Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-AOC FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110075 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110075 | ₹1.2 Cr | L1 | Accepted-AOC Quoted rates lowest and competitive |
| 2 | L2₹1.3 Cr+₹5.7 L (4.63%)Rejected-Finance 15 HOSHIYAR SINGH PARK KIRBY PLACE DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | ₹1.3 Cr+₹5.7 L (4.63%) | L2 | Rejected-Finance Quoted rates neither lowest nor competitive |
| 3 | L3₹1.3 Cr+₹10.7 L (8.61%)Rejected-Finance | ₹1.3 Cr+₹10.7 L (8.61%) | L3 | Rejected-Finance Quoted rates neither lowest nor competitive |
| 4 | L4₹1.4 Cr+₹12.2 L (9.83%)Rejected-Finance | ₹1.4 Cr+₹12.2 L (9.83%) | L4 | Rejected-Finance Quoted rates neither lowest nor competitive |
| 5 | L5₹1.4 Cr+₹13.1 L (10.5%)Rejected-Finance WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | ₹1.4 Cr+₹13.1 L (10.5%) | L5 | Rejected-Finance Quoted rates neither lowest nor competitive |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
28 Dec 2020, 6:00 pmClosed
COL PRADEEP SHARMA, CWE DELHI CANTT
HQ CWE DELHI CANTT-10
PROVN OF 10 MULTI CAR PARKING SHED WITH 12 GARAGES EACH AT ARJAN VIHAR UNDER GE CENTRAL DELHI CANTT 10
2020_MES_391157_2
CWE/D-43/2020-21
Open Tender
Civil Works
Item Rate
180 days
Delhi Cantt
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE CENTRAL DELHI CANTT
₹2.2 L
Yes
2 Feb 2021
8 Dec 2020
29 Dec 2020
8 Dec 2020
28 Dec 2020
15 Dec 2020
Amount
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete or similar works complete all as specified.
M&L Reinforced cement concrete M 25 ( Design Mix) using 20mm graded crushed stone aggregate as in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed.
M&L Reinforced cement concrete M 25 ( Design Mix) using 20mm graded curshed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L Reinforced cement concrete M 25 ( Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, post and struts etc.; complete all as specified and directed.
S & F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Ditto all as per item No 06 but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.
M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to better complete for flat and rough finished surfaces of concrete, complete all as specified.
M&L form work to sides of pillars, posts, struts, piers, columns, and stanchians and similar work, complete for flat and rough finished surfaces of concrete, complete all as specified.
S&F Steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.
S & F MS Plates Fe 410-W (Gde E-250) quality -A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment for numbering of garages duly fixed with the member including red oxide primer complete all as specified and as directed
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165
S&F Mild steel screw bolts (machine made) 12mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 50mm long complete all as specified and directed
S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with self tapering screws as specified by Engineer in Charge.
S&F Pre painted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with self tapering screws as specified by Engineer in Charge.
Preparing new or previously untreated steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete.
Surface dressing averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
M & L Cement concrete type C-2 1:3:6 (40 mm graded crushed stone aggregate) as in sub base, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed.
M&L for sand cushioning for laying of interlocking floor finishing complete all as specified. Note : - Thickness of sand layer will be measure after punning.
S&F Machine pressed precast rubber moulded, PU coated, concrete interlocking colour paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and directed.
S&F Pre-cast cement concrete block masonary solid blocks, exc 10cm in width type B0 1:2:4 (12.5mm graded crushed stone aggregate) for kerb stone and setting in mortar 1:6 of any shape and size as approved by GE.
M&L for painting on road side kerbstone including preparation of new surface over 10 cm girth or width and applying two coat of synthetic enamel paint complete all as specified and directed.
M & L for providing, cement concrete type B1 (1:2:4 using 20 mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges
S & F ABS round body with two nos 100 mm dia high reflective reflectors delineator of height upto 1m high and dia of pipe upto 70 mm powder coated including fixing on road by necessary arrangement complete all as specified and as directed by Engr-in-charge (Make : Darkeye model No DA-74 or equivalent make as approved by GE)
M & L for Retro reflective tape of any colour, 2" wide with adhesive material for car parking area/ Traffic warning signsetc. Make: 3M India or equivalent complete all as specified and directed
M & L for writing letters or figures (Block. Roman, Italic or Indian) on steel surfaces n exc. 30 cm high and upto 10 cm wide including stops, commas, short lines, dashes, hyphens, brackets, etc. Letters etc., shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained. complete all as specified and as directed
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified.
M & L for rendering 15 mm thick in CM 1 : 4 on fair faces of brick work or concrete surfaces etc finished even and smooth without using extra cement all as specified and directed.
M&L cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in surface channels and drains etc all as specified and directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified.
M & L for providing, cement concrete type B1 (1:2:4 using 20 mm graded crushed stone aggregates) as in copings complete all as specified and directed
M&L Reinforced cement concrete type B1 (1:2:4) using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rought finished flat surface of concrete all as specified and directed.
Removing excavated material soil to a distance of exc 1.50 kms and exc 5.00 Km depositing where directed .
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft and loose soil all as specified.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces of column, beams and like surface finished even and smooth without using extra cement and applying two coats cement base paint over a primer on newly plastered concrete surfaces
Shivom Projects Private limited
AMIT BROTHERS
AMIT ASSOCIATES
imran construction company
mtechassociates
Adhunik Builders
Bhasin Construction Co
G and G Infratech Private Limited
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .