Development of Half rake to full rake Loading/Unloading facility on Loop line 2 at DEOLI Goods Shed with labor room, Merchant room, CC road etc.

Circulating Area, Approach road, Drain and Labour Room, merchant room at Deoli station.

Item- 01 (DSR-2023)--Provision of Merchant room (10x5) sqm

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical

means (Hydraulic excavator) / manual

means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan),

2.8 including dressing of sides and ramming of

bottoms, for all lift, including getting out the

excavated soil and disposal of surplus

excavated soil as directed, within a lead of

2.25 Filling available excavated earth (excluding cum 4 196 784

rock) in trenches, plinth, sides of foundations

etc. in layers not exceeding 20 cm in depth,

consolidating each deposited layer by

ramming and watering, lead up to 50 and for

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - All work up

to plinth level :

derived from natural sources : 4 graded

stone aggregate 20 mm nominal size

derived from natural sources)

derived from natural sources : 6 graded

stone aggregate 20 mm nominal size

derived from natural sources)

4.10S DAMP-PROOF COURSE

4.10 Providing and laying damp-proof course Sqm 9 410.85 3697.65

40mm thick with cement concrete 1:2:4 (1

cement : 2 coarse sand (zone-III) derived

from natural sources : 4 graded stone

aggregate 12.5mm nominal size derived

from natural sources)

5.0 REINFORCEMENT CEMENT CONCRETE

5.1S CAST IN SITU

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and laying in position specified

grade of reinforced cement concrete,

5.1 excluding the cost of centering, shuttering,

finishing and reinforcement - All work up to

derived from natural sources : 3 graded

stone aggregate 20 mm nominal size

derived from natural sources)

Reinforced cement concrete work in walls

(any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets,

5.2 columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five

level, excluding cost of centering, shuttering,

finishing and reinforcement :

derived from natural sources : 3 graded

stone aggregate 20 mm nominal size

derived from natural sources)

5.3 Reinforced cement concrete work in beams, cum 20 11505.5 230110

suspended floors, roofs having slope up to

15 degree landings, balconies, shelves,

chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above plinth

8 level up to floor five level, excluding the cost

of centering, shuttering, finishing and

reinforcement with 1:1.5:3 (1 cement : 1.5

coarse sand(zone-III) derived from natural

sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources).

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 30 392.15 11764.5

for mass concrete

5.9.3 Suspended floors, roofs, landings, balconies Sqm 100 927.25 92725

and access platform

5.9.5 Lintels, beams, plinth beams, girders, Sqm 150 736.4 110460

bressummers and cantilevers

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Kg 1800 107.85 194130

Fe-500D or more.

6.0 MASONRY WORK

6.26S EXPOSED BRICK WALL

Brick work with non modular fly ash bricks

conforming to IS:12894, class designation 10

6.34 average compressive strength in super

structure above plinth level up to floor V

8.0 CLADDING WORK

8.1S General

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and fixing 18 mm thick gang saw

cut, mirror polished, premoulded and

prepolished, machine cut for kitchen

platforms, vanity counters, window sills,

facias and similar locations of required size,

approved shade, colour and texture laid over

20 mm thick base cement mortar 1:4 (1

cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high

gloss finish etc. complete at all levels

Granite stone slab colour black, Cherry/Ruby

9.0 WOOD AND P.V.C. WORK

9.1S FRAMES AND TRUSSES

Providing wood work in frames of doors,

windows, clerestory windows and other

frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of

required dia & length (hold fast lugs or dash

fastener shall be paid for separately).

Providing and fixing ISI marked flush door

shutters conforming to IS : 2202 (Part I)

decorative type, core of block board

9.20 construction with frame of 1st class hard

wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face

veneers on both faces of shutters.

9.20.2 30 mm thick including ISI marked Stainless Sqm 2 3167.95 6335.9

Steel butt hinges with necessary screws

9.40S MISCELLANEOUS-WOOD WORK

Providing and fixing M.S. grills of required

pattern in frames of windows etc. with M.S.

9.48 flats, square or round bars etc. including

priming coat with approved steel primer all

9.55S BRIGHT FINISHED M.S. FITTINGS

Providing and fixing ISI marked IS:1341 M.S.

9.55 pressed butt hinges bright finished with

necessary screws etc. complete :

COPER OXIDISED MILD STEEL FITTINGS

(COPPER OXIDISED AS PER IS: 1378)

Providing and fixing ISI marked oxidised M.S.

tower bolt black finish, (Barrel type) with

necessary screws etc. complete (Copper

oxidised as per IS 1378)

ANODISED ALUMINIUM FITTINGS (ALL

FITTINGS SHALL BE ISI MARKED)

Providing and fixing aluminium handles, ISI

marked, anodised (anodic coating not less

9.100 than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or

shade, with necessary screws etc. complete :

10.0 STEEL WORK

10.1S General

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing & fixing fly proof wire gauze to

windows, clerestory windows & doors with

M.S. Flat 15x3 mm and nuts & bolts

10.29.2 Stainless steel (grade 304) wire gauze of 0.5 Sqm 10 1133.55 11335.5

21 mm dia wire and 1.4 mm aperture on both

11.0 FLOORING

11.41S VITRIFIED FLOOR TILES

Providing and laying vitrified floor tiles in

different sizes (thickness to be specified by

the manufacturer) with water absorption less

than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades,

laid on 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and

matching pigments etc., complete.

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

15 mm cement plaster on the rough side of

single or half brick wall of mix :

13.37S INTERIOR FINISHING

Distempering with 1st quality acrylic

distemper (ready mixed) having VOC content

less than 50 gram/litre, of approved

manufacturer and of required shade and

colour all complete to achieve even shade

13.41.1 New work (two or more coats) over and Sqm 80 185.65 14852

including water thinnable priming coat with

cement primer having VOC content less than

13.44S EXTERIOR FINISHING

Finishing walls with Premium Acrylic Smooth

13.47 exterior paint with Silicone additives of

required shade:

13.47.1 New work (Two or more coats applied @ 1.43 Sqm 120 171.1 20532

26 ltr/10 sqm over and including priming coat of

exterior primer applied @ 0.90 litre/10 sqm)

Finishing with Deluxe Multi surface paint

13.48 system for interiors and exteriors using

Primer as per manufacturers specifications :

13.48.2 Painting wood work with Deluxe Multi Sqm 1.1 176.25 193.88

Surface Paint of required shade. Two or more

27 coat applied @ 0.90 ltr/10 sqm over an under

coat of primer applied @0.75 ltr/10 sqm of

approved brand and manufacture

13.48.3 Painting Steel work with Deluxe Multi Surface Sqm 9 170.7 1536.3

Paint to give an even shade. Two or more

28 coat applied @ 0.90 ltr/10 sqm over an under

coat of primer applied @ 0.80 ltr/10 sqm of

approved brand and manufacture

13.80 Providing and applying white cement based Sqm 220 156.05 34331

putty of average thickness 1 mm, of

29 approved brand and manufacturer, over the

plastered wall surface to prepare the surface

even and smooth complete.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and fixing G.I. pipes complete with

18.12 G.I. fittings including trenching and refilling

etc. External work

18.15S BRASS FITTINGS

Providing and fixing gun metal gate valve

18.17 with C.I. wheel of approved quality (screwed