Karnataka

Active

Works

Roads

Improvements to road from Bidarkundi to Kuntoji Approch Road in Muddebihal taluka of Vijayapur Dist (KM 0.00 to 2.00) VR No 281 (2025-26 CMIDP Grant) (For SC Bidders)

Rural Development and Panchayat Raj Department

RDPR Division Office Vijayapura | Vijayapura, Karnataka

Amount: ₹62.5 LCloses: 7 Aug 2026

Timeline

Published23 Jul 2026
Closes7 Aug 2026
Bid Opening10 Aug 2026

Tender Value

₹62.5 L

EMD Value

₹62,600

Closing Date

7 Aug 2026, 11:00 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

VIDYADHAR NYAMAGOND EE

Mobile Number

8904951250

Work Description

Improvements to road from Bidarkundi to Kuntoji Approch Road in Muddebihal taluka of Vijayapur Dist (KM 0.00 to 2.00) VR No 281 (2025-26 CMIDP Grant) (For SC Bidders)

Tender Information

Tender ID

RDPR/2026-27/RD/WORK_INDENT27349

Reference Number

RDPR/2026-27/RD/WORK_INDENT27349

Tender Type

Reserved

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredValid KPWD Registration Certification

RequiredTendere Must Submit PAN & GST Certificate

RequiredTo quality for award of this contant each tenderer in his name should have in the 2021-22 to 2025-26 years period achieved in at least two financial years an average finance turnover of Rs 62.55 lakhs usually not less than amount put to tender from CA on letter Head with UDIN No otherwise bid will be directly disqualified

RequiredWork Order / Commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredTenderer must have of value 2021-22, 2022-23, 2023-24, 2024-25 to 2025-26 satisfactory completed as a prime contractor at least one any Work of 25PERCENT of the Amount Put to Tender. Not less than Rs 15.64 lakhs issued by the officer not below tha rank of Executive Engineer Work Done certificate with Work Indent No is Mandatory

RequiredAccurate postal address and Phone / cell Number

RequiredTender who meet the above specified minimum qualifying will only be qualified if there available tender capacity is more than the total tinder value the web available tender capacity will be calculated as under associated available tender capacity A X N X 2.50 - B

RequiredSC Reserved Category Certificate as per KW-1 format

RequiredUnconditional LIQUID ASSETS AND OR AVAILABILITY OF CREDIT FACILITIES OF NOT LESS THAN 30 PERCENT OF THE AMOUNT OF CONTRACT THE VALUE SHOULD NOT LESS THAN RS 18.76 LAKHS

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs. 62.55 lakhs (usually not less than the estimated cost under this contract

In last five years (i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26) Satisfactorily completed as a prime contractor for at least one similar nature of work done 25% of the cost of the work i.e., not less than the amount Rs 15.64 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor. (With Work Indent Number).

Liquid assets and /or availability of credit facilities of not less than Rs 18.76 lakhs (30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 % quantities of work in last five years. 1 Excavation / Embankment / Earthen Shoulder 1500.12 Cum 2 GSB 225.00 Cum 3 WBM/WMM 253.13 Cum 4 Asphalting 1687.50 Sqm 5 PCC/RCC 55.20 Cum

EMD may be paid fully by E-payment Rs. 62,600/-

Total value of civil engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Any damage during the progress of work, the damage cost should be beared by the contractor

Any addition / Ommission / alteration will be reserved by the under signed

Tender processing fee will not be refundable or exchangeable in case of cancellation of tender

Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC/ BG (NSC should be fledge in the name of Executive Engineer)

Acceptence / Cancellation of the tenders are reserved by under signed without any reasons for the same

The work should be carried out in accordance with the standard specifications specified by the department. The defect liability period for all these works shall not be less than 1 year & the contrator shall have to give guarantee for 1 year maintanance

The rates quoted by contractor shall include for structural design & drawing duly certified by the competent authority. The Tenderer whose tender is accepted shall furnish withing 15 days the structural design & drawings in 3 sets for scrutining to the competent authority. The contractor shall furnish 3 sets of design & drawings (approved) to the Engineer-in-charge and keep one set at site of work. The safe bearing capacity shall be got tested before submission of the drawings.

If the rates quoted by the Contractor is lesser than the amount put to tender, the difference cost should be paid by the contractor, through DD / FDR / NSC/ BG in the favour of Executive Engineer at the time of Agreement

The Contractor shall quote the rates without adding GST for either materials or works contract Service. GST payable by the Contractor under this works contract will be paid to the contractor seperately over the contractors bid amount as per Govt order No PWD 65 RDF 2017, Dated:11-10-2018

Contractor should obey with the above conditions in addition to the KW-3

Bidders shall ensure upload of relevant document certifying his/her status as reserved category (SC) as prescribed in the tender document.

Contractor should upload KPWD renewal registration copy.

The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

Period of completion 6 Months including Monsoon

Calculation sheet of Bidder Capacity AxNX2.5-B

Availability by owning, owning/ Hire/ Lease basis, Govt circular on GO-FD/AE 263/EXP12-2022, dated- 11-05-2022, this clause for owning key equipments for works costing upto Rs. 3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in constructions as per MORTH specification. 1) Self Loading Concrete Mixer 2) Water Tanker 3) Tractor with Tralee 4) Centering Materials

GST shall be paid to the tendered amount separately.

PWD Registration Certificate Class III and Above

Technical Criteria

Capabilities of Vendor

Audited CA Certificate of Annual Turnover

Work Done Certificate

Line of Credit

Work Done Certificate

EMD may be paid fully by E-payment Rs. 62,600/-

Others -- EMD may be paid fully by E-payment Rs. 62,600/-

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Banker Details for reference

Others -- Banker Details for reference

Bidders shall ensure upload of relevant document certifying his/her status as reserved category (SC) as prescribed in the tender document.

Others -- Bidders shall ensure upload of relevant document certifying his/her status as reserved category (SC) as prescribed in the tender document.

Contractor should upload KPWD renewal registration copy.

PWD Registration Certificate (Class I/II/III/IV)

The contractor should scan the GST Certificate, PAN card & Contact Phone No, Postal Address Details

PWD Registration Certificate (Class I/II/III/IV)

Calculation sheet of Bidder Capacity AxNX2.5-B

Others -- Calculation sheet of Bidder Capacity AxNX2.5-B

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,570

EMD Fee Amount

₹62,600

Important Dates

Last Activity

23 Jul 2026

Published

23 Jul 2026

Bid Opening

10 Aug 2026

Download Ends

6 Aug 2026

BOQ Preview

•

Sub Estimate for Road

•

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...

•

Surface Drains in soil Construction of unlined surface drains of average cross sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embank...

•

Compacting original ground Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankmen...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreadi...

•

Granular sub-base/base/surface course Granular Sub-base - Grading III Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor...

•

W B M Grading - II Water Bound Macadam Subbase/Base Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform t...

•

W B M Grading - III Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, ha...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of ...

•

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to required line, grade and level...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface.

•

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats with bituminous binder VG-30 Case - II : Type ...

•

Providing and Fixing 'Logo Board ' of PMGSY at Starting Point : Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly weld...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflector...

•

Kilometer stone : Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc Ordinary kilometer stone (precast)

•

Sub Estimate for 2 Rows CD - 2 Nos

•

Excavation for Structures Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, struttin...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and Laying Reinforced Cement ConcretePipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in...

•

Pitching on slopes Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specific...

•

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Boundary Pillars Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting

•

Sub Estimate for Single Row CD - 2 Nos

•

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i...

•

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Boundary Pillars Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting

•

Sub Estimate for Field CD - 5 Nos

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

27349 KW-3 SC 75 lakhs Road.doc

Tender Document • 1.09 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].