CERTAIN B/R REPAIRS, DAY TO DAY COMPLAINTS AND CIVIL MAINT WORKS TO VARIOUS OTM BLDGS AT ICGAS CHENNAI AND CERTAIN OTHER AREAS UNDER AGE B/R (CG) CHENNAI

Amount

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc.,and making good the disturbed surfaces of wall to match with existing adjoining surfaces complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm and not exc. 4.0 Sqm each along with fittings including separating guard bars/grills/ wire mesh etc.,and making good the disturbed surfaces of wall to match with existing adjoining surfaces complete all as specified and as directed.

Taking down Shutters of any description not exceeding 1.00 Sqm each and refixing in same opening after cutting, easing and adjusting and refixing builders hardware as required including renewal of unserviceable builders hardware article and screws etc., complete all as specified and as directed.

Taking down Shutters of any description exc. 2.00 Sqm each and refixing in same opening after cutting, easing and adjusting and refixing builders hardware as required including renewal of unserviceable builders hardware article and screws etc., etc., complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and not exc. 2.00 Sqm each complete all as specifiedand as directed.

Supply and Fix 2nd class hard wood plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint etc., complete all as specified and as directed.

Supply and Fix 2nd class hardwood glazed and Skelton shutters, 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc., (without sash bars) edges of framing plain, chamfered, rounded twitted with mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers complete all as specified and as directed.

Supply and Fix 2nd class hard wood 35 mm thick factory made plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density,wood particle board with commrercial face veneers fitted to chowkats with rail and stile as per IS-1003(part-1) klin seasoned and chemically pressure treated complete all as specified and as directed.

Material and labour for PCC 1:3:6, type C-1 using 20mm graded stone for embedding hold fasts etc., including necessary form work complete all as specified and directed .

Supply and Fix in 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles not exc. 200 cu. cm each complete all as specified and as directed.

Supply and Fix EPDM Rubber beading around glass in aluminium windows /ventilator shutters all as specified and as directed.

Supply and Fix aluminium alloy wire cloth, 0.45mm nominal dia. of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply and Fix 250 mm long Aluminum alloy anodised, sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy all complete as specified and as directed.

Supply and Fix Aluminium anodised, ISI marked barrel tower bolts 100mm of extruded section and fixed complete all as specified and directed.

Supply and Fix Aluminium anodised, ISI marked barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

Supply and Fix extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and directed.

Supply and Fix extruded aluminium alloy handles fabricated types, anodised, each 125mm long complete all as specified and directed.

Supply and Fix 75 mm aluminium anodized butt hinges, extruded aluminium alloy, type C-21 with galvanised mild steel hinge pin, anodised and fixed all as specified and as directed.

Supply and Fix 100mm aluminium anodized butt hinges, extruded aluminium alloy, type C-21 with galvanised mild steel hinge pin, anodised and fixed all as specified and as directed.

Supply and Fix 150mm aluminium anodized butt hinges, extruded aluminium alloy, type C-21 with galvanised mild steel hinge pin, anodised and fixed all as specified and as directed.

Supply and Fix Floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

Supply and Fix Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and Fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.

Supply and Fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia. of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply and Fix 300mm Mild Steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

Supply and Fix in repairs Aluminium anodised,ISI marked barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.

Supply and Fix in repairs Aluminium anodised,ISI marked barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed.

Supply and Fix in repairs extruded aluminium alloy handles fabricated types, anodised, each 100mm long complete all as specified and directed.

Supply and Fix in repairs extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and directed.

Supply and Fix in repairs aluminium (extruded section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and fix as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed.

Supply and fix as in repairs Butt hinges, 75mm length extruded aluminium anodised alloy with galvanised mild steel hinge pin, anodised and fixed type C-22, complete all as specified and directed.

Supply and Fix in repairs Floor door stopper, 140mm overall length of cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints and removal of debris to out side MD land complete all as specified and as directed.

Material and labour for rendering in Cement Mortar 20mm thick in two coats, i.e, in Cement Mortar 1:4, outer 10mm thick mixed with water proofing compound as per manufacturers' instructions finished even and fair externally complete all as specified and as directed. Note: WPC will be measured and paid separately.

Material and labour for Rendering 15 mm thick on any faces of brick wall or stone masnory in Cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed.

Supply only water proofing compound of approved quality complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour Preparing new surfaces of steel of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix Galvanised steel water tubing medium grade 15mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., including taking down or up existing corroded GI tubing complete all as specified and as directed.

Supply and fix Galvanised steel water tubing medium grade 20mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., including taking down or up existing corroded GI tubing complete all as specified and as directed.

Supply and fix Galvanised steel water tubing medium grade 25mm bore conforming to IS specifications and ISI marked with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc fixed on walls/ceiling or laid in floors etc., including taking down or up existing corroded GI tubing complete all as specified and as directed.

Material and labour for attending and repair the PPR pipe leakage by shutt of the main water supply, identify the exact point of leakage, clean the leaking area thoroughly to remove any dirt, oxidation, old adhesive from the pipe surface and apply a special solvent cement designed for polypropylene (PP-R pipes), place the patch over the leak area by using PPR pipe repair kits/ heating machine as per the manufacturer's instructions and conduct a pressure test complete all as specified and as directed. Note : PPR Pipe required to be replaced shall be measured and paid under respective items.

Supply and Fix in repairs 15mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 & SDR 11 UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed.

Supply and Fix in repairs 20mm dia three layer PP-R polypropyline random copolymer concealed pipes SDR 7.4 & SDR 11 UV stablised and antimicroblal fusion welded having thermal stablility of hot and cold water supply incl all PP-R plain and brass threaded polypopylene random fittings fixed complete to wall or in ceiling or in floors etc all as specified and as directed.

Supply and Fix in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and as directed.

Supply and fix in repair stop valves 20mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and as directed.

Supply and Fix Gun metal globe or gate valve of size 20mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc., including taking down the existing gate valve complete all as specified and as directed.

Supply and fix in repair 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

Supply and Fix in repair 15mm bore Bib tap of cast copper alloy, fancy type, Chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs two way bib cock, brass Chromium plated suitable for hot & cold water all as per Cat No.ARI 39041 of Jaquar or G4834A1 of Parryware or Astro-6312N of Prayag or techno-commercially equivalent of other specified makes complete all as specified and as directed.

Supply and Fix PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed.

Supply and Fix in repairs Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, 40mm bore and fixed complete all as specified and as directed.

Supply and Fix Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, 32mm bore as fixed complete all as specified and as directed.

Supply and Fix Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as per specification & drawing shown in MES schedule part II complete all as specified and as directed.

Supply and Fix Factory made PVC Solid panel door shutters 30mm thick (style) solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supply and fixing in the frame at site as per specification and drawings shown in MES schedule part II complete all as specified and as directed.

Supply and Fix Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks,1000 litres capacity, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed.

Supply and Fix Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks,500 litres capacity, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement, making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including dismantling and lowering of old tank complete all as specified and as directed.

Supply and Fix in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and as directed.

Supply and Fix in repair, 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified and as directed.

Supply and Fix in repairs Aluminium powder coated curtain rods of 25mm diameter with wall thickness not less than 1.5mm for windows, doors opening etc. complete all as specified and as directed.

Supply and Fix in repairs fancy type aluminium powder coated knobs/brackets for fixing curtain rod of 25mm diameter complete all as specified and as directed.

Supply and Fix 125mm dia PTMT grating fixed over trap with cement as in repair complete all as specified and as directed.

Supply and Fix 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified and as directed.

Supply and Fix in repairs Vitreous china white squatting pan 'Orissa' pattern of size 580mm x 440 mm or next higher size with integral foot rests provided over lime concrete bedding including 110 mm bore PVC (SWR) ‘P’ or ‘S’ trap of suitable size for connecting WC to branch piece with cement joints and making good disturbed surfaces of flooring etc., complete all as specified and as directed.

Supply and fix in repairs Vitreous china wash down water closet pan, pedestal pattern, floor mounted, colour white with all fittings including fixing bolts, flush pipe, Plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device (excluding flushing cistern) and P/S trap including connections to drain (or outgoing pipe) and taking down existing water closet etc., complete all as specified and as directed.

Supply and Fix in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube 8mm dia (PVC chromium plated) and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.

Supply and fix in repairs PVC low level flushing cistern, white, 10 litre capacity, syphonic action type, white body with inlet, ball valve, float, handle, bracket, 32mm bore steel chromium plated flush pipe etc and connecting to WC and water pipe lines etc., complete all as specified and as directed.

Supply and fix in repairs Stainless steel kitchen sink of over all size 914mm x 460mm or next higher size with draining board and bowl size 410mm x 330mm x 160mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 32/40mm bore LDPE waste pipe, fixed over CI cantilever brackets or bedding in cement mortar to dwarf wall as required and connecting union to pipe etc., compete all as specified and as directed.

Supply and fix in repair Brass chromium plated shower rose of size 125mm with or without swivel joints fixing to 15mm dia steel pipe or union complete all as specified and as directed.

Supply and fix plastic water closet (EWC) seat cover, black or white closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device of same make of EWC, fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and Fix 4 mm thick plain sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet figured sheet glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and Fix 110mm bore UPVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

Supply and Fix 110mm bore UPVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and Fix 110mm bore, UPVC (SWR) bends any radius complete all as specified and as directed.

Supply and Fix 110mm bore, UPVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and as directed.

Supply and Fix 75mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and Fix 75mm bore UPVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

Supply and Fix 75mm bore, UPVC (SWR) bends any radius complete all as specified and as directed.

Supply and fix in repairs brass chromium plated central hole Basin mixer with round spout without popup waste system with 450mm long braided hoses fixed to 15mm bore pipe complete all as specified and as directed.

Supply and fix in repairs Wall mixer valve shall be 3-in-1 System 15mm bore, cast copper alloy, Chromium plated with provision for both Hand Shower and Overhead Shower Complete with 115mm long bend pipe on upper side for shower connection, connecting legs and wall flange all as per Cat No. FLR-5215N of Jaquar or F390020 of Hindware or G272EA1 of Parryware or 8770 of Prayag or techno-commercially equivalent of other specified makes fixed to 15mm bore pipe complete all as specified and as directed.

Material and labour for Running welding in repairs, not exc 2.5cm in length to steel windows,almirah, handles, door springs to iron frame of doors steel structure and other misc iron repair works by welding with thickness of metal to be welded not exc. 6 mmthick complete all as specified and as directed.

M & L for Material and labour for Removing of snap ling growth small plants including roots by dismantling of brick work / PCC / RCC using necessary scaffolding of any type for any location and any height in all Buildings including (G+5) ( i.e roof, parapet walls near pipes etc.) and applying Acid after removing roots for preventing the regrowthing and making good the disturbed portion using PCC 1:2:4 Type B0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 150mm) complete all as specified and as directed.

Material and Labour for attending and Repair the complaints of plumbing and sanitary fittings including water leakage from taps, WCs, flushing systern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms / quarters, involving plumbing work including supply and replacement of minor stores such as replacement of Brass spindle, M seal, Screws, nailing, washers, check nuts, tightening of fittings of flushing cistern, cleaning of bolttle traps etc., to make it functional and stop leaking of any type of plumbing and sanitry items as in day to day maintainence work complete all as specified and as directed. Note: Any item required to be replaced shall be measured and paid under relevent items mentioned in BOQ.

Material and Labour for attending minor complaints of joinery such as wooden/ steel/ aluminium of any description including pelmet box, cupboards, door springs, rolling shutters etc. requiring carpentry work like adjusting and easing, cutting, pinning, welding and finally good etc. and functioning to seating over with each other with tightening of screws/ nails, doors, helical door springs, door closers etc. including provision of petty repair materials like screws, nails, plugs, grease etc. to make it functional as in day to day maintenance work complete all as specified and as directed. Note: Any item required to be replaced shall be measured and paid under relevent items mentioned in BOQ.

Material and labour for preparation of old surface of walls and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old surface of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of old surface of walls and applying one coat of distemper oil emulsion Including filling crack, holes with putty complete all as specifed and as directed.

Material and labour for complete removal opf existing treatment and Applying wall 1.5mm putty and rubbing with sand paper to achieve a level and smooth to wall and ceiling surfaces complete all as specified and as directed.

Material and labour for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

Material and labour for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

Removing building materials etc., (Other than items catered in schedule of credit) to a distance of 5Kms beyond the lead included in the rates including loading, unloading & stacking at the identified location out side MoD land complete all as specified and as directed. Note: 'Load' shall be one metric tonne or the standard load definition as per preamble on Sl.Page No.494 of MES SSR Part II 2020.

Material and labour for Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes etc exc 250 litre and not exc 500 litre and wirting date of cleaning with white paint on each tanks.complete all as specified and as directed.

Material and labour for Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes etc exc 500 litre and not exc 1000 litre and wirting date of cleaning with white paint on each tanks.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for Double charged vetrified ceramic tiles of grade B-I(a), 9-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of grade B-III, 8mm to 10mm thick of size 450mm x 350mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:6, 15mm thick complete all as specified and as directed.

MONISH CONSTRUCTIONS (BID ID -3502322)

G.JANAKIRAMAN CO (BID ID -3501300)

Sri Lakshmi and Company (BID ID -3506848)