PROVN OF SHED FOR GEN SET TRAIL ORS (09 NOS) AT 23 ARTY BDE SIG COY AT DIPATOLI MIL STN

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for hardcore of gauge exc 63mm & n.exc 100mm in size, deposited, spread and levelled in layer n.exc 150mm thick, watered and rammed to a true surface of broken stone or boulder laid in layers complete all as specified and as directed.

Excavation in post holes (or similar holes) each n. exc 0.5cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm in soft/loose soil complete all as specified and as directed.

M&L for 75 mm thick PCC type C1 (1:3:6), using 20mm graded stone aggregate as in plinth protection, surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for cement concrete type B-2, (1:2:4) (using 40mm graded stone aggregate) as in fixing of posts etc complete all as specified and as directed.

M&L for 100mm thick cement concrete type B-1, (1:2:4) (using 20mm graded stone aggregate) as in hardstanding etc. surface finished even and smooth without using extra cement with and including making impressions of expanded metal, while the concrete is green complete all as specified and as directed.

M&L for forming construction joints (Dummy) 65mm deep x 10mm wide filled with mixture of bitumen and sand complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layes n.exc 15cm, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for cement concrete (1:4:8) Type D2 (using 40mm graded stone aggregates) as in fundation filling and mass concrete complete all as specified and as directed.

M&L PCC type C-I (1:3:6) (using 20mm graded stone aggregates) as in coping and similar works including weathering, slightly rounded or chamfered angels and throating complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 complete all as specified and as directed.

S&F pre painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410 -W (Gde-E- 250) quality A complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces complete all as specified and as directed.

M&L for brick work in CM (1:6) with sub class 'B' bricks straight or curved exc 6m mean radius complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep in soft/loose soil & getting out complete all as specified and as directed.

Removing excavated material (soil) n.exc 50 m and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in trenches including spreading, leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on concrete/brick surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for three coats white wash after preparation of newly plastered surface of wall complete all as specified and as directed.

M&L for point wiring with 2x1.5 Sqmm single core PVC insulated unsheathed copper multi stranded conductor (Phase-Red Colour and Neutral- Black Colour) in and including concealed PVC conduit of size 20mm for incomer circuit and 25 mm for out going circuit marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3mm thick sheet cover of suitable size complete including PVC insulated stranded copper conductor 1.5 Sqmm as earth wire (green colour) to common earth dolly for connection to ceiling rose to earth terminal including cutting chasses and making good distrubed surface to match with existing finish with plaster for One light/Fan point controlled by one one way switch complete all as specified and as directed.

Description all as per ser item No.21 here-in-before but for one 3 pin socket outlet 5 Amps on the same board complete all as specified and as directed.

Description all as per ser item No.21 here-in-before but for one 3 pin socket outlet 5 Amps on the independent board complete all as specified and as directed.

Description all as per ser item No. 21 here-in-before but for point wiring with 2.5 Sqmm for 15 Amp socket out let with 2.5 sqmm earth continutiy complete all as specified and as directed.

S&F switch piano type single pole 5 amp 230 v complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 Pin, 5 amp complete all as specified and as directed.

S&F switch piano type single pole 15 amp 230 v complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 Pin, 5 and 15 amp complete all as specified and as directed.

S&F ceiling rose surface type bakelite (65x50) mm three terminals complete all as specified and as directed.

S&F LED tube light fitting 1x20 watt 230 Volt housing extruded aluminium heat sink, complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surface including fixing material/accessories complete all as specified and as directed.

S&F MCB SP 240 volt 6 to 32 Amps 'C' series 10 KA complete all as specified and directed.

S&F MCB DP 40 Amps 'C' Series 10 KA complete all as specified and directed.

Earthing complete with GI earth plate electrode 60cm x 60cm x 6mm buried directly in ground vertically to depth not less than 2.25mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth wire of size 4.00 mm dia by means of nuts, bolts, check nuts, & washers made out galvanised iron or steel earth wire protected by galvanised iron pipe 20mm bore (medium grade) and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cm x 30cm x 10cm with one handle for lifting made out of 8mm dia MS bar, funnel wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 3 of MES Sch Pt-I all as specified and directed.

Supply, laying in trench/on walls as per site requirement, jointing, testing and commissioning with XLPE insulated, armourred, heavey duty, PVC sheathed electric cable with aluminum conductor, 1100 volts grade connecting to with new cable aluminium lug and cable glands of cross sectional area 16 sqmm 2 core complete all as specified and as directed.

M&L for sand filling in cable trenches for cable protection with clean dry sand unwashed incl gently punning, complete all as specified and as directed.

M&L for bricks sub class 'B' kiln burnt, well burnt, laid as in trenches/cable cover/protection complete all as specified and as directed.

S&F LED security light/street ligth fitting 35/36 watt with and including suitable size of GI bracket with clamp nut bolts, aluminium pressure die cast housing with touched glass cover (IP 66 protection) luminaire with high power LED as light source complete all as specified and as directed.

Supply and laying under roads, under culverts along poles light of GI pipe 40mm bore dia with all fittings as in cable protection complete all as specified and directed at site.

Boring of holes under road/hard standing or any other situation by manual mean for passing GI pipe 40mm bore grade and making good both the ends complete all as specified and directed.

M/s Kundu Enterprises

Modernage Constructions Pvt. Ltd.

RAMRAS BUILDERS

universal enterprises

MS HARI MOHAN GUPTA

M/s Kamleshwar Singh

Delhi Enterprises

M/s R R MUKHERJEE & CO