Renovation of the building and Sound proofing of Main Hall in Community Centre , Sunder Nagar, Mauli Jagran Part-2, Chandigarh.

Dismantling tile work in walls fixed with cement mortar including disposal of material within 2 km metres lead complete in all respects to the entire satisfaction of Engineer-In-Charge (N.S)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement : 4 fine sand) complete in all respect to the entire satisfaction of the E.I.C (DSR 13.2.1)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :(DSR 15.12.1)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Kiln seasoned and chemically treated Hollock wood. (DSR 9.1.3)

Accoustic Doors:- Providing and fixing of accounstic double panneled doors with splayed/recessed joint in centre for entry by providing 12mm thick commercial ply on both side fixed on wooden frame of 2nd class hard wood bettens of size1" x 2" having grid@ 2-0" CIC on both sides duly filled with providing and laying 50mm thick rock wool with 48kg density, packed with tissue paper to achieve NRC 0.7% (manufacturing test certificate is required at the time of billing ) and fixing of 4mm thick teak veneering with froove is to be fixed on both side of approved brand. The door shall have 2 Nos shutter on each side with folding arrangements and properly ecentrically tied with existing chowkhat during opening. The accoustical door shall be properly fixed with existing chowkhat with the help o f 6 Nos SS hinges of size 5" orn both shutters and also hinges in center with sound sealing arrangenments.The door shall have 1-0" size SS handles (4 nos each door) and 1'-0" long S tower bolts (2 nos each door) and (1 no sliding door bolt of size 300-450mm) complete fixed with help of nails. The door shall also includes the cost of PU polish including cost of filler and all hardware material of Stainless steel i.e locking arrangement, slidding bolts, towers bolts and handles complete in all respect the entire satisfaction of Engineer-In-Charge.(N.S)

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge (DSR 12.53)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board (DSR 12.45.3)

Providing and fixing fire resistance stretch fabric of brand of nexzen, responce febric & Bhanswara approved shade and colour with back filled of 50mm thick rock wool with 48kg density, packed with tissue paper to achieve NRC 0.7% (manufacturing test certificate is required at the time of billing ) with help of G.l. channels frame (Horizontal & vertical members) , 9mm thick ply with the 6" width and PVC grippers on the both side cdc 600mmx600mm and also including the cost of chicken mesh and making openings for light fitting, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed complete in all respect and to the entire satisfaction of Engineer-in-Charge (N.S)

Providing and fixing 4mm thick polished veneer over 9 mm thick commercial ply over USG Boral frame U Channel 50x50x0.55mm both side 2'-0" centre to centre (Horizontal & vertical) with back filled of 50mm thick rock wool with 48kg density, packed with tissue paper to achieve NRC 0.7% (manufacturing test certificate is required at the time of billing ) along with 12mm thick commercial ply & PVC grippers as per site including covered the Jamb for door & windows i.e upper, bottom sides & sills area by providing color matching sunmica over 12mm thick commercial ply as per site requirements also including the cost of chicken mesh and making openings for light fitting, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed. The rates also include the cost of all material and labour and lead and fit complete in all respect and to the entire satisfaction of the entire satisfaction of Engineer-in-Charge (N.S)

Extra for providing computerized laser cutting to ply/boardlveneer wherever required as per site requiement complete in all respect to the entire satisfaction of Engineer-ln-Charge. (N.S)