REPAIR / MAINT / REPLACEMENT OF UPS, OT LIGHTS STABILIZERS OIL FIRED BOILER FIRE ALARM SYSTEM MECHANICAL LAUNDRY AND ALLIED WORKS AT 7 AFH KANPUR

Amount

M&L for disconnecting electric cable connection of OT Light and taking down care fully for necessary repair of minor u/s parts, checking serviceability of wiring circuits, removing of faults of circuits and refixing and testing after repair complete all as specified & directed.

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M&L for one coat of aluminium painting with synthetic enamel paint of all outer side of oil fired boiler including pipe line and chimney (incinerator) etc after preparation of old surface of oil fired boiler complete all as specified and directed.

M&L for replacement of u/s spare parts for smooth functioning of Boiler of Make Thermax, Model No RXA06 complete all as specified and directed.

Metallic Hose Pipe

Oil Filter

Burner along with burner rod

Optimiser

De-scaling / Anti scaling compound.

Refractory assembly with jacket

Photo cell along with packing

Sequence Controller

Temperature Controller

Safety / Stop / Check Valve

Solenoid Coil

Fuel pump along with motor

Economisor

Ignition Electrode

Ignition Transformer

S&F in replacement of MCCB of rating 200 Amps 36 KA, 4 Pole, 415V including lugs, nuts, bolts, washers, spacers, studs, links etc. testing and commissioning complete all as specified and directed.

All as per Item No. 05 above but MCCB of rating 160 Amps 25 KA, 4 Pole, 415V

All as per Item No. 05 above but MCCB of rating 125 Amps 25 KA, 4 Pole, 415V

All as per Item No. 05 above but MCCB of rating 63 Amps 25 KA, 4 Pole, 415V

S&F in replacement of Contactor of rating 100-125 Amps making proper connection with suitable lug complete all as specified and directed.

S&F in replacement of Single Phase Preventer complete all as specified and directed.

Attending of complaints related to leakage in water GI/DI/CI pipe lines including all type of complaints received from the concerned JE E/M / Engr-in-charge / Complaint cell with necessary T & P and manpower including new fittings i.e. elbow, tee, reducer, union, long screw socket, nipple, plug etc. complete all as specified & directed. Note : The complaint shall be attended and defect shall be rectified with in 04 hrs commencing from the date and time of notifying the complaint failing which a penalty @ Rs 200 per complaint per day shall be recovered from contractor's payment.

M&L for de-scaling and servicing of oil fired boiler, servicing of fire burner (primary chamber), econimizer etc. by providing high skilled technician / mechanic having experience of oil fired boiler complete service and unserviceable part of fire burner with diesel supply pump, fuel supply, electric supply and other connected minor unserviceable parts to be change and complete alll as specified and directed. Note: Chemical required for decaling of boiler shall be deemed to be included in the rate quoted by the contractor. No extra payment shall be made for chemical/manpower to the contractor. Descaling shall be done on quarterly basis or as directed at site.

M&L for carrying overhauling / servicing of Mechanical laundry washing machine (Make : Ramsons of capacity 75 Kgs / 150 Kgs) and servicing all parts, de-scaling of internal parts & steam pipe of machine with anti-scaling compound, adjustment of machine heat / control mechanism with checking and adjustment of stops/starting system, alongwith servicing of 7.5 HP / 10.5 HP motor oiling/greasing of all moving parts alongwith motor with recommended lubricant for smooth functioning complete all incl brazing/welding as required at site complete all as specified and directed. Note :- servicing shall be done on quarterly basis or as directed at site.

M&L for carrying overhauling / servicing of Mechanical laundry dryer machine / hydro extractor machine (Make : Ramsons of capacity 50 Kgs / 60 Kgs) with servicing all parts, de-scaling of internal parts & steam pipe lines of machine with anti-scaling compound , adjustment of machine heat / control mechanism with checking and adjustment of stops/starting system, alongwith servicing of 2 HP dryer motor, and 2 HP blower motor, 5 HP motor oiling / greasing of all moving parts with recommended lubricant for smooth functioning complete all incl brazing/welding as required at site as specified and directed. Note :- Servicing shall be done on quarterly basis or as directed at site.

M&L for carrying overhauling / servicing of Mechanical laundry flat work Iron machine(Make: Ramsons) servicing all parts, de-scaling of internal parts & steem pipe lines of machine with anti-scaling compound , adjustment of machine heat / control mechanism with checking and adjustment of stops/starting system, alongwith servicing of 2 HP motor, oiling / greasing of all moving parts with recommended lubricant for smooth functioning complete all as specified and directed.

S&F in replacement of GI steam pipe line 50 mm bore heavy grade laid in floor/duct/wall etc. complete all as specified and directed.

M&L for disconnecting electric connection of Electric motor of capacity 7.5 HP/10.5HP/5HP/2HP of washing machine/ hydro extractor/ dryer of capacity 150/75/60/50 Kgs make Ramson, taking out and dismantling of electric motor with cutting out of burnt out winding, cleaning of slots and rewinding with copper conductor wire as per exising gauge including providing complete insulating materials warnishing, heating and reassembling the motor, including replacement of bearing of existing size etc. fixing on foundation and testing complete all as specified and directed.Note:Transportation from site to work shop shall be deemed to be included in quoted unit rate. Transportation of Electric motor shall be carried out through proper challan & receipt voucher or gate pass issued by Engineer in Charge.

S&F in replacement of seal with bearing assembly of existing size and make.

S&F in replacement of level sensor of existing size and make.

S&F in replacement of temperature controller of existing size and make.

S&F in replacement of heavy duty suspension springs of existing size and make.

S&F in replacement of door gasket of existing size and make.

S&F in replacement of emergency stop with element of washing machine of existing size and make.

S&F in replacement of VFD (Inverter) 3 phase, 380-480 volt, of existing model for 50-150 Kg washing machine complete all as specified & directed.

S&F in replacement of PLC with probe for 50-150 Kg washing machine complete all as specified and directed.

M&L overhauling of sluice valve and replacement of minor items such as spindle, plares, nut, bolt if required at site of size upto 250 mm complete all as specified and directed.

S&F in replacement Sluice valve PN-I.6 coforming to IS-14846 heavy duty with flanged end and brass spindle, sheet gasket 3 mm thick, MS nut bolts and washer suitable for 100 mm bore pipe including cutting of existing GI/CI/DI water pipe line to fix the sluice valve at the location and jointing with existing water mains complete all as specified and directed

All as per Item No. 27 above but of 150 mm bore.

All as per Item No. 27 above but of 200 mm bore

All as per Item No. 27 above but of 250 mm bore

S&F in replacement of ISI Marked Gun metal Gate valve with iron wheel head, screwed both ends for iron pipe of 20 mm bore complete all as specified & directed by Engineer in Charge.

All as per Item No. 31 above but of 25 mm bore.

All as per Item No. 31 above but of 40 mm bore.

All as per Item No. 31 above but of 50 mm bore.

S&F in replacement of float valve (ball valves) high pressure of PTMT with epoxy coated alluminium rod & high density plastic ball screwed for iron pipe of the size 20 mm bore complete all as specified & directed by Engineer in Charge.

All as per Item No. 35 above but of 25 mm bore.

Servicing and Maintenance of UPS of upto capacity 30 KVA suitable for three phase in put and threee phase out put installed at OT, ICU, Paedraitic,Blood Bank & MI ward at 7 AFH through Providing highly skilled Mechanic (from authorised dealer/ manufacturer ) including proper cleaning of dust etc. from in side and out side with suction blower including replacement of minor parts such lugs / thimbles tightining of loose battery connections etc. complete all as specified and directed. (Note: Spare parts shall be measured and paid for seperately under relevant item of BOQ and servicing to be done on quarterly basis or as directed at site)

Supply only Main Card

Supply only Charger Card

Supply only IGBT Card

Supply only AC / DC capacitor

Supply only relay any type and rating

Supply only Silicon controller rectifier

Supply only Radiator Fans

S&F in replacement of maintenance free batteries for UPS of capacity, 26-42 AH (Having minimum 48 months manufecturer's warrantee) suitable for upto 30 KVA UPS, three phase in and three phase out along with proper connection to existing battery bank complete all as specified and directed.

Preventive maintenance, servicing & repair of Fire Alarm System complete with control panel, driver card, dual flash based microprocessor, supports, white backlit display, checking of circuits including recalibration and testing including replacement of defective parts to make them serviceable/ smooth functionable complete all as specified and directed. Note: 1. Unserviecable spare parts to be measured and paid for separately under relevant item of BOQ. 2. Calibration to be done by OEM only. 3. Servicing and Calibration to be done on quarterly basis all as directed at site.

S&F in replacement power control card / loop driver card suitable for existing make main fire control panel installed complete all as specified and directed.

S&F in replacement heat detector / optical type smoke detector with supply voltage 9 to 33 VDC, UL/FM/LPC approved with base with suitable fixing arrangement complete all as specified and directed.

S&F in replacement PVC insulated, sheathed electric cable FRLS 1100V grade two core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area with one core for earth wire in non metallic rigid PVC conduit complete all as specified and directed.

S&F in replacement fire alarm sirens electronic type horizontal continous normal operation for atleast 50 minutes with sound level 65 DB to120 DB measured at 1.5 Mtr with sound output variation of + 5 DB with 500 mtrs range complete all as specified and directed.

S&F in replacement of manual call point with push button fired bride MS box duly painted sealed with glass including necessary electrical connection complete all as specified and directed.

S&F in replacement of Fire extinguisher CO2 type / ABC type 4.5-9 kg capacity conforming to IS-15683 with discharge pipe complete all as specified and directed.

S&F in replacement of detector complying with and type certified to EN-45 addressable type detector photo electric / optical with base with self intelligence multisensor with smoke & heat combination complete all as specified and directed.

M&L in replacement of microprocessor based detection system gas release control panel mounted on wall outside the room made of mild steel sheet, minimum 1.6 mm thick, colour of the panel shall be fire red with gas release facility including all, fitting and accessories and time delay arrangement (with setting for 30-60 sec) for flooding of gas auto and manual mode including battery charger unit with boost & trickle charger, battery box, connections to building automation system and taking down of old panel complete all as specified and directed.

Taking out unserviceable submersible pump from bore well including column pipes (upto 100 mtr depth) submersible cable, steel rope and accessories etc and re-lowering of pump after necessary repair including connecting of submersible pump and motor with required straight through joint of submersible cable up to 35 Sq mm 3 core with jointing kit compound etc. testing complete all as specified and directed.

M&L for rewinding of capacity upto 45 HP submersible electric motor any make with PVC insulated super enameled copper wire not less than the original one complete with replacement of wornout parts such as thrust plate, thrust bearing and motor coupling etc and opening of motor for rewinding, reassembling after rewinding of motor including painting of motor with one coat of epoxy paint after preparation of old painted surfaces and testing complete all as specified and directed.

M&L for construction of valve pit chamber of size 750mm x 750mm x 750mm internal dimension , 6mm thick MS steel cover with 2 Nos MS hinges suitable size welded with angle iron frame of 40x40x6mm thick with lifting hooks and locking arrangement complete with necessary earth work, brick work in cm (1:6), 230 mm thick, 150mm thick PCC bed (1:4:8) type D-2 , 15mm thick rendering in cm (1:4) internal surface finished even and smooth without using extra cement complete and external surface of wall up to 300 mm front top and applying a coat of black bituminous paint to the steel surface complete including demolition and removal of old U/S valve pit complete all as specified and directed.

M&L for servicing and maintenance of R.O. plant of ION EXCHANGE (INDIA), Model No INDRO 401, installed at OT of 7AFH Kanpur by replacing of its defective component like membrane, filter cartridge, motor, defective pipes with fitting as per existings etc. and also fill up carbon (Granular activated carbon) in the cylinder up to new cylinder up to level and rectification of fault in electronic panel of R.O. plant and replacement of defective parts. All the pipe line of R.O. to be connected to make the plant for smooth functioning complete all as specified & directed. (servicing to be done on quarterly basis)

M&L for replacement of unserviceable Bldg Security light fitting with energy efficient LED street light fitting powder coated PDC aluminium 35 Watt heat resistance toughened glass with lens dimmable LED street light fitting with lens complete with all acessories such as LED dirver and testing complete connection with copper wire 1.5 Sqmm three core from ceilling rose to street light fitting incl sutable size gi light grade bracket with clamp etc. complete all as specified and directed.

S&F in replacement Metal clad triple pole and a neutral enclosure with a three pin and earth plug and socket with one single pole MCB TP 32 Amp,240V complete all as specified and directed.

S&F in replacement of unserviceable XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 16 sq mm 4 core, laid in trenches/ducts /encased in GI pipe/fixed to pole complete all as specified and directed.

All as per Item No 61 above but of size 25 sq mm 3.5/4 core.

M&L in replacement for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead strip 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC (1:2:4) type B1 reinforced with 6mm dia MS bars @ 150mm RCC cover slab 40mm thick with two no’s fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth strip 25x4 mm protection etc. complete all as specified and directed.

Transportation of DHPP to Boiler / DG sets in 7 AFH Kanpur Cantt from MES storeyard Chakeri in containers of 25 litres and pouring in tanks complete all as specified and as directed. Note:- 1. Containers and required T&P shall be arranged by the contractor under his own arrangement.The job of filling the fuel must be completed within 2 hrs of issuance of fuel to the contractor by the dept. Non-compliance to this note will attract a penalty of Rs 500/= per job.2. For payment purpose transportation of 25 Ltr DHPP shall be considered as One Job.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out for laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling in and including spreading levelling watering and well ramming in layers not exceeding 25cm thick in solf/loose soil after pipes are laid and tested complete all as specified and directed .

Removing of excavated material not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Taking down of 20mm bore GI water tubing and connections from wall / floor / trenches etc. at site complete all as specified and directed by Engineer in Charge. Note:- Excavation and earth work shall be measured and paid for seperately under respective items of Sch 'A' given here-in-before.

All as per item no. 69 here in before but for 25 mm bore

All as per item no. 69 here in before but for 40 mm bore

All as per item no. 69 here in before but for 50 mm bore

Re-fixing of old serviceable steel tubing 20 mm bore obtained and connection in new or old position in trenches / wall / ceiling / floors etc with using all new fittings complete including making good the disturbed portion all as directed.

All as per item no. 72 here in before but for 25 mm bore

All as per item no. 72 here in before but for 40 mm bore

All as per item no. 72 here in before but for 50 mm bore

M&L for 20 mm bore GI Pipe medium grade with all necessary fittings such as bend, elbow, socket, Tee, Union, Reducer socket etc laid in trench / wall / floors including making connection to existing GI tubing complete all as specified and directed

All as per item no. 76 here in before but for 25 mm bore

All as per item no. 76 here in before but for 40 mm bore

All as per item no. 76 here in before but for 50 mm bore

General servicing of DG set of capacity 62.5 KVA installed in Pump House which include taking down of diesel filter, oil filter, lubricating oil, gaskets, unserviceable parts, measuring earth resistance values (as required) etc. and tightening of nuts, bolts, washers, greasing, etc. for proper running of DG sets complete all as specified and directed. (Note:- Servicing to be done once in 06 months, Spares as required shall be measured and paid seperetely under relevant items)

S&F of Oil filter for DG set of capacity 62.5 KVA complete all as specified & directed.

S&F of Diesel filter for DG set of capacity 62.5 KVA complete all as specified & directed.

S&F of Air cleaner filter assembly including all accessories for DG set of capacity 62.5 KVA complete all as specified and as directed.

S&F of engine sump packing (gasket) / head gasket suitable for capacity of DG Set 62.5 KVA complete all as specified and directed.

Topping up of engine oil of grade 20W40 in containers DG set of capacity 62.5 KVA complete all as specified and directed.

Topping up of coolant for radiator of any make & type for DG set of capacity 62.5 KVA complete all as specified & directed.

Testing of drinking water (chemical analysis) as per latest IS norms from authorised / approved lab after taking the sample from pump houses on quarterly basis in steralised container as per guideline of medical authority and submitting report to dept complete all as specified & directed.

Supply only of Calcium Hypo Chlorite chlorine content 65 % to 70 % ,(Calcium based high strength granular) decomposes clear in water solution , free of foreign matter, the chlorination chemical should contain appropriate quantities of dispersants, corossion inhibitors to prevent encrustation scaling in distribution systems, mercury and other heavy metal conteminents in chlorination complete all as specified and as directed.

Comprehensive maintenance of electrically operated passenger lift installed in Family Ward of 7 AFH of capacity 15 passenger (1020 Kgs) – 1 Nos {suitable for (G+1)} with Emergency Block Panel (EMBP) including electric controllers, oiling greasing of all motors, rope, gear boxes with the use of gear oil & Mobil Oil including minor parts such as oil seal, connector, indicators, magnetic gate lock male & female contact, door bearing, door sleeper, door roler, door scate with resting plate, door rope, door spring, car liner etc for Lifts complete all as specified and directed. Note:- (i) Spares required shall be measured & paid under relevant items below.

S&F in replacement of Door drive VVVF complete all as specified and directed.

S&F in replacement of Landing Interface card complete all as specified and directed.

S&F in replacement Car display card 12 V DC complete all as specified and directed.

S&F in replacement Processor Card 12 V DC complete all as specified and directed.

S&F in replacement DCL Card 12 V DC complete all as specified and directed.

S&F in replacement CPU Card 12 V DC complete all as specified and directed.

S&F in replacement Hardware Card 12 V DC complete all as specified and directed.

S&F in replacement Landing Display Card 12 V DC complete all as specified and directed.

S&F in replacement Read switch 12 V DC complete all as specified and directed.

S&F in replacement Screen Sensors for the lift Doors complete all as specified and directed.

M&L for replacement of Electronic Drive in Elevator Control Panel relevant for Electric Motor complete with key board built in or detachable for proper control & command inputs and proper analysis of Errors & trouble shooting by an engineer for proper functioning of the lift complete all as specified and directed.

S&F in replacement of Lift Automatic Rescue Device (ARD) System suitable for 1020 Kg lift capacity and Nos of stop 5-10 complete with suitable Nos of battery (Make-Exide) and electronic command/control system with following specifications :- (a) Extensive signaling : Status LEDs indicate the load, mains power present, backup inverter on, battery charging on, battery fault, Over load, Under load, battery charging over, over current fault condition. There is a fault relay which indicate battery fault or battery low condition. (b) Smart CPU to detect the elevator power condition at real time and operate the safe landing for any emergency happned.

keerti trading corporation (BID ID -3511871)

Preetpowercontrol (BID ID -3509680)