ADDN/ALTN/IMPROVEMENT OF CERTAIN MAP QTRS IN OLD PINTO PARK AT AF STATION PALAM

Amount

Taking down chowkhat or frame n exc. 1.5 sqm each but with shutters without taking off shutter from the frame complete all as specified and directed.

All as per item No 1 here-in-before but exceeding 1.5 Sqm but not exc 4.00 Sqm.

Dismantling of brick tiles as in roof up to 4th storey of bldgs complete all as specified and directed.

M&L for 40mm thick brick tiles laid on and including bedded in 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

M&L for rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides, BWR grade complete all as specified and directed.

M&L for 2nd class hard wood factory made as in 35 mm thick glazed and skeleton shutters open rebated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and directed.

S&F window/Ventilator section of frame 72 x 55 mm fixed to wall or concrete surface with MS hold fast (30 x 5 mm section) 150 mm long made of galvanized steel powder coated and section of shutter 47 x 20 mm, mullion section 72 x 50 mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60 mm including powder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.

S&F for 300mm long Aluminium anodised sliding door bolt with bright bolt not less than 16 mm dia including minimum of 06 bolts & nuts four Nos on bolt plate and two Nos on staple plate complete all as specified and directed. Note : Nuts shall be tightened on MS screws.

S&F 150mm long aluminium handle complete all as specified and directed.

M&L preparation of new or previously surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.and directed.

Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 4th storey complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 made out of 5 mm single side prelam PVC sheet and edge will be painted to match with prelam sheet, reinforced with MS square tube, supplying and fixing in opening as per Specification and drawing complete all as specified and directed.

S&F factory made panel PVC door shutter 30 mm thick, (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel have in a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and 10 mm thick prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap inserted for top rail & bottom rail panelling of 10 mm thick pre-lam PVC sheet fitted in the MS frame welded/sealed to the stiles Y rails with suitable 10 mm thick pre-lam PVC sheet and have one side feather edge and another side 10 mm 90 degree bent edges complete all as specified and as per Drawing and specification complete all as specified and directed.

S&F aluminium handles cast type 100 mm size anodized and fixed complete all as specified and directed.

S&F MS butt hinge ISI Marked 100 mm size complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts 150 mm in length of extruded section and fixed complete all as specified and directed.

M&L for single cutting grinding and polishing of existing mosaic/terrazo flooring complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10 mm thick rendering on Internal surface in cement mortar 1:6 on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on external surface in cement mortar 1:4 on brick masonry walls finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on concrete surfaces as in ceiling (circular or any radius or plan surfaces) finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed.

M&L for rough coloured cast plaster in cement mortar 1:3 on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer including applying chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces as in ceiling and applying two coats of white wash complete all as specified and directed.

Dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing), removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7mm to 8mm thick (square or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18 sqm, in floors etc. set and jointed in grey cement and pointed in white or colour cement to match the surfaces over & including 15mm thick screed bed in cement mortar 1:6 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 350 x 250 x 7 mm/450x300x7mm thick set and jointed in grey cement and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F in repair PVC waste pipe 25mm dia suitable for waste coupling 32mm & 40mm dia, 600mm long complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair, PVC low level flushing cistern complete with syphon, handle lever, float valve and PVC bend including connecting to ITWC/ETWC and fixing on walls with brackets complete all as directed. MAKE: PARRYWARE/Hindware/PRAYAG.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts and seat cover white, P or S trap, excluding flushing cistern and flush pipe complete all as specified.

S&F in repair wash hand basin, vitreous china, flat back 550x400mm size, white including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, pair of brackets of mild steel 35 x 35 x 6mm size including one CP pillar tap, cast copper alloy 15mm bore,one brass stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and directed.Make:Cera/Hindware/Parryware for WHB, Jaquar/CERA/PRAYAG for Pillar tap & Stop valve and PARRYWARE/Hindware/PRAYAG for PVC Connection.

S&F Jet spray, CP complete all as specified and directed. Cat No BEA-40, Make : Prayag or equivalent in Polytuf or Pearl

Taking down PVC rain water pipe of any dia up to 4 story building complete all as specified and directed.

S&F 110mm dia, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and directed.

All as per item No No 40 here-in-before but 75 mm dia.

S&F PVC (SWR) bends, 110mm dia fixed to PVC pipes complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal, 110mm dia fixed to PVC pipes complete all as specified and directed.

Taking up or down steel tubing 15 mm dia, and connections, including cleaning for re-fixing or removal to store as in walls, ceiling and floors etc. complete all as specified and directed.

All as per item No. 44 here-in-before but but 20 mm dia.

S&F GI tubing, 15 mm bore, medium grade with all fittings and fixed complete to walls and ceiling or concealed to walls or ceiling or in short length complete all as specified and directed.

All as per item No 46 here-in-before but but 20 mm dia.

S&F in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and directed.

S&F in repairs bib cock with flange, chromium plated, fancy type, 15 mm dia, screwed down, screws for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make Cat No 8306 PRAYAG or equivalent in JAINKO/CERA/SHAKTI

Supply and fixing in repairs stop valves, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make Make Cat No 8326 PRAYAG or equivalent in JAINKO/CERA/SHAKTI

S&F in repairs ball brass valves, 20 mm bore dia, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repairs swivel shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40 gms) complete all as specified and as directed.Make : JAINKO/ SOMANY/ PRAYAG

S&F in repairs grating PTMT 100 mm dia (minimum weight 25 gms)complete all as specified and as directed.

S&F in repairs Grating PTMT 125 mm dia (minimum weight 40 gms) with waste holes complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thick above or below ground level complete all as specified and as directed

M&L, 25 mm thick PCC 1:2:4 using 20 mm graded stone aggregate over filling of sunken floors over a layer of polyethylene film black 50 micron over a layer of bitumen cutback (85/25) grade applied hot (1.5 Kg/sqm) over 10mm thick plaster in cement mortar 1:3 with WPC @ 3% by wt. of cement including filling of brick aggregate complete all as specified and directed. Note :Brick aggregates shall be measured and paid separately under srl item no 78 of this schedule.

S&F in repairs, cast iron nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) using 12.5mm graded stone aggregate complete all as specified and directed.

S&F in repairs, 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one meter of interval with cement joints fixed to wall complete all as specified and directed.

S&F in repairs, 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one meter of interval complete all as specified and directed.

S&F in repairs100mm double branch piece cast iron complete all as specified and as directed

S&F in repairs 75mm double branch piece cast iron complete all as specified and as directed

S&F in repairs cast iron cowls 75 mm size complete all as specified and directed.

S&F in repairs salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover 150 x 150 mm complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings, 40 mm dia, and fixed as in sunken complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing and efflorescent salts and applying two coats of distemper oil emulsion up to 4th floor complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces on ceiling including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description n.exc 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc, filling in cavities and cracks etc. with approved filler and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F 25mm dia powder coated finish drapery rod including fancy type brackets and knob and ring complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer of same brand (APEX) of Asian brand or equivalent in Acro paints or Berger on external surfaces complete all as specified and directed.

M&L for preparation of surface using necessary filling compound of Altek putty to obtain smooth regular/even finish using sand paper and applying one two of exterior emulsion paint over a coat of primer of same brand (APEX) of Asian brand or equivalent in Acro paints or Berger on external surfaces complete all as specified and directed.

S & F in repair prelaminated particle board of 19 mm thickness, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc complete all as specified and directed.

M&L for 75 mm thick cement concrete type C1, 1:3:6 (using 20 mm graded aggregate) as in plinth protections, to be finished even and smooth without using extra cement including use of necessary form work complete all as specified and directed.

S&F stainless steel plate rack of overall size 600mmx900mm and weight not less than 6 Kgs as approved complete all as specified and directed.

S&F in repair 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),three layer, hoisted and fixed in position complete all as specified and directed.

Supply of broken bricks aggregate 40mm size as in filling in sunken floor complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified and directed.

Taking down unserviceable sub main wiring with conduits/battens etc complete all as specified and as directed.

Taking down unserviceable LT panel board including taking down existing electric energy meters fitted for Panel complete all as specified and directed.

M&L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories in concealed wiring system including necessary cutting, chasing and making good the disturbed surface of wall including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete all as specified and directed for the followings.

One socket outlet 5 Amp controlled by one switch on independent board

One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete

All as per Srl item No. 81 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sqmm stranded copper conductor cable PVC insulated including earth wire 2.5 Sqmm copper conductor cable connected to earth dolly complete all as specified and directed..

M&L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in existing conduit including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly and making good the disturbed surface of wall complete all as specified and directed for the followings.

One light point controlled by one switch one way

One fan/exhaust fan point controlled by one switch.

One socket outlet 5 Amp controlled by one switch on independent board

One 3 pin 5Amps socket out let point on the same board controlled by one switch

One bell point controlled by one bell push 5 Amps

All as per srl item No.83 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sqmm stranded copper conductor cable PVC insulated including earth wire 2.5 Sqmm copper conductor cable connected to earth dolly.

Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 3 terminals complete all as specified and as directed.

Supply and fixing of electric ding dong bell, 230 volt AC, single pole complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing of stepped fan regulator 300 watt, 230 volts, 50 HZ, AC. complete all as specified and as directed.

Supply and fixing of switch piano flush type 5 Amps, single pole one way complete all as specified and as directed.

Supply and fixing of socket out let 3 pin 5 Amps, flush type complete all as specified and as directed.

S&F of switch piano flush type single pole one way15 Amps complete all as specified and as directed.

Supply and fixing of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and as directed.

Supply and fixing of flush type bell push, 5 Amps complete all as specified and as directed.

Supply and fixing of switch piano flush type 5 Amps, two ways complete all as specified and as directed.

S&F indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, complete with driver and all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

Supply and fixing of LED bulb 7 watts B22 base fixed in pendent holder /bulk head complete all as specified and as directed.

S&F indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body complete with driver and all accessories internally pre wired and including connecting up with twin core copper conductor cable complete all as specified and as directed.

Supply and fixing of vertical type load line distribution board, double door, 6 ways, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail suitable for accommodating MCCB 100/125 Amp, 16KA, 4 Pole as incomer complete all as specified and as directed.

Supply and fixing for MCCB, 4 pole 100A, 16KA, 415 Volts with thermal magnetic protection unit including making necessary electrical connections complete all as specified and as directed.

Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'C' curve MCB of SPN and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve MCB of single pole and current carrying capacity 6 to 32 A, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve MCB of single pole and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing of SPN encIosure 240 VoIts with two pin and earth pIug and socket compIete with one singIe poIe MCB of 10 Amps rating complete all as specified and as directed.

M&L for sub main wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25 mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and as directed.

S&F of LED bldg light highly efficient high power 40 Watt with powder coated pressure die cast aluminium with heat resistance toughened glass lens with internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete all as specified and as directed.

S&F GI pipe light grade 40mm dia bracket not less than 1.5 m long and bent to shape for fixing of street lights incl 02 Nos MS clamps made out of 25x6 mm MS flat incl 04 Nos fully threaded bolts and nuts fixing on wall etc. complete all as specified and as directed..

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in cement mortar 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2020) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed.

Re-fixing of electric energy meter complete all as specified and as directed by Engr-in-Charge.

S&F of thermoplastic (Polycarbonate/Polystyrene) meter box, suitable for single phase electric energy meter, IP66 as per IEC 60529 , corrosion proof, with lid screws made of stainless steel V2A, internally embedded gasket for lid and enclosures, metric size knock outs for cable entry from top and bottom with transparent hinged lid. Meter box should be able to adapt any make of din mountable equipment and tested as per as IEC 60439-3, fit for the new standard IEC 60 364-4-41, glow wire test IEC 695-2-11: 750C, flame retardant , self -extinguishing protection against mechanical load IK 08 (5 Joule) in accordance with IEC 62262 and enclosure dimension should be 217x253x115mm (LxBxH) complete all as specified and as directed.

Taking down carefuIIy water heater storage type, eIectric, capacity 25 Iitres carefully and depositing to the MES store and refixing the same after completion of B/R work complete all as specified and as directed.

Taking down ceiling fans/exhaust fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and refixing after cleaning complete all as specified and directed.

Shiv Shankar Nirman Co.

M/S Chhavi Constructions Co

SHEELSONS ENTERPRISES