WBPWD/EE/PMED/NIQ-06/e-Q /2021-2022(3rd Re-Tender)

Amount

Supply, Installation, Testing & commissioning of 1Ph/1Ph, IGBT based, DSP controlled, PWM technology double conversion true Online 6KVA UPS system having inbuilt Isolation Transformer at O/P with 12V SMF battery to provide 60Mints backup along with MS rack for battery & battery interconnecting cables. Battery VAH: 8064/ Sutable for cattering 60min. backup. Battery Make: Exide/Quanta Warenty: Not lessthen 3 years incl. Battery & UPS. Make : APC/ EMERSON/ POWERONE/ AVO

Supply, Installation, Testing & commissioning of 1Ph/1Ph, IGBT based, DSP controlled, PWM technology double conversion true Online 2KVA UPS system having inbuilt Isolation Transformer at O/P with 12V SMF battery to provide 60Mints backup along with MS rack for battery & battery interconnecting cables. Battery VAH: 2496/ Sutable for cattering 60min. backup. Battery Make: Exide/Quanta Warenty: Not lessthen 3 years incl. Battery & UPS. Make : APC/ EMERSON/ POWERONE/ AVO

Supplying and fixing 240V, 6-10A per way, (2+12) SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 40A DP MCB type Isolator, 12 no. 6-16A SPMCB. (Make - Schneider (A9HSND12)/ Siemens/ Legrand)

Supplying and fixing 240V, 6-10A per way, (2+8) SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 40A DP MCB type Isolator, 8 no. 6-16A SPMCB. (Make - Schneider (A9HSND08)/ Siemens/ Legrand)

Supplying & Fixing Industrial Plug & Socket board with 240 V, 32A, SPN & Earth Metal Industrial Plug socket & 32A Industrial top incl. S&F 32 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. (Make- L&T/ Schneider/ Legrand)

Supply & Fixing 240 V, 1 nos. 6A, & 1 no. 20A plug socket with separate 1 nos. 6 A & 1 no. 20A Piano key type switch(Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200x150x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

a) 2 x 84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC

b) 2 X 36/0.3 (2.5 sqmm) + 1 X 22/0.3 (1.5 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a) 6 sq.mm.

b) 4 sq.mm.

c) 2.5 sq.mm.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by TATA-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F 6 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making onnection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Providing & fixing of 1200mm x 450mm x 950mm size cover fencing made by M.S. angle M.S. Pati, Net & 3.15mm 10SWG thick CRCA sheet. This fencing comprising with 4 (four) Nos double door (all side) i.e. total 4 nos pillars top portion covered by CRCA sheet and total 4 side cover by Net guard a) Main structure made by 40mm x 40mm x 6mm M.S. angle. b) Door structure made by 25mm x 25mm x 5mm M.S. Angle. c) Support structure made by 25mm x 5mm M.S. Pati. d) Special type Kabja - 16 Nos. e) Special type chitkani - 4 nos. f) 25mm 25mm IRC Net Guard. g) 10SFT 3.15mm 10 SWG thick CRCA Sheet - 1 no. The complete set should be painted with one coat of Red lead primer and two coats of synthetic enamelled paint of approved make. The complete ste should grouted on C.C. foundation.

Supply, installation, testing & commissioning of cubical type panel board with separate compartmentalized floor mounted, indoor type dust and vermin proof powder coated panel board, suitable for 415V 3phase, 4wire,50Hz, A.C supply of suitable size made out of 14 SWG (2mm.) thick CRCA/M.S. sheet wih angle (50X50X6 mm) , flat ( 50 X 6 mm) structure with individually hinged capsule door for all compartment with lock ,providing ventilation arrangement & free standing from floor mounting . The control panel should have suitable cable entry from bottom of back through detachable gland plate (100mm.x40mm.x4mm.) thick M.S. channel to access sufficient no of incoming & outgoing cable Incl. suitable size G.I. net guard with key & locking arrengement with interconnection with adequate size cu. wire, copper bar, cu link, cable connector etc. along with necy. nuts, bolts, clamps, grouting bolts incl. providing and fixing the following accessories etc. complete as required. (Make : L&T/ ABB/ Schneider) Incoming:- a) S & F 415A, 415V TPN Switch disconnector fuse unit open execution type with 3 Nos din type HRC fuse link--1 nos. Busbar :- S & F 415 V, 600 A current carrying capacity electrolytic grade tinned copper BBC of size having bus bar dimension of (4 x (2 x 40 mm x 5mm)) will be fixed on FRP Chair & the entire bars are insulated with PVC heat sinkable sleeves with suitable size & colour as per.

Outgoing Switch Fuse Unit: a) S & F 250A, 415V TPN Switch disconnector fuse unit open execution type with 3 Nos din type HRC fuse link--2 nos. b) S & F 415V, 200A FP MCCB 25KA/35KA capacity incl. rotary handel with door locking arrangement--1 nos.

Supply & Laying of 4x 185 sq mm single core FR PVC insulated 1.1 KV grade standared Copper (Unsheathed) Flexible Cables conductor (as per IS 694) laying on existing flexible conduite (Make- Policab/ Havells/ KEI)

S & Fixing 75 mm dia heavy duty fexible PVC pipe suitable for laying of copper cable along with necessary 2 nos rubber gasket. Incl. S & F 2 nos PVC glad with proper thread.

Supplying & fixing of 80mm. Dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Cutting concreat floor avg. dept. 100mm to concealed the Gi pipe and mending good dameges.

Finishing of the 185sq. Mm. PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes

Fixing only outdoor / street light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

S & Delivery of 90 watt LED Outdoor luminaries for road lighting. Make: Havells, cat no- ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO/ Crompton/ Bajaj)

Supply and fixing of 250 V timer DB (equivalent of 8 way SPN DB in size) with sheet steel enclose double door , phosphatised powder coated, neutral bar , din rail with IP-43 protection comprised with 1 no 20A/25A DP MCB (‘C’ Curve, 10KA), 1 no 24 hours programmable timer switch with minimum switching time of 15 minutes and 1 no 18A/DP power contactor complete with internal wiring by 4 sq mm size of copper wire incl. 1 no auto manual by pass 25 A MCB changeover switch and provision for earthing attachment incl. LED indicating light for running condition of street light with locking arrangement (Make- Hager/ ABB/ Legrand/ L&T/ Crabtree)

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply and Laying of 2core 6sq mm. Aluminium armoured XLPE insulated 1.1 KV volts Grade power cable IS: 7098 (Part-I) 1988 cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. (Make - Gloster/ Polycab/ Havells) (For compound Light)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables . Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. a) 2core 6sq mm.

Supplying and fixing 20 dia PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works

R K ENTERPRISE

ROY CHOWDHURY AND CO

M/S JOGMAYA ENTERPRISE