Construction Of Warehouse 1020 MT AND Processing Shed 112.79 SQM

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Godown1020 MT - 96.66 Factory Shed 112.79 Sq.M.- 21.60

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Godown1020 MT - 115.99 Factory Shed 112.79 Sq.M - 25.92

Providing and laying Cast in situ/Ready Mix cement concrete in 1:4:8 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade Godown1020 MT - 65.34 Factory Shed 112.79 Sq.M - 2.16

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Godown1020 MT - 37.53 Factory Shed 112.79 Sq.M - 6.48

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Godown1020 MT - 13.53 Factory Shed 112.79 Sq.M - 4.37

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade Godown1020 MT - 24.74 Factory Shed 112.79 Sq.M - 6.98

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade Godown1020 MT - 2.34 Factory Shed 112.79 Sq.M - 0.00

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Godown1020 MT - 4.658 Factory Shed 112.79 Sq.M - 0.259

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.. Godown1020 MT - 12.00 Factory Shed 112.79 Sq.M - 1.38 MT

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Godown1020 MT - 17.572 Factory Shed 112.79 Sqm.- 5.94

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Godown1020 MT - 3.295 Factory Shed 112.79 Sq.M - 1.485

Filling in plinth and floors with contrctors approved material /murum/stone/ dust in 15cm to 20 cm layers including watering, compacting etc. complete as directed. Godown1020 MT - 438.06 Factory Shed 112.79 Sq.M - 61.20

Providing soling using 80 mm size granite / quartzite /gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering Complete. Godown1020 MT - 82.14 Factory Shed 112.79 Sq.M -15.30

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. Godown1020 MT - 50.01 Factory Shed 112.79 Sq.M - 21.82

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Godown1020 MT - 443.56 Factory Shed 112.79 Sq.M - 177.84

Providing internal cement plaster 12mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. Godown1020 MT - 296.82 Factory Shed 112.79 Sq.M - 126.76

Providing and fixing steel Ventilator fully glazes partly top hung and partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain obscured glass panes of approved type and quality and fastening without teak wood boxing and architecture and oil painting two coats etc.complete. Godown1020 MT - 10.08 Factory Shed 112.79 Sq.M - 7.380

Providing & applying waterproof cement paint three coats on plastered or masonary surface of approved manufacturer and of approved colour including primer coat scafolding & preparing the surface watering for two days complete. (Bd.O.8/406) Godown1020 MT - 443.56 Factory Shed 112.79 Sq.M -177.84

Providing and applying washable oil bound distemper of approved colour & shed old surface in two coats including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) Godown1020 MT - 296.82 Factory Shed 112.79 Sq.M - 126.76

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams,hip and jack rafters, purlins connecting to truss members& the like, as per detailed design and drawing or as directed including cutting, fabricating, hoisting, errecting, fixing in position, making riveted /bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting complete [Spec.No. :Bd.C.3 Page No. 275 Godown1020 MT - 16.00 Factory Shed 112.79 Sq.M - 3.50

Providing and flxing colour coated zincalume ® AZ150( min 150 gms / sg. Mt Total on each side ) rolled sheets for roofing The feed material is manufactured out of nominate 0.45 mm base metal thickness (8mt) (0.5 mm TCT ) Hi strength steel iwht m/s 559 Mpa yield strength , metallic hot dip coated with Aluminum zinc alloy (55% aluminium 43.4% zink 1.6% sillicon) with COLOURBOND( R) steel quality super durable polyester paint coat (with inorganix plgment) The palnt shall have a total coatting thickness of nominal 35 um. Complsing of nominate 25 um exterolor coat on top surface profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribes with subtle square fluting in the five pan of nominal 180-250 mm center to center. The end rib shall be designed for anticapillary groove. And returunleg . The feed material should havew coll manufactures product details marked a regular interval including fasteners with min. fastered with min 25 um zinc tim alooy coated max head self drilling screw etc completed (Weight of profile 4.52% sqm) ROOFING AND CEILING BASIC RATE AS PER S.S.R. I.NO. 38.34 & PAGE NO. 236 Godown1020 MT - 920.47 Factory Shed 112.79 Sq.M - 453.93

Providing and laying in situ cement concrete M20 with tremix treatment for 100mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bituman etc.complete Godown1020 MT - 547.57 Factory Shed 112.79 Sq.M - 102.00

Providing and fixing rolling steel shutters fabricated from 18/20 guage steel laths with side guides, bottom rail, brackets, door suspension shaft including rolling springs,locking arrangement and housing box at top including one coat of red lead primer. BASIC RATE AS PER S.S.R. I.NO. 39.29 & PAGE NO. 249 Godown1020 MT - 15.75 Factory Shed 112.79 Sq.M -9.30

Providing fixing metacolour, eppoxy coating, to match G.I sheeting of 22BWG (1mm ) over the ridge ,hip or valleyfor meta colour corrugated eppoxy sheet roofign including fastening with galvanised iron screw and bolt and lead and bitumen washer etc. complete Godown1020 MT - 36.39 Factory Shed 112.79 Sq.M - 17.46

Providing & fixing Turbo Ventilator of 24 inches throat doameter of alluminium and of approved make including fixing on dome manufactured from same material used for roofing all necessary fittings etc Complete ( Prior approval of sample and brand by Engineer in charge is necessary before use ) As direced by Engineer - in - charge Godown1020 MT - 8.00 Factory Shed 112.79 Sq.M - 3.00

Providng & fixing M.S. Channel ISMC 150 X 75 milimeters thick with weight @ 16.80 kilogram / running meter with 20 mili meter diamete & 0.50 meter long bolts & nuts & 1.00 meter center to center M.S. angles for stand of fire bucket including chain fixing in wall applying three coats of oil paints etc complete Godown1020 MT -0.365 MT Factory Shed 112.79 Sq.M - 0.00

Providing and fixing lightening conductor system comprising of erecting Air Termiation Consisting of tubular coppered of 25 mm dia 1.2 mm thick with multiple point shead 1.2 mt. .long Godown1020 MT - 1.00 Factory Shed 112.79 Sq.M - 0.00

Providing and fixing in position M.S.Ladder of 45 cms width made out 50x50x6 mm two angles for RMT rails and M.S.angle stiffners at Three place as Directed with M.S.round bars id 20 mm dia for steps @ every 30 cm c/c including fixing . Godown1020 MT - 10.00 RMT Factory Shed 112.79 Sq.M - 0.00

Providing Pre Constructional Anti-termite treatment as per I.S.6313 ( Part -1 ) - 1973 by treating the top surface of plinth filling at rate of 5 lit of emulsion concentrates of 0.5 percent of Hepoclore per square metre of surface. Godown1020 MT - 571.32 Factory Shed 112.79 Sq.M - 0.00

11 Providing & Laying 23 cms Wide Single Layer Initial Coat Of Shailbond @ 1 kg / sqm in place by wire nails for D.P.C. at plinth as directed by Engineer in charge. Godown1020 MT -19.992 Factory Shed 112.79 Sq.M - 0.00

Bituminus Road - Excavation For Roadway In Earth, Soil Of All Sorts,Sand, Gravel Or Soft Murum Including Dressing Section To The Required Grade, Camber And Side Slopes And Conveying The Excavated Materials With All Lifts Upto A Lead Of 50m. And Spreading For Embankment Or Stacking As Directed.

Providing Earth Work In Embankment With Approved Materials Obtained From Other Sources Upto Lead Of 50m. Including All Lifts, Laying In Layers Of 20cm. To 30cm. Thickness Breaking Clods, Dressing To The Required Lines, Curves, Grades & Section, Watering And Compaction With Vibratory Roller With V-Sat Attachment To Achieve Not Less Than 97 % Of Standard Proctor Density Etc. Complete ( Material Obtained From Other Source

Supplying hard murum/ kankar at the road site,including conveying and stacking complete.

Spreading Hard Murum/ Soft Murrum/Gravel Or Kankar For Side Width Complete .

Compacting The Hard Murum Side Widths Including Laying In Layers On Each Side With Vibratory Roller Including Artificial Watering Etc.

Providing,laying,spreading and compacting stone aggregate of specific sizes to water bound mecadam specification including spreading in uniform thickness ,hand packing to proper grade and camber , applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate ,watering and compacting with vibratory roller to the required density By Mechanical Means – Grading 1 ( Using Screening Type B ( 11.2 mm ) Aggregate).ITEM NO.3.19

Providing,laying,spreading and compacting stone aggregate of specific sizes to water bound mecadam specification including spreading in uniform thickness ,hand packing to proper grade and camber , applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate ,watering and compacting with vibratory roller to the required density By Mechanical Means – Grading II ( Using Screening Type B ( 11.2 mm ) Aggregate).ITEM NO.3.20

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.(VG-30 bulk bitumen rates are considered to arrive at rates) ITEM NO.3.03 .

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kilogram/Square Metre, spreading 12 mm.size chips compacting with three wheel statie rollerQty Same vide Item No.8

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) ITEM NO.4.12 Qty same vide Item No. 8

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) ITEM NO.4.01Qty same vide Item No. 8

Royalty - SAND ( Godown + Shed )

Royalty - METAL & MURUM (Godown +Shed+Road )

Testing Charges - CEMENT-- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

M20 CONCRETE -Concrete Mix Design (With all Tests on basic materials)

M20 CONCRETE - Compressive Strength OF C.C. Cube (Set of 3

M10 CONCRETE - Compressive Strength OF C.C. Cube (Set of 3 cubes).

TMT STEEL -(Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

SAND - Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

MURUM -Liquid limit & plastic Limit.

METAL Gr I & Gr II Agrregates - AIV Test, Gradation,Water Absorpation Test,Crushing Value

Bitumen Penetration, Softening Point, Flash & Fire Point, Specific Gravity, Viscosity.

Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

Electrification - Supplying and ereating armoured cables 3 core 6sq.mm in trenchwall.

supplying and ereating armoured cables 3 core 10 sq.mm in trenchwall.

making the trench in soil

making the trench in murrum and had rock

Supplying and laying 75mm dia G.I pipe (B)GRADE

Supplying and laying 25mm dia G.I pipe (A)GRADE

Supplying, erecting heavy duty flange cable glanded2 to 4 core 2.50sq.mm/2 to 4 core 4 sq.mm

p point wiring for street light 3 core 1.5 sq.mm

Supplying & erecting water proof powder coated distrubution board 4 way 2x6 Amp. S P MCB

S&E with mains PVC unarmourde cable 3 core 2.5 sq.mm

Supplying and eracting and markiting MCB of doubled pole0 16 amp.

suppliying shockproof type hand lamp

supplying and ereating LED street light fitting suitable for 20to 25 w, including street light

supplying and ereating GI earth plate

S&E sheet metal one way enclouse for mcb

point wiring for light bells with 2- 1.5 sqmm PVC insulatted wire

point wiring for independent plug with 2-1.5 sqmm. PVC insulleted wire

point wiring with 2-1.5 sqmm. PVC insulleted wire

S&F CFL lamp 11W

supplying and ereating marine plywood 19mm

P & F MS boxes of 16 swg

supplying and ereating redy to use retrofit 18 LED 18-20 TUBELIGHT with poly caarbonate body, hat sink, integrated hf electronic driver complete and competiable to T8/T12 LED

S & E ceiling fan 48" with step diamer

supplying and ereating four pole insulater only swith versin of MCB of 40 amp

S & E 40mm dia GI pipe 2.5M length of earth plate

P & F cover made of wire mesh jali

S & E ding dong type call beel

S & E 4"x4" epoxy coated 3 way jinction box

S & E steel tabular swaged pole 139.7x114.3x88.9 mm dia.

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social,Health and Safety (ESHS) risks and SHS Code of Conduct

SHRI SATIJI INFRATECH AND MEDIA PVT. LTD. (BID ID -6118088)

YASH ANIL MANDOWARA (BID ID -6119824)