Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹5.7 L
Closing Date
25 Aug 2021, 4:00 pmClosed
Executive Engineer
SDA office complex at Bemina SrinagarA
Face lifting/Renovation of Sangarmall City Centre at M A Road Srinagar including 2 Guard Rooms Kiosks.
2021_HAUDD_133040_3
e-tender Notice No 02 /EE of 2021
Open Tender
Civil Works
Item Wise
90 days
Lalchowk M A Road
Face lifting/Renovation of Sangarmall City Centre at M A Road Srinagar including 2 Guard Rooms Kiosks.
3 documents required · 3 mandatory
₹500
Yes
Convener, purchase committee, Directorate of ISM
Exempted
10 Sept 2021
4 Aug 2021
27 Aug 2021
5 Aug 2021
25 Aug 2021
12 Aug 2021
Amount
Providing, hosting and fixing trusses/purlins/rafters/ posts/ post plates or like components including cost of screws etc complete. 1st class budloo wood.
Providing and fixing of track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020 mm cover width 28-35 high crests at 250-255 mm TCT ( total coated thickness) high tensile SMP Galvalume Steel, including ridges and valleys of same material all complete.
Providing and fixing of wooden weather boarding 25mm thick on the outer side of walls including fixing with nails all complete (Ist Class Budloo Wood)
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, including panelling and 3.5mm thick glass panes with wooden beading, all complete as per direction of Engineer-in-charge. (Ist Class Kail Wood) 35mm thick
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing/fixing of 10-12mm thick timber T&G plank penalling (imported timber) free from crackes, fixed on 12mm thick wate proof plywood sheet duly levelled fixing of board on budloo frame of 1 ½” x 2" width 2'-0" c/c as required including making necessary holes, filling of putty in plywood gaps including Frerch spirit polished complete job.
Providing and fixing of Eaves boarding of size 250x32mm thick 2nd class kail wood.
Painting on wood work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved wood primer
Providing and fixing of lighting points in 1.5mm square CU wire with FR Insulation duly recessed in walls, ceiling / passing through conduits including cost of 5 Amp switches all complete.
Providing and fixing of heating points in 2.5 mm square Multi strand CU wire with FR Insulation duly recessed in walls, ceiling / passing through conduits all complete.
Providing and fixing of G.I pipes complete with G.I fittings and clamps including cutting and making good the walls etc. internal work exposed on wall. a) 15mm dia. Nominal bore
b) 40mm dia. Nominal bore
Providing and fixing C.P. tubes/ Connections. 15mm nominal bore
Providing and fixing PVC Waste Pipes
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
Providing and fixing of Hot Water geyser of approved brand and manufacture including all fittings and fixing on wall all complete. (50 ltr capacity, Racold make).
Provision for repairs of Mild. Steel gates, including the splitting of sliding gates into two separate leaves. Fixing of posts, hinges and all necessary fittings and fixtures to make the gates fully functional.
Painting on Steel work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (two or more coats) all complete.
M/S MOHSIN MAJEED
M/S AIJAZ AHMED MIR
Shaheen Ahmad Wani
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .