Special repair to Dr. Radha Krishana Medical College at Hamirpur

Amount

Demolition above ground level upto all floro level including stacking of serviceable material and disposal of unserviceable materials within all leads and lifts in reinforced cement concrete upto 15cm (Fifteen centimeters) thickness complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-In-Charge.

Demolition of stone masonry above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all lead including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.

Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts, disposed materials to be neatly levelled.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work including entire carriage of materials within all leads, lifts and technical specifications by the direction of Engineer-in-Charge and all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundation Footings, basis of column etcetera mass concrete.

Providing and laying cement concrete mechanically mixed and vibrated 1:3:6 ( One cement : three coarse sand : six graded/crushed stone aggregate 40mm (Forty millimetre) nominal size and curing complete in foundation plinth excluding cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete M-10 grade and curing complete excluding cost of form work in foundation and plinth in breast, retaining walls and courtyard etcetera including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete M-20 Grade and curing complete excluding cost of form work in foundation and plinth in courtyard, path and steps including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 60mm (Sixty millimeters) heavy duty precast cement concrete interlocking paver blocks Grey and red 50% each manufactured by the help of Hydro vibratory machine having compressive strength of M-50 (M-Fifty) grade as per IS-15658-2006. (N.T.C. make National Tile Corporation including border or curve block grey or coloured approved by Engineer-in-Charge. The paver shall be laid on 40mm (Forty millimeters) sand filling compacted as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 22mm (Twenty two millimetre) thick checkered tiles Grey with chips of sizes upto 22mm (Twenty two millimetre) on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (One cement : six sand) as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10mm (Ten millimetres) thick full body charged polished/ antiskid water proof stain and impact resistant heavy duty vitrified tiles Orient/ Kazaria/ Nitco, Somany, Rak, Johnson & Johnson 600x600mm (Six hundred into six hundred millimetres) manufactured of approved shade and colour in flooring, tread of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three course sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete in pattern finish upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 10mm ( ten millimetre) thick Full body charged antiskid, water proof stain and impact resistant heavy duty vitrified tiles of Orient/ Kazaria/ Nitco, Somany, Rak, Johnson & Johnson 600x600 ( six hundred into six hundred millimetre) manufactured of approved shade and colour in risers of steps, skirting and dado laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete in pattren finish,colour and shade as approved by Engineer -in- charge upto all floor level in all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing rectified HD series Digital glazed ceramic tiles 8mm (Eight millimetres) thick in flooring, 300x300mm/ 400x400mm (Three hundred into three hundred milimetre oblique four hundred into four hundred millimetre) size non slipry Orient/ Kazaria/ Nitco, Somany, Rak, Johnson & Johnson make in pattern finish in flooring, treads of steps laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : three course sand) finished with flush pointing in white cement upto all floor levels in all heights complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Digital Glazed HD series rectifed ceramic tiles of size 600x300mm x 8mm (Six hundred into three hundrede into eight millimetre) thick of Orient/ Kazaria/ Nitco, Somany, Rak, Johnson & Johnson make in pattern finish in skirting, risers of steps and dado 12mm (Twelve millimetre) , cement mortar 1:3 (One cement : three course sand) and jointed with flush pointing with white cement mixed with matching pigment complete upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Repair of Plaster in Patches of 2.50 Sqm (Two point five zero square metre) and under and 10mm to 15mm(Ten to fifteen millimetres) thick including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground with in a all leads with Cement Mortar1:3 (one cement:three sand) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (One cement : six course sand) upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying Birla white wall care putty with two or more coats to achieve average thickness of 1mm ( one milimetre ) over plastered surfaces after thoroughly brushing the surface free from mortar dropping, dust, loose materials and other foreign matter course sand papered smooth to give fine finish to the surface complete upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 4mm (four millimeter) thick plain AC sheet ceiling of approved quality with butt jointing and cover fillet wood screws including beading (frame work and cover fillets to be measured and paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.

Distempering on old work with one or more additional coats as required to give smooth finish and even shade with oil bound washable distemper of approved brand and manufacture (Asian/ Nerolac/ICI Dulux) and of required shade on decorated wall surface after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for every subsequent coat of Distempering with oil bound washable distemper of approved brand and manufacture and of required shade complete including entire carriage of materials in all leads and lifts as per direction of Engineer-in-Charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Fosroc, Cico, Pidilite, Inpermo, Sika) on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including course sand papered smooth complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting with one or more additional coats as required (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint (Asian/Nerolac/ICI Dulux ) to given an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with enamel paint of approved colour including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for every subsequent coat of Painting enamel paint ( Asian/Nerolac/ ICI Dulex) of approved brand and manufacture and of required shade complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting one or more additional coat as required (excluding priming coat) on previously painted steel and other metal surfaces with white readymixed paint (Asian Make) to given an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with white enamel paint including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for every subsequent coat of Painting readymixed paint ( Asian make) of approved brand and manufacture and of required shade complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetres) thick water proof commercial board (Kitply/Green Ply/Century ply/ Action Tissa make ) in shelves/box for cup board with butt joints and fixing with nails and screws etcetra complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing wood work of Second class deodar wood in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws complete in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 4mm (four millimetre) thickness glass panes with putty and nails including removal of broken glass panes whereever required complete in all respect including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen millimetre) nominal size anodized/ powder coated aluminium make of Hindalco, Jindal, Indian Aluminium Co. sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) makes of Hindaco, Jindal, Indian Aluminum Co. anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads, lifts, drawings, technical specifications and the direction of Engineer-in-Charge other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

300x16mm (Two hundred into ten millimetre) nominal size.

200x10mm (Two hundred into ten millimetre) nominal size.

Providing and fixing aluminium handles makes of Hindaco, Jindal, Indian Aluminum Co. anodized/ powder coated transparent including entire carriage of materials in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

125mm (One hundred twenty five millimetre)

100mm (One hundred millimetre)

Providing and fixing oxidized mild steel hooks and eyes 150mm (One hundred fifty millimeters) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing double action hydraulic door spring of approved brand (Universal or its equivalent approved by the Enginner-in-Charge ) and manufacture conforming to IS 6315 for aluminum door including cost of cutting and floor as required embedding in floor and cover plate complete in all respect including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point sixty six to two millimetres) thick of TATA/Dura Shine make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in super structure including raking out joints in cement mortar 1:5 ( one cement: five coarse sand ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.

Steel work welded in built up sections (TATA/JINDAL/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In grating,frames, framed guard bars, ladders, railings, brackets and similar works including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

WATER SUPPLY AND SANITARY INSTALLATION

Providing and fixing viterous china water closet squatting pen (Indian Type W.C. pan size 580 mm ( five hundred eighty millimetre) (Earth Work, bed concrete foot rest and trap to be measured and paid for separately (Orrissa Pattern) Jaquar/ hindware /cera (58x43) ( ffity eight into forty three) Snow White Shade including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10.00/12.50/15.00 litres vitreous china low level flushing cistern a makes of Parryware, Hindware, Sanitary work, Neycer, Cera with a pair of C.I. or mild steel brackets complete with fitting such as lead valve less syphon 15mm (Fifteen millimetre) nominal size brass ball valve with polythene float CP brass handle, union and caplings for connection with inlet, outlet and over flow pipes 40mm (Forty millimetre) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (Over flow pipe to be measured and paid for separately) including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 550mmx400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin Cera / Hindware/ Parryware, Nycer, Sanitary work make with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings complete in all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china pedestal of Cera/Hindware/Parryware, Sanitary work, Neycer for wash basin complete recessed at the back for the reception of pipes and fittings within all leads, lifts as directed by Engineer-in-Charge including entire carriage of material with in all leads, lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimeters) dia of approved make PVC waste pipe for wash basin or sink including brass check nut of Finolex in Hindware/ Parryware make complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimeters) dia of approved make lead waste pipe for wash basin or sink including brass check nut Cera/Hindware Parryware make complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetre) bevelled edge mirror (Atul/Guard/Golden Fish/Modi make ) of superior glass mounted on 6mm (Six millimetre) thick Asbestos cement sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel rail 600mm ( six hundred millimetre) long of Jaqaur /Hindware/ Parryware complete with CP brass brackets fixed to wooden plugs with CP brass screws including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm x120mm (Six hundred into one hundred twenty millimetre) glass shelf Jaquar/ Hindware/Parryware make approved by Engineer-in-Charge with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of Seiko, Kingston, Gem, Parko, Techno Jal with CP brass brackets fixed to wooden cleats with CP brass screws etcetera complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass bib tap with capstan head 15mm (Fifteen millimetre) dia of Jaquar /Hindware/Parryware complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP Brass pillar tap with capstan head 15mm (Fifteen millimetre) dia of Jaquar /Hindware/Parryware complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. stop cocks quater turn15mm (Fifteen millimetres) dia of Jaquar / Hindware/ Parryware including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC connections pipe with brass unions 45cm (Forty five centimetres) length 15 mm (Fifteen millimetre) nominal bore heavy duty Finolex/Supreme make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal dia brass full way valve with wheel (heavy duty) of approved Jindal/ Tata/Zoloto make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 90 mm(Ninety millimetres) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm(One Hundred ten millimetres) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 90mm (Ninety millimetres) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC plain bends complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 90mm (Ninety millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ Supreme pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centimetre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110x75mm ( One hundered ten into seventy five millimeters) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with course sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level/heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing lead caulked joints 90mm (Ninety millimetre) nominal size dia meter cast (spun iron) pipes and fittings including testing of joints and including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing lead caulked joints 110mm (One hundred millimeter) nominal size dia meter cast (spun iron) pipes and fittings including testing of joints and including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten milimetre ) dia Chromium Plated grating of superior quality for floor, gully or nahani trap make of Kingston, Gem, Parko, Techno, Jaguar, Seiko, Jal including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing jet with 1.50 mtr. ( one point five meter ) long flexible tube 8mm (eight milimeter ) dia chrom finish with wall hook complete hard shower ( Health faucet ) ALD-597 of Jaguar/Hindware/Parryware and approved by Engineer-in-Charge including entire carriage of material with in all leads, lifts, technical specifications as per the direction by Engineer-in-Charge other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of Sintex or equivalent make (I.S.I. marked tripple layer) 1000 (One thousand) litre capacity with 40mm (Forty millimetres) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetres nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore to wall, ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty millimetre) nominal bore to wall, ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Surjeet Kumar

SURESH THAKUR GOV CONT

SUNIL KUMAR THAKUR

M/s Joginder Kumar