Providing and Fixing Aluminium Partition, Furniture, Cubicles, in the Ad Block for Second Floor in the PTU Campus under RUSA fund

Dark Room: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10' Height Aluminum Partition

Valuation Table: Supply & Fixing of Valuation Table of size 900mmx600mmx750mm top made up of 25mm thick prelaminated particle board duely edge banded with 2mm thick PVC Beeding bottom legs of size 1"x1" MS pipe duely powder coated after necessary treatment provided with 10mm thick divider plain glass(Glass Make - Saint Gobain) with D brackets.(D Brackets Make - Ebco)(PVC Beeding make - Rehau), (IS 12823: E1 & E2 quality Emission Classes : Standard EN 13986 Construction Formaldehyde Containing resins)

Supply of Visitor chair seat and back made up of Moulded cushion and frame made up of 16 gauge round oil Pipe duely powder coated after necessary treatment, provided with PU arms.Dimension W59cmxD59cmxH85cm

Examanination Wing Office Room - Dark room: Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10' Height Aluminum Partition

Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10' Height Aluminum Partition

Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 10' Height Aluminum Partition

Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 7' Height Aluminum Partition

Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 7' Height Aluminum Partition

Supply & Fixing of Aluminum Partition : Providing and Fixing powder coated Aluminium work for Doors Partions wall with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners for fixing of vertical sections in the ceiling to support the frame including necessary filling up of gaps at junctions, top, bottom and sides with required PVC/Neoprene felt, etc. Aluminum sections shall be smooth,rust free straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ panelling, C.P. Brass/Stainless Steel Screws all complete as per drawings and the direction of engineer -in-charge with powder coated aluminium section of 63.5mmx38.10mm (Section weight of the Aluminium section should not be less than 4Kg for the sectional lengh of 15') with 12mm Thick both side Pre-laminated flat pressed three layer of graded wood particle board conforming to IS:12823, Grade I Type II in panelling of partition walls or with float glass panes of 5mm thickness(Saint Gobin or equaivalent) panelling of required height complete in all respect including all hardware fittings(Including door closer) - 7' Height Aluminum Partition