Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC 7 4 DNYANESH SOCIETY WARJE MALWALDI PUNE 411 058 | PUNE | MAHARASHTRA | 411058 | L1 | Accepted-AOC lowest | |
| 2 | L2₹32.3 L+₹3.9 L (13.7%)Rejected-Finance | L2 | Rejected-Finance RATE HIGH | |
| 3 | L3₹32.4 L+₹4.0 L (14.2%)Rejected-Finance A 2 206 SAI DWARKAMAI NIBM ROAD KONDHWA PUNE 411 048 | PUNE | MAHARASHTRA | 411048 | L3 | Rejected-Finance RATE HIGH | |
| 4 | L4₹33.0 L+₹4.5 L (16.0%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L4 | Rejected-Finance RATE HIGH |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
8 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Pune
NO 1GEN BHAGAT MARG PUNE
8510 CERTAIN B R REPAIRS MAINT WORKS TO E M INSTALLATIONS UNDER AGE B R I OF GE SOUTH PUNE
2024_MES_636762_1
8510 GE SOUTH PUNE
Open Tender
Civil Works
Item Rate
180 days
GE South Pune
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE SOUTH PUNE
₹90,000
Yes
11 Mar 2024
10 Jan 2024
10 Feb 2024
10 Jan 2024
8 Feb 2024
27 Jan 2024
Amount
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling of old unservieable wiremesh fencing of any type, complete all as specified & directed.
Dismantling posts & struts (Wood, steel or RCC), embeded in concrete, any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks including dismentling of old unservieable PCC block / stone / brick masonary, complete all as specified and as directed
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.
Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of required colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, north light curves, fixed with zinc coated self drilling fasteners including EPDM washers complete laid with one corrugation side lap and minimum 150mm end lap, laid to slope including dismantling of old unserviceable Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified & directed.
M&L for machine cut kota stone slab as in flooring 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, grinding and mirror polishing, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note:- The size of kota stone slab shall not be less than 550mmx550mm (cut size except the location where balanced).
Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified & directed.
M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slabs and tiles of any description or thickness, complete all as specified and directed.
S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.
M & L for preparing old decorated plastered surfaces of ceilings, pillasters, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of oil emulsion distemper complete all as specified and as directed.
M & L for complete removal of existing treatment from old decorated surfaces of walls, preparation of surfaces and applying a thin layer of wall care putty including one coat of primer including two coats of oil emulsion distemper, complete all as specified and directed
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces complete all as specified and directed.
M & L for joint free non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:6 including dismantling of old existing floor hearths / finishes, complete all as specified and directed.
M & L for glazed white ceramic tiles as in vertical surface 350x250x7mm / 450X350X7mm thick size, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick backing coat in CM 1:4 including dismantling of old existing wall finishes / wall plaster including triangular filleting on top edges in CM 1:4, complete all as specified and directed
M&L for 25 mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.
S & F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc including concrete bedding and making good to floor complete all as specified and as directed.
S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm bore complete all as specified and as directed.
Taking down shutters of any description exceeding 2 Sqm each, complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.
Taking down chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.
Taking down chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.
S&F 35mm thick flush shutters, solid core contruction, with block board core and plywood face panels, commercial type on both sides including lipping all around the shutter, complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wooden surfaces complete all as specified and as directed.
M&L for preparation of old or previously treated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and as directed.
S&F 200 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and as directed.
S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and as directed.
Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surfaces of walls, surface finished even and smooth with out using extra cement, complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces of walls, surface finished even and smooth with out using extra cement, complete all as specified and as directed.
M&L for 20 mm thick rendering in cement mortar 1:4 on external / internal stone wall surfaces, surface to be finished even and smooth with out using extra cement, complete all as specified and as directed.
Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe 290 Gde E-165 including dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
M&L for mild steel framed work as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running railsand guides) and hanging, also fastening and fixing including dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S & F of mild steel screw bolt dia of shank 5 to 10 mm (machine made) n. exc. 5 cm in length, with haxagonal or square head at one end and screwed the other or screwed both ends, each screw end to be fitted with washer etc. complete all as specified and directed.
M&L for mild steel round bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, including preparation of new steel surfaces, complete all as specified and directed.
M & L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
Supply only chain link fencing, mild steel galvanised of any size or type, complete all as specified and directed by Engr-in-charge
Removing the excavated materials exceeding 250mtr but n.exc 500 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in roof kerbs or benching, rounded or chamfered on edges etc., complete all as specified and directed.
M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts, complete all as specified and directed.
S&F ventiltors/ louvers with partially guaged shutter using 4 mm thick x 10 cm wide frosted glass strips and including stainless steel wire cloth 0.36 mm nominal dia& 1.18 mm width aperture for mosquito proofing, by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352
Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate), finished the surfaces even & smooth using extra cement, complete all as specified and directed.
M&L for coloured precast cement concrete interlocking tiles 60mm thick, M-35 Grade, of any shape and size, conforming to IS-15658-2006 glossy finish as in floor / pavement laid over and including 30mm thick stone dust cushioning including demolition of old unserviceable stone slabs / tiles, complete all as specified and directed
M & L for precast, coloured, chequrred, cement concrete tiles, glossy finish of size 305x305x25 mm thick size, machine pressed, set & jointed in neat cement slurry @ 3 Kg/ Sqm and pointed with grey cement and pigment as in floor and cut and polished, laid over and including 20 mm thick screed bed in cement mortar 1:4 including demolition of old unserviceable stone slabs / tiles, complete all as specified and directed
S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 03 Nos. in each door frame, welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (20mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.
PAL CONSTRUCTION
SARATH ENTERPRISES
M/s.BAJRANG CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .