RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Laboratory Benches ( 19 meter ) ( Under PAC ) Make godrejinterio 1/5 Model godrejcovalentlaboratorybench900x920x900mm Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Laboratory benches required for Chemistry Lab Chemistry Lab Module of laboratory benches 1-seater 1-seater Type of back of work benches Wall side type Wall side type Design Without any fitting(Bio- Lab) Without any fitting(Bio- Lab) Underbench storage With drawers only With drawers only Overhead storage Wall mounted Wall mounted Peg board With With Faucet Deck mounted Deck mounted Type of Water Faucet 2 way water Flow 2 way water Flow Mode of Supply Assembled Ready To Use Assembled Ready To Use MATERIAL Main understructure (+/- 2 mm) C-frame assemblies from standard hollow section conforming to IS 7138/Latest size 60mm X 30mm X 2mm thick with CRC sheet of 18 X 20 gauge conforming to IS 513/Latest C-frame assemblies from standard hollow section conforming to IS 7138/Latest size 60mm X 30mm X 2mm thick with CRC sheet of 18 X 20 gauge conforming to IS 513/Latest Top material Prepolished granite finish Prepolished granite finish Thickness of top material (+/- 2 mm) 18 18.0 Removable back panel
Requiredside cover panel
Requiredfiller panels Made of CRCA MS 1mm thickness and coated with epoxy powder Made of CRCA MS 1mm thickness and coated with epoxy powder Openable master upright (+/- 5%) N.A * Vertical upright (Electric supply systems shelves and top unit) N.A * 2/5 Adjustable reagent shelves N.A * Sink material NA NA Pulls on drawer/cabinet NA * Material of peg board N.A * Material faucet NA * Material of shelves N.A N.A DIMENSION Width in mm (+/- 5%) 900 mm (1-seater) 900 mm (1-seater) Depth in mm (+/- 5%) 920 mm (2-seater for wall side table) 920 mm (2-seater for wall side table) Height in mm (+/- 5%) 900 900.0 Dimension of sink (+/- 5%) N.A * Size of faucets N.A * MISC Benches having N.A * Exposed edges of top To be chamfered and smoothened * Drainage gradient Well adjusted throughout the length of table should have horizontal supports for drainage systems * Number of pegs As per buyer's choice * Sink area under the table N.A * Operatable/Openable flip top box Used for physics Lab N.A * Console unit for physics Lab N.A * Chemical reagent storage N.A * Number of shutter (Under bench storage) One One Adjustable shelves N.A N.A Shutters No shutters No shutters Overhead storage ±5mm 750mm X 125mm X 750mm 750mm X 125mm X 750mm Type of storage cabinet N.A * Number of drawers 1 * COLOUR & FINISH Finish Frame work to be pretreated with * 3/5 superior pure epoxy powder coated finish Colour of benches As per buyer's choice * Colour of sink As per buyer's choice * Number of shelves 0 * WARRANTY Warranty period in number of years 1 1
Required2
Required3 Or higher CERTIFICATION Test reports to be furnished to buyer's on demand NO * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.