including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in Charge.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specefied and directed. (Note: MCB should be B or C curve as directed by engineer in charge)

S&F MCB SPN 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specefied and directed. (DB will be measured and paid separately under respective items of sch A):-

S&F MCB SP 6 to 32 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specefied and directed. (DB will be measured and paid separately under respective items of sch A):-

Supply and fixing earth metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall all as directed by Enineer-in-chargr.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor FRLSH wire drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note1: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.Note2 : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

S&F Alluminium conductor service cable 2 core 6 sqmm with PVC insulated.fixed with clamps complete all as specified and directed.

supply and fixing exhaust fan 300 mm metalic body with LOUVER iron shutter of suitable size,single phase ac 220Vcompelete all as specified and as directed.

Supply and fix Electric Water heater (Geyser) storage type of capacity 25 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum & high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality copper connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and dirceted by Engineer-in-Charge.

S & laying GI tubing 'medium grade' 15 mm bore with all necessary fittings like elbow, reducer, T-joint, nipple and passing through brick walls, ceilling or laying in floors, tapping from existing lines and necessary cutting, chasing of walls etc complete all as specefied and directed.

Supply and fix Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 15 mm Chromium plated fancy type complete all as specified and directed.

Supply and fix Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe complete all as specified and directed by Engr-in-charge.

M & L for Sub main wiring with two single core 2.5 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 1.5 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2(two) Runs of 2.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 1.50 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc. 10 cm girth .

Supply and fixed SPN earth metal plug 240 volts with 20 amp SP MCB with a two pin and earth plug and socket for geysers complete all as specified and directed.

Supply and installation of Desert cooler with outer body made of PGI (plain Galvanised Iron) sheet not less than 1.20 mm (18 gauge) thicness for fixed part, thickness of PGI sheet for shutter not less than 0.80 mm (21 gauge) thick front grill made of PGI Sheet with minimum weight 2.80 kgs overall outer size not less than 66cmx66cmx85 cm (height) electric driven copper wounded fan motor having nominal air flow capacity 4000 Cum per hour and capacity of water storage tank not less than 40 ltr and submersible pump for required flow of water single phase) complete all as specified.

Supply , fabricating and fixing angle iron frame made out of 40x40x5 mm thick suitable for fixing of Desert cooler including necessary civil work , making good the disturbed portion of wall includiing colour/whitewash as per existing surface complete all as specified and directed by Engr in Charge.

Buttar Construction Co.

DELTA CONSTRUCTION CO

KK BUILDERS