Financial year 2025-26 under special repair and painting work of the inspection house in District Mahoba

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete DSR Vol-2 Code-13.88

Wall painting with premium acrylic emulsion paint, of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. DSR Vol-2 Code-13.83.2 Two coats

Finishing wall with textured exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including primingcoat of exterior primer @ 2.20kg /10 sqm DSR Vol-2 Code-13.45.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR Vol-2 Code-13.80

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR Vol-2 Code-13.62.1

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. DSR Vol-1 Code-22.6

12 mm cement plaster: DSR Vol-1 Code-13.1.1

Providing & fixing in position Phenol bonded Bamboo wood wall cladding at all height with planks of sizes 10 mm thick, minimum 1800 mm length and minimum 100 mm side, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height 40x15 mm placed at ends of each tile, The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40 kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The vanboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating all complete as per direction of the Engineer in-Charge. DSR Vol-2 Code-26.3 Wood Wall Clading

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR Vol-1 Code-15.23.1

1:2:4 (1 Cement : 2 coarse sand (Zone-III):derived from natural sources : 4 graded stone aggregate 20 mm nominal size stone aggregate derived from natural sources) DSR Vol-1 Code-4.1.3

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore DSR Vol-1 Code-18.49.1

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete.DSR Vol-1 Code-11.41.2

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR Vol-1 Code-17.7.3

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for DSR Vol-1 Code-18.48

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)DSR Vol-1 Code-14.5.1

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. 10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.DSR Vol-1 Code-10.29.1

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm as per DSR 2023 Code No 17.10.1.1

Providing and fixingwhite virteous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting , of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litre ), including seat ,cover, and cistern fittings, nuts,bolts and gasket etc complete. DSR 2023 V-2 Code No 17.78

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 Cement : 6 coarse sand) 6.3.2 With Modular bricks

Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shutteringfinishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).DSR 2023 V-1 Code No 5.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.Upto P.L/Ground Floor /First Floor /Terrace Floor as per DSR 2023 Code No-5.22.1

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frame,guard, bar, ladder, railing, brackets, gates, and similar work.as per DSR 1 2023 Code No-10.25.2

Providing Corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diamater with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overiapping of sheets complete (up to any pitch in horizontal/ Vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00 mm thick with zinc coating not less thean 275 gm/m2 DSR Vol-1 Code-12.1.1

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. as per DSR-1, 2023 Code No 10.16.1

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10mm dia double threaded 6.8 grade (yield strenght 480 N/mm2) counter sunk head, comprising of 10mm dia polyamide PA 6 grade sleeve, including drining of hole in frame, concrete/ masonry, et. as per directiln of Engineer-in-charge. DSR Vol-1 Code-10.27.5 (10x160mm)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. as per DSR-2, 2023 Code No 17.31

Construction of subgrade and earthen shoulder with approved material obtained from borrow pits with a lift up to 1.5 meter transporting to sites spreading grading to require slope and compaction to meet requirement of table 300.2 with a lead up to 1000 meter as per technical specification clause 303.1 (Carted soil)

Please Enable Macros to View BoQ information