Supply and Erection of Stre...

Amount

Supply of high-quality integrated LED Street Light with system wattage of 100 W – 120 W. The luminaire should have minimum system efficacy of 140 lumen/watt for the measured lumen output/system wattage. The LED used shall have CCT of 5700K, SDCM =5 and CRI=70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminium, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” and shall not be bolted/welded/mechanically joined to the luminaire housing to ensure robust design. The luminaire shall have Integrated IP66 polycarbonate front cover/lens. The name of the brand should be embossed/engraved and should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 75K hours@L70. Product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 and impact resistance shall be IK8 or above. Control gear compartments shall be top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 10 KV/5KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 5KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2/ IEC 61000-4-5. The luminaire should be of Class B Serviceability. The LED used in the luminaire shall be SMD type only and shall be from either Osram, Nichia, Signify, APT Electronics Co. Ltd., CREE make or equivalent. The Driver should be asphalt potted and should be a BIS approved driver. The driver shall be replaceable. The driver shall have operating voltage of 120V to 270V, PF=0.95 @full load, THD =10% @ full load, In-built surge protection of 4KV and external surge protection of 10kV. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown/cut-off at less than 90V and 300 V (±10%) and have an auto recovery feature. The driver shall comply to IEC61547 and IEC 61000-3-2. The driver shall be EMI/EMC Complied as per EN55015/CISPR15. The luminaire shall be able to give Constant Light output (CLO) between voltage range of 140V to 277V. Luminaire manufacturer must have Inhouse NABL accredited lab to conduct LM79, Type test as per IS10322, `FAT` before dispatch as per IS 10322 and IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer within 15 days of award of LOI. The LED Luminaire and it`s driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approval: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, IK Test report for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire and Driver.

Bidder Name

Amount

Bharat Pumps and Projects (GSTN-06AAFFB8981N1ZT) BID ID -1232175

JMD ELECTRICALS (GSTN-06BMLPK0651F1Z9) BID ID -1232418

Aditya Electrical and Control (GSTN-NA) BID ID -1232278

JMD ELECTRICALS (BID ID -1232418)

Aditya Electrical and Control (BID ID -1232278)

JMD ELECTRICALS (BID ID -1232418)

Aditya Electrical and Control (BID ID -1232278)