REPAIR TO SWT STEEL GATE FENCING ROLLING SHUTTERS MISC BR WORKS AT AF STATION GWALIOR

Amount

Demolition of old cement concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 2.5 Km from the starting point. Complete all as directed.

M&L for 50 mm thick precast RCC Jali using cement concrete 1:2:4 mix, type B0 (using 12.50 mm graded stone aggregate) set in cement mortar 1:4 complete all as specified and directed.

M & L for cement concrete 1:2:4 (20mm graded stone aggregate ) type B-1 on roof kerbs and like rounded or chamferred on edges etc, complete all as specified.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level and removing the debris to a distance not exc 2.5 Km from the starting point. Complete all as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified.

M&L for 50mm thick cement concrete 1:2:4 type B-I using 20mm graded stone aggregates with water proofing compound as per manufacturers instructions finished even and smooth in floors. Complete all as specified. (Note :- WPC will be measured and paid separately under relevant item of BOQ)

Surface dressing not exc 15 cm deep in soft / loose soil complete all as speified.

Dismantling old posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground and remove materials from site of work. complete all as directed.

All as per sl item No. 8 hereinbefore but embedded on natural ground. Complete all as directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long, diameter of shank 5 to 10 mm complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F, is repairs galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified. (Note :- Each lines to be measured)

S&F for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. Complete all as specified.

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified.

Demolition of old brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and segregation serviceable bricks keep them stacking for re-use. Complete all as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc,complete all as specified.

All as per ser item No 17 hereinbefore but except brick built in Cement Mortar (1:4) complete all as specified. (Note:- Serviceable bricks shall be obtained from Srl item No 16 hereinbefore for re-use)

Taking down old cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc and remove rubbish from site of work.complete all as directed.

M&L for 15mm thick rendering in Cement Mortar 1:4 on fair faces of brick work or concrete surface finished fair & even without using extra cement complete al as specified.

All as per Srl item No 20 hereinbefore but in cement mortar 1:3 with water proofing compond as per manufacturers instructions. Complete all as specified. (Note :- WPC will be measured and paid separately under relevant item of BOQ)

Supply only water integral proofing compound (Powder type) complete all as specified and directed.

M&L, for scrapping the sides and base of S.W.T against all loose scales, minor vegetation and cleaning, rubbing down with water to remove dust etc. complete all as specified and directed.

M&L, for applying two coats of cement based paint to old surfaces of walls, base of S.W.Ts complete all as specified and directed.

M& L for preparation of new plastered wall surfaces and applying two coat of cement base paint over a coat of primer of same make on walls complete all as specified.

M&L for wire netting of galvanised steel wire 1.40 mm dia and size of mesh 25mm fixed with tinned tacks of complete all as specified and directed.

M& L for cutting out craks to v-section in existing wall, cleaning out, wetting, grouting with cement sand mortar 1:3 complete all as specified and directed.

S&F wire netting of stainless steel of 0.91 mm dia and 25 mm size of mesh fixed with tinned tacks of stainless steel complete all as specified and directed.

Taking out sludge including all foreign materials such as sand, grit, fibers, rages etc in semi liquid /solid form from the base of S.W.T after dewatering /emptying the S.W.T either manually or mechanically. Complete all as directed. (Note :-The sludge is to be disposed off to a distance n less than 1.5 Km from the starting point)

Pumping /bailing out water mixed with minor silt particles, scales and such like foreign material from static water tanks manually or mechanically and throwing it to open drains complete all as directed by Engineer-in-Charge.

Dismantling of old plain or corrugated Asbestos cement sheeting in roof coverings etc and remove materials from site of work . Complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provideded for etc and remove materials from site of work . Complete all as directed.

S&F rolled mild steel in joist, channel or tee sections fixed independently without connecting plates. Confirming to grade Fe-410. Complete all as specified.

S&F, rolled mild steel in main and cross beam, hip and jack rafters, purling where connected to common rafters with angle cleats. Confirming to grade Fe-410. Complete all as specified.

S&F in repair for HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified.

S&F in repair suspended false ceiling grid system of size 600 x 600 mm with main runner of size 32 x 24 x 0.8 mm, cross tee of size 26 x 24x 0.80 mm and wall angle of size 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified and directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

All as per Srl item No 37 hereinbefore but plain sheet as in ridges etc complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, apron etc laid and bedded in any mortar complete all as specified and directed.

M&L for Granite (of any type) work, 20 mm thick (Table rubbed and polished) and rounding or chamfering the exposed edges of granite as in steps, jambs, pillars, window cills, cooking plateforms and like set in cement mortar 1:4, including pointing in white cement 1:2, using marble dust with admixture of pigment to match with marble shade of Granite over and including 15mm thick rendering in cement mortar 1:4 complete all as specified.

S&F for mild steel framed work as in door or gates of angle or other section with gusset plates , rails braces etc complete drilled for fixing of steel sheeting or other covering confirming to grade Fe-410. Complete all as specified.

M &L for applying one coat of synthetic enamel paint to old steel surfaces of any description over 10 cm width or girth not otherwise described after preparation. Complete all as specified.

Repair / maintenance of existing manually operated rolling shutters of any size / description by repairing the small repairable parts of rolling shutters such as hood covers, guide channels, lock plate, riveting, bolting et including greasing the rolling shutters and making it functional to the entire satisfaction of Engineer -In-Charge.

All as per item No 43 hereinbefore but gear operated type including repair of gear box and gear box pipe. Complete all as directed.

Taking down rolling shutters of any description and any size for replacement of the below mentioned parts and refixing the same in the same opening after replacing the damaged parts and greasing the shutters. Complete all as directed. (Note :- The rate includes all small necessary allied works such as welding/ bolting/ riveting / punching/ sealing and like and fixing charges of the below mentioned items)

Supply only mild steel S.W.G spring for rolling shutters of wt not less than 2.50 Kg each

Supply only mild steel S.W.G spring for rolling shutters of wt not less than 5.50 Kg each.

Supply only 40mm dia mild steel medium weight pipe as in anchorage rods in single lengths.

Supply only 1.00 mm thick plain black sheet as in hood over and bent to required shape.

Supply only complete gear box with mild steel pipe of dia not less than 25mm

Supply only 50mm dia mild steel medium weight pipe as in anchorage rods in single length.

S&F for stainless steel plate rack of size 600x900x250mm made out of 0.80mm thick stainless steel sheet best quality fixed to wall with screws complete all as specified. (Make - Prayag/Bluestar/Nirali)

M&L for repairing of RCC Chajjas/Sunshades at any height & of size 1.20x0.50 to 1.50x0.50 (soffits, sides and top) with cement mortar 1:4 after taking down plaster of chajjas carefully including dubbing out coat in cement mortar 1:3 where ever required and providing groove to the soffit of chajjas including top of Chajjas are to be provided with extra PCC 1:2:4 type B-1 as coving and including three coats of white wash/ Ace paint / cement base paint to match with the existing specification are to be applying to Chajjas after the repair work is complete all as specified and directed.

M&L for preparation old plastered or unplastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of wall and applying one coat of exterioe emulsion paint (ACE paint from Asian paint or any other equivalent make as approved by GE) complete all as specified and directed.

Dismantling of fencing wire mesh,any type and remove from site of work,complete all as directed.

Supply only galvanised chain link fencing of size 100 x 100mm aperture and dia of wire of any size or type as approved by Engr-in -charge etc, complete all as specified. (Note :- (i) Fixing charges will be measured and paid separately under relevant item hereinafter. (ii) Weight of frame will be ascertained by the BOO before incorporation in work.)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified.

m/s vikash Engineers

YASH DEVELOPERS AND CONSTRUCTION COMPANY

Sunil Traders

RAVINDRA SALES

M/s Shubham Construction Co.

M/s Pal Construction

M/S DHARMENFRA SINGH TOMAR