Electrical Work

Amount

250A sub-panel -Design, Supply, erection, testing and commissioning of 250A floor mounted cubical panel board bus bar chamber dust and vermin proof and accommodating the following d sine with Thermal Magnetic Release MCCB’s units with the following items of work complete to satisfy the latest IE rules and CEIG guidelines. Supply and fixing of suitable bus bar chamber made up of 16SWG MS sheet steel (1.6mm) with 4 Nos. of 1” X ¼ ” tinned copper bus bar for 3 phases and neutral (25mm x 6mm) and 2Nos. of earthing bus of size 1” X 1/8 tinned copper bus (25mm x 3mm) on suitable bus bar insulator (Epoxy insulator) with maximum creepage distance and supported on MS Base channel frame work of size 4”X 2”X ¼”–1Set Incoming 1)Supply and fixing of 1 No. 250A 4 pole 433V LT MCCB confirming to IS with Thermal Magnetic Release making capacity for easy maintenance as per CEIG, IE rules in force with inter connection and terminations as required in specification

Outgoing 1) S & F of 125A 3Pole MCCB—5Nos , 2) S & F of 100A 3PoleMCCB—3Nos, 3) S & F of 63A 3PoleMCCB—2Nos Inter connecting the all LT MCCB’s to bus bar with suitable insulated tinned copper flats and painting/PVC sleeve colour coding of phases and neutral indication. Double Earth connection of the MCCB’s to earth bus using suitable tinned copper flats by 2 runs of 1” X 1/8” Supply and fixing of LED lamp arrangements with toggle switches to the control to each phases and with rigid connection in suitable separate compartments with in the cubicle by CEIG rules. Supply and fixing of danger board with Siemens grey powder coating with super Scribing the names of places to which supply is fed feeder sizes of cables direction of cables etc. Erection of panel board complete with suitable foundation bolts and nuts including suitable M.S Channel, concreting, testing and commissioning (L&T, C&S, SIEMENS, ABB)

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board (with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 6 nos. 32A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing with cable end box on suitable angle iron frame on wall with earth connection only. Higher End (

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with acrylic Door Cover with IP42 Protection with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of SMC Syntex box enclosure with accommodate for the S&F of 1 no 4Way MCB Rail with Four pole 63A MCB complete fixing on the wall with earth connection. (R O Control and building all round street light control)

Supply and fixing of Double pole enclosure with accommodate for the S&F of 1 no 2Way MCB Rail with double pole 16A MCB complete fixing on the wall with earth connection. (Aviation control)

Supply and laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (Ground Floor power panel to 250A Sub panel incoming under staircase)

Supply and fixing of brass cable gland for 3 ½ x 70 sqmmPVC LTUG armoured cable with earth connection.

Supply and providing cable end termination of 3 ½ x70 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (250A Sub panel to sewage motor Outdoor pillar incoming Near Lawn)

Supply and fixing of brass cable gland for 3 ½ x 50 sqmm PVC LTUG armoured cable with earth connection.

Supply and providing cable end termination of 3 ½ x50 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (250A Sub panel to sewage motor Outdoor pillar incoming Near Lawn)

Supply and fixing of brass cable gland for 3 ½ x 120 sqmm PVC LTUG armoured cable with earth connection.

Supply and providing cable end termination of 3 ½ x 120 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Supply and fixing of 3 nos.6A two module 5 pin socket, 3 nos. 6A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End (Module switches and plates are crabtree / legrand / hager)

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End. (Module switches and plates are crabtree / legrand / hager)

Supply and fixing of 1 no.6A two module 5 pin socket, 1 no. 6A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End (Module switches and plates are crabtree / legrand / hager)

Renewal by supply and fixing of 20W, 4 feet LED fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (fitting and Bulbs are Philips / Crompton / Havells make)

Supply and fixing of 1 feet x1 feet Recessed / surface LED fitting (Cirrus Mini Pro Philips cat no.SM200C LED16S 6500 PSU OD WH) is a general lighting application luminaire a perfect solution for all surface mount/recess indoor general lighting application from the ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 4 feet x1 feet Twin recessed acrylic cover fitting (PureLine TechZone Philips cat no.RC820B LED 52S 4000 PSU W15L240 OD SI) with conduit pipe / chain suspension (5' x2 nos) from the ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 10W Round spot light fitting (like Philips) complete connection etc. @ Ground Floor Lobby

Supply and fixing of 18W Round recesses false ceiling spot light fitting (like Philips/Equ) complete connection etc.

Supply and fixing of 120W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 12W bollard light fitting with 12w LED Hight 600mm black or grey with suitable foundation of size 1’ x1’ square with 2 1/2 feet depth PCC Concrete foundation complete with foundation bolt & nuts with complete connection etc. (Like LUKER Make/or Equiv)

Supply and fixing of UniLED Flood light building focus fitting (Philips/Equ Make. Cat no.BVP122 LED200 CW FLNB FG PSU A1) with Special type MS Base Adjustable tilt angle for fixing in ground with civil work concreting foundation arrangement the LED fitting complete connection etc. @ building focus

Supply and laying of 4 core x 2.5sqmm PVC unarmoured copper cable in a trench to be excavated at a depth of 0.75 mtr putting laying of the HDPE Pipe through the in the above cable complete with refilling the earth to make good. @ Lawn lights

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion. (For power plugs)

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and fixing of 1 KVA UPS @ automatic Slide door

GST at 18%

Sathyanarayana Electricals (BID ID -1277848)