Loading…
Loading…
Tender Value
₹70.0 L
EMD Value
₹1.4 L
Closing Date
26 Aug 2026, 12:00 pm2d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-B of Chapter-7 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet, otherwise the offer is liable for rejection.
(a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of the tender.(b)(1) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard GCC or through subcontractor fulfilling the requirements as per clause 7 of the Standard GCC or jointly i.e.,partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s),and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility.Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard GCC, with prior approval of Chief Engineer in writing.(Refer Item 10.1 of Chapter-2 of Annexed Document)
Defination of Similar Work :- Any Civil Engineering work comprising of construction of any residential/office building.
65 conditions · 6 needing a document upload
All Optional documents to be submitted before signing of Contract Agreement/or at the time of submission of Bid.
List of documents which are to be submitted by the tenderer along with their offer failing which the tender shall be summarily rejected.
If Bid Security is submitted through mode of Bank Guarantee then submission of scanned copy of the Bank Guarantee towards Bid Security of the bid on e-tendering portal (IREPS) and original of above Bank Guarantee before closing date of submission of bids (i.e. excluding the last date of submission of bids) as per Para-5 of Instructions to Tenderers (ITT) in Chapter- 2 and Para-6, Annexure-I in Chapter-2 of Annexed Document.
Technical Eligibility Criteria as per Para 10.1 & Para 17.15.1 of Chapter-2
Financial Eligibility Criteria as per Para 10.2 & 17.15.2 of Chapter-2 along with Certificate issued from Chartered Accountant.
Bid Capacity as per Para 10.3 & 17.15.3 duly filled up Annexure- G, Chapter-7 of Annexed Document.
Certificate as per the proforma enclosed vide Annexure-A and an additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be as per Annexure-A1 vide Chapter-7 of the Annexed Document.
Power of attorney duly notarized and in in favour of a single individual should be submitted. As per Para 14,15, 17 & 18 of SGCC.
List of important documents which are to be submitted by the tenderer along with their offer.
Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Certificates regarding contractual payments received, along with duly filled up Annexure-B, Chapter-7 of Annexed Document, to this effect which may be an attested Certificate from the concerned department/client or Audited Balance Sheet duly certified by the Chartered Accountant duly supported by Audited Balance Sheet.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document.
List of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure- E, Chapter-7 of the Annexed Document.
Details of works completed/substantially completed during previous 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document.
All documents reflected as Mandatory in the Commercial Compliance are to be submitted other wise the offer is liable to be rejected.
The tenderer shall possess valid "Electrical Contractor's License as per CEA regulation, 2010 OR Electrical works under the contract shall be got executed through a sub-contractor having valid "Electrical Contractor's License". An undertaking shall be submitted by the tenderer in this regard. (This document/ submission may be classified as optional submission which maybe submitted before execution of agreement.)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Please submit copy of Certificate as per the proforma enclosed vide Annexure-A, Chapter-7 of the Annexed Document. An additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of the Certificates by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please submit details of the constitution of Firm i.e. Proprietary Firm/Partnership Fm/HUF/JV/Company Registered under Companies Act-2013/Limited Liability Partnership/Registered Society & Registered Trust etc along with signed Annexure-C, Chapter-7 of the Annexed Document.And also submit the following mandatory supporting documents such as copies of Partnership Deed, Power of Attorney, Memorandum of Articles, Articles of Association, Authorisation, Certificate of Incorporation, Certificate of Registration, Deed of Formation, Memorandum of Understanding, JV Agreement etc as applicable under Para 14, 15, 17 & 18 of Annexure-I, Chapter-2 of Annexed Document. Important Note:-(a)The Power of Attorney duly Notarized shall be submitted even if such specific person is authorized for above purpose through Partnership Deed/Memorandum of Understanding/Article of Association or such other document. (b) In case one or more of the members of JV is/are partnership firm(s)/Proprietary Firm/HUF/Companies/LLP Firm(s)/Society(s)/Trust(s), the required documents of each individual member of JV shall be submitted along with the documents to be submitted on behalf of the JV. (c) Non- submission of above documents (except PAN Card & Undertaking regarding not blacklisted/debarred from participation of tenders/contracts) or submission of incomplete documents shall lead to summarily rejection of the offer.
Please submit copy of the PAN Card.
Please submit list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document. Non-compliance with this condition liable to result in the tender being rejected.
Please submit list of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure-E, Chapter-7 of the Annexed Document. Non- compliance with this condition liable to result in the tender being rejected.
Please submit details of works successfully completed or substantially completed during last 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document. Non-compliance with this condition is liable to result in the tender being rejected.
The tenderer(s) are required to upload the information as per Annexure-G of Chapter-7, Annexed Document duly signed by the tenderer(s) and verified by Chartered Accountant since the information is required to evaluate the bid capacity of the tenderer(s) for tenders valuing more than Rs. 20 Cr. However, the tenderer(s) may submit any additional information, if they desire so. In case, the tenderer(s) failed to submit the minimum required information as per Annexure-G of Chapter- 7 along with the offer or submit in any other format omitting required information essential to work out Bid capacity, his/their offer shall be rejected summarily. This information is to be based on Annexure-B & Annexure-G1, Chapter-7 of Annexed Document.
Please submit the required information for evaluation of Bid Capacity as per Annexure-G1, Chapter-7 of the Annexed Document.
Please submit the information regarding association of Railway Officers with tenderer(s) in reference to Clause 16, Chapter-2 of Annexed Document along with the declaration as per the format vide Annexure-H, Chapter-7 of the Annexed Document. Also non-submission of information required as per Clause 16 (a), (b) & (c) of Chapter-2 in Annexed Document, contract is liable to be dealt in accordance with provision of Clause 43 of Chapter-3 (Clause 62 of General Conditions of Contract).
Please submit list of court cases as per the format vide Annexure-I, Chapter-7 of the Annexed Document.
Please submit list of arbitration cases as per the format vide Annexure-J, Chapter-7 of the Annexed Document.
Please submit broad plan of execution of work as per the format vide Annexure-K, Chapter-7 of the Annexed Document.
Please submit details of other credentials/facilities as per the format vide Annexure-N, Chapter-7 of the Annexed Document.
Please submit your bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through ECS/NEFT/RTGS as per Annexure-O of Chapter-7 of Annexed Document. In lieu of Bank Certificate, scanned copy of a cancelled cheque may be attached for verification of the above particulars.
If Bid Security is submitted through mode of Bank Guarantee then please upload scanned copy of the Bank Guarantee (as per Specimen Format at Annexure-Q, Chapter-7 of Annexed Document) submitted towards Bid Security, original of which should be delivered in person to the official nominated as indicated in the tender document before closing date of submission of bids (i.e. excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within above specified period shall lead to summary rejection of bid. In case of the Bid Security deposited through e- payment gateway, then the same should be confirmed by the tenderer.
Please submit the option for taking payment through Letter of Credit (LC) arrangement for tenders having advertised cost of Rs. 10 lakhs and above. For details refer Clause-7, Chapter- 4 of Annexed Document.
Please submit the required certificate (duly certified by a Cost Accountant /CA)as per Clause 8.9(b), Chapter-4 of Annexed Document.
Please submit the Tender Form i.e. Annexure-I of Chapter-2 of Annexed Document.
Construction of First Floor consisting of 06 (Six) Nos. Office Rooms over the existing Ground Floor Building of Electrical Stores Office at Mancheswar, Bhubaneswar, including Covered Shed, Bike Shed and other ancillary/miscellaneous works.
ETCECONIIBBS2026026~ECOR
ETCECONIIBBS2026026
Open
Works - General
10 Months
Khordha, Odisha
₹0
₹1.4 L
4 Aug 2026
4 Aug 2026
12 Aug 2026
82 items across 3 schedules · ₹68,00,143.26 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 30 | 177.5 | 5,325 |
| 2 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 3 | 8,340.85 | 25,022.55 |
| 3 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 6 | 9,045.75 | 54,274.5 |
| 4 | cum | 20 | 11,505.5 | 2,30,110 | |
| 5 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 50 | 392.15 | 19,607.5 |
| 6 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 587 | 927.25 | 5,44,295.75 |
| 7 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 53 | 736.4 | 39,029.2 |
| 8 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 103 | 961.3 | 99,013.9 |
| 9 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | Sqm | 406 | 300.45 | 1,21,982.7 |
| 10 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 39 | 10,011.35 | 3,90,442.65 |
| 11 | Cement mortar 1:3 (1 cement :3 coarse sand) | Sqm | 2.5 | 1,150.5 | 2,876.25 |
| 12 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 101 | 8,962.35 | 9,05,197.35 |
| 13 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 8 | 121.65 | 973.2 |
| 14 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 8 | 1,124.85 | 8,998.8 |
| 15 | Extruded section profile size 42x50 mm | Metre | 15 | 331.35 | 4,970.25 |
| 16 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm ( +/- 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ( +/- 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm ( +/- 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ( +/- 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). | Sqm | 5 | 2,969.25 | 14,846.25 |
| 17 | Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). | Sqm | 13 | 8,298.85 | 1,07,885.05 |
| 18 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 900 | 117.35 | 1,05,615 |
| 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 575 | 133.7 | 76,877.5 |
| 20 | Using M.S. angels 40x40x6 mm for diagonal braces | Sqm | 20 | 5,804.35 | 1,16,087 |
| 21 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 15 | 172.6 | 2,589 |
| 22 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Sqm | 500 | 1,056.15 | 5,28,075 |
| 23 | Acid and alkali resistant tile | Sqm | 15 | 1,738.15 | 26,072.25 |
| 24 | Acid and alkali resistant tile | Sqm | 40 | 1,884.9 | 75,396 |
| 25 | Size of Tile 600x600 mm | Sqm | 15 | 1,623.05 | 24,345.75 |
| 26 | Size of Tile 1000x1000 mm | Sqm | 145 | 2,264.9 | 3,28,410.5 |
| 27 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 100 | 195.6 | 19,560 |
| 28 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 110 | 738.65 | 81,251.5 |
| 29 | 1:4 (1 cement: 4 fine sand) | Sqm | 140 | 347.05 | 48,587 |
| 30 | 1:4 (1 cement: 4 fine sand) | Sqm | 40 | 399.45 | 15,978 |
| 31 | 1:3 (1 cement : 3 fine sand) | Sqm | 750 | 300.45 | 2,25,337.5 |
| 32 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 450 | 185.65 | 83,542.5 |
| 33 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 300 | 160.6 | 48,180 |
| 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 450 | 156.05 | 70,222.5 |
| 35 | In cement mortar | cum | 1 | 2,060.2 | 2,060.2 |
| 36 | For thickness of tiles above 25 mm and up to 40 mm | Sqm | 500 | 113.35 | 56,675 |
| 37 | 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. | Sqm | 110 | 1,045.65 | 1,15,021.5 |
| 38 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 3 | 6,515.55 | 19,546.65 |
| 39 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 1 | 2,648.85 | 2,648.85 |
| 40 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 3 | 349.15 | 1,047.45 |
| Schedule total | ₹46,47,977.55 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexed Document
ATTACHMENT
AnnexedDocument-2026026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].