Construction of Public Distribution shop at Kannusamy Street in Ward No 32 Central Zone.

Amount

Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m (CBE DATA 24-25 P-7 ITEM - 1)

Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying,consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification - 1 m3 (detailed data for 10 m3 ) (CBE DATA 24-25 P-22 ITEM - 3)

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges for cutting, bending & tying etc., complying with standard specifications - 1 Quinta (CBE DATA 24-25 P-38 ITEM - 2)

Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc.,complete - 1 m2 (CBE DATA 24-25 P-34 ITEM - 1)

(a) Plinth Beams and footings sides

(a)columnns

(b)beams and slabs

Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. (CBE DATA 24-25 P-29 ITEM - 3)

Filling with basement with PALLAM SAND in layers well rammed, watered and consolidated, complying with standard specification etc., complete.

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x23/4") including cost of materials and labour charges etc., as per standard specification - 1m3 (CBE DATA 24-25 P-53 ITEM - 2)

Supply and fixing of ROLLING SHUTTERS (WITH ISI MONOGRAM):Supply and erecting of Gear type rolling shutter with ISI make of approved size and section using 18 GI sheets. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,

Supplying and fixing in position of Indian make colour water closet of size in 580x440mm weight glassed earthan ware of approved with P Trap (or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position leveling complete with necessary connection as per standard specification

Ceiling Plastering with C.M. 1:3 Mix (one cement and three sand) 10mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification. (CBE DATA 24-25 P-114 ITEM - 5)

Plastering with C.M. 1:5 Mix (one cement and five sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.(CBE DATA 24-25 P-114 ITEM - 6)

Dadooing walls with Ceramic tiles of size 200mm x 200mm x 6mm first quality design tiles of all colours laid in cement mortar 1:2 mix, 10mm thick and pointing with white cement using 0.40 kg/1m2 including finishing the joint and pointing flush with tile surface etc., complete - 1 m2 (CBE DATA 24-25 P-60 ITEM - 7)

Flooring with ceramic tiles of approved Colour and quality of size 305mm x 305mm x 6mm laid first quality design of all colours in cement mortar 1:3 mix, 20mm thick and pointing with the same mortar etc., completely and finish very neatly (CBE DATA 24-25 P-61 ITEM - 9)

Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete (CBE DATA 24-25 P-68 ITEM - 7)

Manufacturing,supplying & fixing in position Steel windows of MS sheet 20 gauge thick with openable shutter frame and shutter frame made out of steel section confirming to IS7452/1990.The outer frames of windows made of Zsection (F7D) of size 25x20x3mm confirming to IS7452/1992 mullions are made of (F4B) of section size 46x25x3mm confirming to IS7452/1990.The shuttersare individual and each of them can be operated separately.Sashbars are made of 'T'section (T2) of size25x22x3m,2 nos of sturdy hinges and one numbers of handle cums latch of special type are fixed for with openable shutter. Suitable opening is left for its any operation.One number of adjustable stay with locking bracket of sufficient length shall be provided for each shutter 4nos. of 40x40x3mm anngle hold fast 230mm length are welded to the outer frame at appropriate point. M.Ssquarebarsof12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacings ,20 gauge MS sheet is used for covering the shutter. Grill members are painted with one coat of primer. Also rate is inclusive

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required - 1 m2 (CBE DATA 24-25 P-120 ITEM - 7)

Painting with best synthetic enamel paint of approved Colour two coats for new Iron work including one coat of priming coat and using the best quality Iron primer and best quality synthetic enamel paint etc complete complying with standard specification (CBE DATA 24-25 P-118 ITEM - 1)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator)( ELECTRICAL DATA 23-24 P-1 SD-1)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.(ELECTRICAL DATA 23-24 P-8 SD-12)

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylum sheet for 15A 3pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open power plug point(ELECTRICAL DATA 23-24 P-9 SD-14)

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (ELECTRICAL DATA 23-24 P-44 SD-88)

Supplying and fixing of 1200mm(48")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16") (ELECTRICAL DATA 23-24 P-52 SD-106)

Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 7/20 GI bearer Wire for service connection Mains.

Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 11 Watts CFL Bulb Bulb(ELECTRICAL DATA 23-24 P-42 SD-83)

Supply and Fixing in Position of 48W LED Street Light Fitting with LED Luminaire With necessary Breacket , Bowl and necessary Clamps and Nuts as per ISI quality as per the direction of the departemental officers Etc., Complete.

Flooring with 20mm thick cement concrete 1:3 mix (no sand to be used) using 3mm to 10mm ISS gauge HBBG chips and the surface rubbed hard and finished smooth with neat cement Ellise pattern surface

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles, complete complying with standard specification and as directed by the departmental officers.

CEMENT CONCRETE 1:2:4 (One Cement, two sand and four aggregate) using 20 mm gauge hard broken granite stone jelly including dewatering if found necessary and laid in layers of not more than 15 cm thick, complying with standard specification.

Supplying and fixin in position of solid PVC DOOR SHUTTERS using 19 gauge 19 mm MS sq tubes for styles and outer frames. 15mm MS square tubes for top,lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.shutter usingetc.

Supply and fixing of HDPE Tank as per IS 12701/1996 including loading, unloading, transportation and labour charges and fixing of pipes and specials for pipe connection works as per direction of departmental officers.

Supply and Fixing of 1 HP Motor with pumpset as per Standard Quality as per the Direction of the Departmental officers etc., complete.

MAHA BUILDERS (BID ID -1272646)