Provn of certain special repair and minor work under AGE B/R-II Kapurthala under GE Kapurthala

Amount

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10mm thick cement rendering (1:4) and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, with 15mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15mm thick cement screed bed in cement mortar (1:6) and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm as in vertical surface such as skirting dados and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 10 mm thick rendering in cement mortar (1:4) and rubbish off the premises complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and rubbish off the premises complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for machine cut kota stone for flooring ,staircase 18-20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 20mm thick bedding layer in CM 1:6 as specified and directed.

M&L Machine cut kota stone slab 18-20mm thick in riser pf steps, skirting, dado over cement screed base laid and jointed with grey cement slurry mixed with puigment to match the shade of the slab including rubbing and polishing bedded on 10mm thick bedding layer in CM 1:4 as specified and directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 Complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas , manhole cover , tank platform etc. complete all as specified and directed.

Racking out joints and pointing to brick work in wall or to brick on edge built in cement mortar (1:3) etc complete all as specified.

Taking down cement plaster on brick work or concrete surfaces including racking out joints all as specified and as directed.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for 15mm thick Rendering in cement mortar (1:4) on brick work or concrete surfaces with water proofing compound finished even and fair etc complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for 10mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement on ceiling surfaces etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of wall care 1.00mm thick putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat wallcare 2.00mm thick putty complete all as specified and directed.

M&L for Preparation of new plastered or unplastered decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed. Note- Exterior emulsion paint to be done by Roller.

M&L for preparation of new plastered surfaces of walls and applying one coat of wall care putty 3mm thick to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed (Note- OBD to be done by Roller).

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of appropriate primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of whitewash over a 1mm thick wallcare putty complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distermper over one coat of wallcare putty 2.00mm thick complete all as specified and directed.

M&L for Preparation of old plastered or unplastered decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed. Note- Exterior emulsion paint to be done by Roller.

M&L for preparation of new plastered or unplastered surfaces of walls vertical or curved and applying two coats of cement base paint, white or tinted including chalk whiting priming coat complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for cleaning the surface and made free of vegetation, dirt, foreign particles including uprooting of tree roots from walls/roof of any girth at any height/ location of any depth by dismantaling brickwork/PCC and making good the damaged portion as existing by PCC 1:2:4 type B-0 and finished with 15mm thick plaster in 1:4 all as specified and directed. liatance all as specified and directed.

M&L rendering 10mm thick on brick or concrete surface in cement mortar 1:3 with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note- Water proofing compund to be measured and paid seprately.

Supply and apply high build elastomeric waterproofing coated based on pure hydrophobic polyurethane cold applied or spray, brush applied, membrane with an elongation of 280 % and tensile strength of 2.7N/mm2 as per ASTMD 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure, minimum 88% solid content. The system includes final base preparation, epoxy primer application with 100% water dilution and pure polyurethane application in two coats with minimum consumption of 1.2 kg/sqm. Note: Application should be done with company authorised applicator.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but not exc 4sqm each complete all as specified and directed.

S&Fing for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified and directed.

M&L PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed.

S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and as directed.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (d) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

M&L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framed work of water tanks and similar work coforming to Fe 290 Gde E-165 complete including taking down all as specified and directed.

S&F steel ventilators fixed type with glazing bars etc complete all as specified and as directed.

S&F 4.00mm thick sheet glass, ordinary quality in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts including leaping wooden complete all as specified and directed.

S&F 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified and directed.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as specified and directed.

S&F PVC tubing 15mm dia medium grade with all fittingS&Fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 15mm dia medium grade with all fittingS&Fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed.

S&F PVC tubing 20mm dia medium grade with all fittingS&Fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20mm dia medium grade galvanized with all fittingS&Fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F wash hand basin mixer 15 mm Brass CP for mixing hot and cold water with all necessary fittings screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed.

S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 20mm dia aluminium chromium plated tubular towel rails D type, 60cm long between flanges, complete all as specified and as directed.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed.

S&F in repairs for vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed.

S&F in repairs shower rose 125mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed.

S&F soap dish chromium plated heavy duty complete all as specified and directed.

S&F in repair 25mm MS curtain rail mild steel chromium plated with fixing brackets, rollers of annodised a,uminium alloy all as specified and directed.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good complete all as specified and directed.

Taking down eaves gutters and rainwater pipes including all fittings as specified and directed.

Dismantling of cast iron pipe any diameter jointed with cement mortar or lead including all fittings from wall or floors as specified and directed.

S&F 75 mm UPVC pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F 75 mm UPVC pipes single socketed in any length laid in floor complete all as directed.

S&F 75 mm UPVC bend complete all as directed.

S&F 75 UPVC junction single, (single T) equal or unequal complete all as specified and as directed.

S&F 110 mm UPVC pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F 110 mm UPVC bend with complete all as directed.

S&F 110 UPVC junction single, (single T) equal or unequal complete all as directed.

S&F 110mm UPVC vent cowl complete all as specified and as directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length laid in floor complete all as directed.

S&F 75 mm PVC (SWR) bend complete all as directed.

S&F 75 PVC (SWR) junction single, (single T) equal or unequal complete all as directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F 110 mm PVC (SWR) bend with complete all as directed.

S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed.

S&F 110mm PVC(SWR) vent cowl complete all as specified and as directed.

Dismantiling water tank PVC 500 Ltrs and removing from site complete all as specified and as directed.

S&F rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 500 ltrs capcity incl fittings and as directed.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs complete all as specified and as directed.

S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface making surface completely dry after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed.

M&L for 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab complete all complete all as specified and as directed.

M&L cement concrete Type B0 1:2:4 (12.5mm graded stone aggregates) as in roof kerbs, rounded or chamfered edges complete all as specified and directed.

M&L Cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone agg) as in foundation, filling and mass concrete, complete all as specified and as directed.

M&L for cement concrete 1:5:10 type E-2 (using 40mm stone aggregate) as in foundation / sub base etc complete all as specified and directed.

M&L for providing precast cement concrete in window or door cills, lintels, landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs and similar articles set in cement mortar (1:6) using type B1 (1:2:4) (20mm graded stone aggregate) all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS-15658, 2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushioning complete all as specified.

M&L for fine sand filling under floor or in foundations in layers including watering and consolidation complete all as specified.

Demolition and breaking up 200mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) complete all as specified and as directed.

M&L for RCC 200mm bore pipe class NP-3 laid and jointed complete with collars laid in trenches and tested complete all as specified and as directed.

M&L for concrete bed to drain pipes 200mm bore in cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) including packing under and completely surrounding pipes (hauncing) with concrete after they are laid and tested complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed of RCC NP-2 pipe 300mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified and as directed.

M&L for Reinforced concrete 300 mm dia pipe class NP-2 laid & jointed complete with collars, complete all as specified and directed.

M&L for Reinforced concrete 200mm dia pipe class NP-2 laid & jointed complete with collars, complete all as specified and directed.

M&L for concrete bed to drain pipes 200mm bore in cement concrete (1:3:6) type D-2 (using 20mm graded stone aggregate) including packing under and haunching against sides of pipe after they are laid and tested complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel and benching for manholes and haunching around manholes frames including necessary form work and finishing exposed surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for RCC Septic tank conventional designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users (DRG No CEJZ/STD-242/07) complete all as specified and as directed.

Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 m dia X 4.50 m effective depth (DRG No CEJZ/STD-242/07)

Excavation in trenches not exceeding 1.5m wide & not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Removing excavated material to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Dismantling post and struts (wood, steel or RCC) in natural ground any section including taking out embedded portion and making good distributed ground complete all as specified and directed.

Dismantling barbed wire fencing from post complete all as specified and directed.

Dismantling fencing wire mesh any type, any type any size all as specified and directed

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out soft/loose soil, including removal of excavated earth upto a distance 500m from starting point complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates for foundations, fillings and mass concrete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick cement concrete Design Mix M-25 using 20 mm graded crushed stone aggregates) as in surface course of hardstanding, complete all as specified and directed.

S&F rolled section Fe 410-W (Gde-E-250) Quality-A as in framing for cladding, glazing and the like fixed angle cleat and connecting plates, etc complete all as specified and directed

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed.

S&F Mild steel screw bolts 16mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long complete all as specified and directed.

M&L for providing 50mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and fair without using extra cement concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified.

S&F M S work such as angle iron post, flat iron in fencing including cutting tops and making swan neck including welding, drilling holes, notching for wire, etc embedded in concrete fixed vertically, conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Mild steel Round bars Fe-410 -W (Gde E-250) 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for fencing posts, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S&F Mild steel screw bolts 11 to 15mm dia(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified.

S&F MS screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal / square nuts exc 10 cm and not exc 15mm , dia of neck 5 to 10mm all as specified and directed.

M&L for applying two coats of synthetic enamel paint on preparation of newly steel surfaces over a coat of Zinc chromate primer any description over 10 cm width of girth not otherwise described all as specified and directed .

Supply only Chain link MS galvanised fencing of 4mm dia and 50 mm box size complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S&F in repair steel rolling shutters of 1.25mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle and fixed the clamps of shutter on wall surface and making good in cement mortar (1:3) or PCC 1:2:4 type B-1 including taking down of existing shutter complete all as specified and as directed

S&F of 1mm thick mild steel plain sheet made to shape as in hood cover of rolling shutter, covering to door shuttersetc as directed complete all as specified.

S&F Ball bearing for rolling shutters complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed

M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :-

(a) One light point controlled by one, one way switch complete all as specified and as directed.

(c) One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and as directed.

(d) One socket outlet 3 Pin, 5 Amp on same board complete all as specified and as directed.

M&L for point wiring with 2.5 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 2.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board.

S&F switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and as directed.

S&F switch piano flush type single pole one way 15 Amp (ISI Marked) complete all as specified and as directed.

S&F socket out let 2 in 1, 3 pin 5 Amp flush type (ISI Marked) complete all as specified and as directed.

S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked) complete all as specified and as directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and as directed.

Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. Note :- The rates also include making good the same to match with the existing surface.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed Make Polycab Cat part No PCGLB AX 2060 or equivalent in Philips/Bajaj/C&S electric/Surya.

Taking down old unsv DB and S&Fing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed.

Taking down unserviceable MCB’s and S&F following type/rating MCB’s including necessary connection as under:-

(a) S&F of MCB, 10 to 32 Amp, SP, 240 Volt.

(b) S&F of MCB, 25 to 32 to Amp, SPN, 240 Volt.

S&F LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. Make : Wipro/Havells/Bajaj or equivalent as mentioned in list of makes.

Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed.

M&L for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed. Note : For payment purposes 18cm thickness shall be considered.

M&L for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed.

Peerzada And Sons (BID ID -3385961)

M/S GHULAM HASSAN MIR (BID ID -3386348)