Provn of 12 x Security lights in FAFA-II Accn, 01 x toilet near Bldg No P-44 of Armd Regt, toilet near bldg No P-1 and P-28 of Bde Camp, Boundary wall at Offrs Md Accn No. NP-23 to NP-30 at site-10 Jhoke road Unit under GE (East) Ferozepur Cantt

Amount

B/R Works Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise complete all as specified and directed

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

M & L Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, using WPC, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed

Preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over primer coat complete all as specified and directed

Preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and directed.

Demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed

M&L for use & waste wooden form work (rough finished surfaces ) to sides & soffits of Chajjas, parapets & facia and similar work n. exc 200 mm thick, complete all as specified and directed

M&L for RCC type B1, 1:2:4 (20 mm graded Stone agg) as in RCC platfrom complete all as specified and directed

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 10mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ccomplete all as specified and directed

S&F anodised aluminium powder coated frame for doors,windows,ventilators with one or more rebated incl joining cleat for fixing etc. complete all as specified and directed

S & F Anodiesed aluminium powder coated door shutters aluminimum section weighing 0.55 Kg/m incl necessary joining cleats glazing clips, rubber neoprene packing, handles 2 nos in each doors, hinges, anodiesed aluminium snap beading screw etc complete all as specified and directed.

S & F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (3 no.) suitable handle (1 no.) complete all as specified and directed. Note:- (i) Aluminium chowkhat /frame, glass,wiremess shall be measured and paid separately.

S&F 5mm thick PVC plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Linning, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent Cement and fixint at site complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality in Aluminium door with solar control film 50 micron in squares exc 0.5 sqm each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Brass mortice lock 100 mm,4 levers, vertical type, fixed to cupboard shutters, complete all as specified and directed.

S&F Hydraulic door closer of aluminium die cast body,designation No-3 universal type suitable for door shutter of 851 mm to 1000 mm weight between 61 Kg to 80 kg etc, complete all as specified and directed.

S&F Aluminium tower bolts powder coated , 150 mm long and fixed with steel screws, complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.

M & L PVC Wall Lining consisting of 5mm thick hollow Plain /wooden grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including cover fillets as per specifications and drawing complete all as specified and directed.

Dismantling floor ,hearth or wall tiling including cement morter bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vetrified Ceramic coloured dark shade tiles 9 to 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

All as per Item No-above here in before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed.

M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on old surface of wall incl complete removal of existing surface complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of cement base paint complete all as specified and directed.

M&L Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm complete all as specified and directed.

M&L for 4mm Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S&F decorative anodised aduminium alloy curtain rails of 20 mm dia brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as direced by Engr-in-Charge.

M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as directed by Engr-in-Charge.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and as directed.

S&F Hand rails,half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete i.e. PCC (1:3:6) and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wires, etc, flat iron fillets(for securing wire mesh etc.) including all necessary drilling,bolting or riveting etc.and similer work conforming to Fe-290 Gde E-165 (For Fencing) complete all as specified and as directed.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and as directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Brick work in cement mortar 1:4 using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed.

M & L Hardcore of broken bricks of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1,using 20mm graded stone aggregate, as in sub base of flooring,surface finish rough to receive floor topping complete all as specified and as directed.

M & L Damp proof course,40mm thick in cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate using WPC (powder) including necessary form work ccomplete all as specified and as directed.(WPC shall be measured separately).

Supply only integral water proofing compound (WPC),ISI marked complete all as specified and as directed.

M & L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in flooring etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with colour of tiles over and incl screed bedding 15mm thick in cm(1:6),complete all as specified and as directed.

M & L Glazed Ceramic coloured tiles 450 mm x 300 mm x 7 mm thick primium quality over and incl 10 mm thick rendering in CM 1:4 on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match colour of tiles complete all as specified and as directed.

M & L Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as specified and as directed.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work (Horizontal or sloping) complete all as specified and as directed.

M & L for formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers, lintels, cantilever, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete complete all as specified and as directed.

M&L Reinforced cement concrete (1:1.5:3) nominal mix A1(M20) grade using 20mm graded stone aggregate as in roof/floor slabs supported on walls, beams & columns landing, balconies, canopres,aech slabs and in shelves and the like complete all as specified and as directed.(form work and reinforcement measured separately).

M&L Reinforced cement concrete (1:1.5:3) nominal mix type A1(M20) grade using 20mm graded stone aggregate as in lintel up to 1.5 m span including necessary form work complete all as specified and as directed.(form work and reinforcement measured separately).

S&F mild steel TMT bars as in reinforcement 10mm dia and over cut to length,bent to shape required including cranking, bending spirally for columns, hooking ends and binding with and including mild steel eire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

All as per item No 54 here-in-before but as in stirrups, spacer and binder complete all as specified and as directed.

S&F solid PVC door frames of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as specification & drawing complete all as specified and as directed.

S&F Factor made solid PVC Door, Shutter 30 mm thick fabricated and supplied by authorized fabricated (Style) consisting of frame made out of MS tubes for top and bottoms rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channels having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side and as gap insert for Top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F aluminium anodised handles 125 mm long fixed to doors complete all as specified and as directed.

S&F aluminium anodised tower bolts 150 mm long fixed to windows complete all as specified and as directed.

S & F aluminium anodised butt hinges, 100 mm long, fixed with galvanised mild steel hinge pin complete all as specified and as directed.

M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and as directed.

All as per item No 61 here-in-before but 20 mm bore tubing complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S & F PVC (SWR) bend (any radius), 75 mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar complete all as specified and as directed.

S & F PVC (SWR) bend (any radius), 110mm bore, diminishing pieces or tapers (larger bore measured) jointed in cement mortar complete all as specified and as directed.

S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc, complete all as specified and as directed.

M & L cement concrete 1:3:6 type C2 with using 40 mm graded stone aggregate as in concrete bed to drain pipe 150 mm dia including packing under and haunching against the sides of pipe after they are laid and tested completed all as specified and directed

M & L 150 mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished and reforming branching as required for 150 mm dia pipes complete all as specified and as directed.

S & F Water storage tanks 500 liters capacity rotational moulded, triple layer polythene (cyindrical vertical with closed top) hoisting and fixed in position on roofs, complete all as specified and as directed.

S & F Ball valve of brass, 20mm bore, high pressure with ploythene float and fly nut complete screwed for iron pipe of brass ferrule and fixed ,complete all as specified and as directed.

S & F Bib tap of cast copper alloy fancy type, 15mm bore, with crutch or butter fly handle, screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F 15mm bore PVC connection with brass nuts on both ends, 450 mm long with PTMT nuts complete all as specified and as directed.

S & F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flus pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and as directed.

S & F Vitreous China wash down water closet pan (pedestral pattern), White (excluding fixing bolts, flushing cistern and flush pipe), with CP jet, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F Low level flushing cistern, PVC (White) 10 liters capacity with inlet ball float valve PVC flush pipe and necessary fixing accessories and connecting to water pipe and WC etc complete all as specified and as directed.

S & F Vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed.

S & F Vitreous china (White) flat back urinal of size 465x355x265mm with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe as in repair complete all as specified and as directed.

S & F Pillar tap,15mm bore, cast copper alloy,with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and as directed.

S & F Towel rail,20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs complete all as specified and as directed.

S & F Stop valves of cast copper alloy, 15mm bore, screwed down, high pressure with crutch or butter fly handle, with long shank and cup (concealed type) complete all as specified and as directed.

S & F Wire cloth galvanised mild steel, 0.48mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S & F Mild steel framed work of Fe-410-0 or Fe-310-0 (Fe-290 Gde-E-165) as in grills/guard bars shouldered with steel window/ventilator frames complete all as specified and as directed.

M&L for Cement base paint in two coats over a coat of cement wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed.

M & L Rendering/plastering, 5mm thick in cement mortar (1:3) on concrete surfaces, finished even and fair as in ceiling complete all as specified and as directed.

M & L for applying three coats of White wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregate as in manhole cover /Buffle wall electric pole/struts etc and set in cement mortor 1: 4 placing where directed including necessary formwork complete all as specified and as directed.

M&L for 75mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in plinth protections complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F 3 mm thick, Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

S&F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F 15 mm bore Bib tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed

S&F stop cock / angle cock standard 15 mm cast copper alloy cromium plate screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed

S&F brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed

M&L preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls. complete all as specified and directed

S&F Steel work in tabular trusse incl. special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 11614-1979 grade St-240 complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for Providing & fixing Gypsum Board 8mm thick in ceiling fixed with screw as per manufacturers instructions

S&F 150m dia SWG drain pipes laid in trenches and jointed complete all as specified and as directed.

M&L for concrete bed to drain pipes including paving under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore at pipe complete all as specified and as directed.

M&L for cement concrete type B-2, 1:2:4 using 40mm graded aggregate in surface channels and drains, coping complete all as specified and as directed.

Surface excavation n. exc 30cm depth and averaging 15cm deep getting out in soft/loose soil complete all as specified and as directed.

M&L for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M & L chequered cement concrete tiles with grey cement and pigment 300mm x 300mm x 25mm thick set, jointed and pointed in neat cement slurry over 15mm thick screed bed or bedding layer of mortor in CM (1:4) complete all as specified and directed.

E/M Works Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified and directed. for following : (a) One light/fan/bell/Bldg security light point controlled by one single pole one way switch.

All as per item No. 124 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board complete all as specified and directed.

All as per item No. 124 here-in-before but One 3 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and directed.

All as per item No. 124 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable complete all as specified and directed.

S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.

S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed.

S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 36 watt (>120 lm/W), 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing of Decorative, wall mounting light, Decorative wall light fixture made up of Polycarbonate including 9 W retrofit LED Lamp B22 base. complete all as specified and directed. Cat Part No LHDL06160099 of Havells or equivalent in any other make.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 12 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning complete all as specified and directed.

S&F Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4 sqmm drawn in 20 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as unit length).

Fixing or hanging only ceiling fans height upto 3mtr to 5 mtrs ceiling height of bldg including three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed. . Note : Ceiling fans obtained/ taking down from item Sr No.01 as above

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/ 66 protection complete all as specified and directed.

Supply & fixing in repair MCB PROTECTED SOCKET (MODULAR AC BOX) 3 Module IN SHEET STEEL / PLASTIC BOX (WITH SP MINI MCB of 'C' series 25 Amps) complete all as specified and directed by Engr-in-Charge.

Suplying and fixing in repair 1100 volts grade heavy duty 16 Sq mm two core cable PVC insulated aluminium Stranded conductor, served with inner shething of PVC sheathed in service conections suspended by insulating hangers and procelean beat not more than I metre apart including 4Sq mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified and directed.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 4 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, ccomplete all as specified and directed. (Excavation and earth work measured separately). Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified and directed.

M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X20mm dia including excavation, returning filling complete and all as directed and specified.

Supply and laying GI tubing medium grade galvanised of size 20mm bore laid on floor/ ceiling including all fittings and short pieces complete all as specified and directed. by Engineer-in-Charge.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore complete all as specified and directed.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified and directed.

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

Excavation in trenches exceeding 1.5m depth and not exc. 3.0m wide and getting out in soft/loose soil complete all as specified and as directed.

Supply and errecting prestressed concete poles 9.00 mtrs long of cross section 102mm X 152 mm at top and 102mm X 289mm at bottom class 10complying with requirements of IS-1678-1978 including paints of poles in strips upto 1.5 metre from PCC block with two coats of synthetic enamel paint complete all as specified and directed . Note:-Pole Number to be marked on each pole.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & fixing street light pole cable junction box IP-65 with box size of 200x160x98 with 4 Nos of terminal block, 1 Nos of earth terminal metnic knockouts for cable entry and the box made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps bolts, nuts duly painted and MCB SP 6 Amp etc. complete all as specified & directed.

Supply & fixing 3 core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from Junction Box to street light fittings including clamps for FR PVC wire as complete all as specified and directed.

S&F cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed.

Supply and fixing GI pipe light grade 40mm dia upto 1.5 Mtr from surface to junction box with all fittings for cable protection complete all as specified and directed.

Supply and fixing GI pipe bracket for street light fittings made out of 40 mm dia GI pipe medium grade 1.2 mtr long bent to required angle/shape with and 2xpair of MS clamps made out 40mmx5mm MS flat iron bolts,nuts complete including two coat of synthetic enamel paint (first grade) over a coat of red oxide complete all as specified and directed by Engr-in-charge

M&L Painting of LT PCC pole upto 1.5 mtr height from PCC, of synthetic enamel paint with black and white strips and including wiriting pole No complete all as specified and directed. by Engr-in-Charge.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6.3 mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 metre below normal ground level with top edge of the earth plate not less 1.5 metre (BGL) connected to galvanized iron earth strip 32 x6 mm by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 50mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 50 mm bore “light grade” galvanized iron protection pipe for earth strip 32 x6 mm upto 5m length, charcoal, common salt, complete all as shown in EP No 1 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion, complete all as specified and directed. Note : GI earth strip 32 x6 mm more than 7.5 m will be measured and paid separately.

supply, installation, testing and commissioning factory made, Street Light panel board cubical, Outdoor type, floor mounted double door, 3 phase 4 wire, 50 cycles, 415 Volts.The panel board shall be made of 3.15 thick CRCA sheet (Min size 0.6 m x 0.5 m x 0.35 m ) with Synthetic enemal Paint both side.Base frame of the panel shall be made of angle iron of size 50 x50 x 6mm of upto 1/2 mtr hight from GL& 1/2 mtr for Below GL in PCC (1:3:6) type C-2 using 40 mm stone aggregates comprising of following:- The panel board shall be suitable for AC, 415 Volts, 50 Hz, 3 phase, 4 wire supply complete with and comprising of the following:- (i) Epoxy insulated common aluminium bus bar of capacity 100 Amp TPN each with Color Coding , including aluminium lugs to connect the cable. (ii)MCCB 4 Pole, 415 V, Adjustable type, 32 Amps with breaking capacity 16 KA-01 No .

M/s Surjit Singh and bros

Manjeet Singh Contractor