Renovation of Road of Lucknow Branch in Left Bank from km 73.480 to km 73.960 km 98.366 to

Amount

cleaning Jungle including uprouting of trank vegetation grass, buss,wood, tries & saplings of girth up to 30 cm. Measured at a height of 1 metres above ground level & removel of rubbish upto a distance of 50 metres out side the pariphery of area cleaned.

Providing, Laying, spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Smooth wheel roller 80-100 KN in stage to proper grade and camber, applying and brooming, stone screening to fill up the characterstices of coarse aggregate, watering and compacting to the required density

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means

Earth work in excavation including lead upto 30m & filt upto 1.5m, excluding mechanical compaction but including manual compaction and dressing to profile in road upto 1.5m height. As per IdDsOR 2021-22 Chap V item-5(a)

Eding with straight over burnt bricks, laind dry length wise including excavation, refilling, consolidation with a hand packing and sprading nearly, surplus earth with a lead of 50m.

Providing and applying tack coat with bitumen vg-10 using bitumen presure distibutor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom

Providing laying and rolling of open graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per MoRTH Technical specification class 510 including All cost and labour material.

Providing and laying seal coat "C" type sealing the voids in a bituminous surface laid to the specified levels. Grade and cross fall.

Providing and laying of hot applied thermoplastic comound 5mm thick including reflectorising glass beads@ 500 gms per sqm area, thickness of 5mm is exclusive of surface applied glass beads as per IRC-35-2015. The finished surface to be level, uniform and free from streaks and holes.

Supplying and fixing sign board on angle iron frame 40x40x6 mm 25x5 mm flat iron bracing sand 18 SWG (1.25mm)MS Sheet with one coat of red oxide promer including Earth work and fixing in position wit C:C(400x300x300mm) in 1:2:4 with stone grit. (all work as per direction of Engineer-In-charge) including cost of all material labour T&P etc.

PRAVEEN KUMAR BAJPAI (BID ID -4987513)