GE/SRA/T-42/2024-25

Amount

Taking down carefully unservicable Flood Light/High Bay light fittings and fixtures, any type or capacity from ceiling of hangars including ceiling roses, screw, connecting cable etc and removal from site complete all as specified and directed.

S&F LED Flameproof Flood Light fitting, 250 watt capacity, CMRI & PESO Certified with high powered LED in SMD arrangement, in high pressure die cast aluminium housing, epoxy powder coated finish with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and heat resistant clear Type-A toughened glass cover, cable entry M20 (02 Nos) with gland & plug, IP66 grade ingress protection suitable for operating voltage 140V-270V AC, 50 Hz complete all as specified and directed and complying with the following specifications:-. (a) system efficacy more than 100 lumen/watt (b) CRI > 80, (c) THD < 10% (d) Power factor not less than 0.95 (e) having 10 KV surge protection (f) colour temperature between 6000-6500 degree K (g) Earthing 01 No Internal & 02 Nos External (MAKE: SUDHIR SWITCHGEARS PVT LTD, Cat No: WG/1240/FL/250 or equivalent model in CROMPTON / SHYAAM SWITCHGEAR (P) LIMITED / BALIGA / BAJAJ)

S&F Switch Flame Proof Rotary type with Termination Box in LM6, 16 Amp, Single Pole, 250 Volts complete all as specified and as directed.

M&L Flame Proof Sub-main Wiring with 2-Runs of 2.50 Sqmm Single Core, Halogen Free Flame Retardant (FRLSH) insulated, multi-stranded, unsheathed 1100 Volt grade Copper Conductor Cable and 1-Run of 2.50 Sqmm Earth Continuity Wire of Single Core, Halogen Free Flame Retardant (FRLSH) insulated, multi-stranded, unsheathed, 1100 Volt grade Copper Conductor Cable (Green Colour), drawn in/through and including 19 mm dia ERW CONDUIT including taking down existing sub main wiring complete all as specified and directed. NOTES: (i) Three runs of single core 2.50 sqmm wire and One run of ERW Conduit shall be measured as one unit.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

GENERAL NOTES:- 1) The work is required to be executed at a height of more than 15 metres. Contractor shall ensure all safety measures for safety of the workers during execution of work. 2) Requisite T&P, machinery e.g hydra etc for execution of work at the specified height shall be procured by the contractor under his own arrangement. 3) For execution of the work, existing bird proofing wire mesh, if required shall be cut/removed/taken down and re-fixed properly as per existing provision duly tied with wires after completion of electrical work. Quoted rate shall be deemed to include for the above aspect and no claim/dispute shall be entertained during currency of work. 4) List of approved makes has been provided in particular specifications. Contractor shall ensure that luminaire proposed complies with the specifications listed above as well as under particular specifications. The contractor shall submit requisite test certificates and other supporting documents alongwith his application for approval of make of the proposed luminaire. No claim shall be entertained during currency of work.

YOGINDER KUMAR GUPTA AND COMPANY

NISHTHA BUILDERS

shiv shanker enterprises

M/S SODHI ASSOCIATES

M/s Shree Bala Ji Construction Company