Upgradation and Modification of Administrative Building (Civil and Electrical) at CSIR-IMMT, Bhubaneswar

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Extra for providing and placing in position 2 nos. 6mm dia. M.S. bars at every third course of half brick masonry ( with F.P.S bricks )

Half brick masonry with non modular fly ash bricks of class designation 7.5, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)

Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, window sills, facias,trades and risers of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, includingedge groove of the treads rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour /lakha red Area of slab up to 0.50 sqm

Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for , vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid without cement mortar moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour lakha red Area of slab over 0.50 sqm

Providing and fixing glazed vitrified tiles (600 X 1200mm) (Johnson / Kajaria /Somany) conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, as approved by Eningeer-in-Charge in walls, skirting, over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in linear and curvilinear faces made out of 4mm thick Exterior grade ,FR grade aluminium composite (Alstone make) of timber series consisting of 3.00 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.50mm thick). The alluminum composite pannel cladding sheet shall be coil coated ,with Kynar 500 based PVDF/Lumiflon based fluropolymer resin coating of apaproved colour and shade. using stainless steel screws, weather silicone sealant, etc.For purpose of payment only the actual area on the external face of the composite panel cladding shall be measured in Sqm which includes width of all grooves. (The alluminum frame shall be paid separately).

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Kitply/ Green / Century) or equivalent

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete(Godrej/Hardwin)

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (Godrej Make)

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S.frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick pre laminated PVC door shutters

Structural steel work in single section fixed with or without connecting plate including, cutting, hoisting, fixing in position and applying coat of approved steel primer all complete.

Providing and fixing 0.50 mm TCT ,high strength (550MPa yeild stress minimum) anti corrosive steel sheet AZ-150 with resin coat on both surfaces to 150 grams per sqm of coating (total both sides).The sheets will have lenghth up to 12.00 mtrs or as desired by EIC.The The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing stainless steel (Jindal, Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified floor tiles polished finish of Size of Tile 600 x 1200 mm (Johnshon/Kajaria/Somany)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x1200 mm (Laticrete make )

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter (Supreme/Ashirvad)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centreshall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats oprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistantboard

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/ mK.

12 mm cement plaster of mix :1:6 (1 cement : 6 coarse sand)

Distempering with 1st quality acrylic distemper (ready mixed) (Asian ,Tractor,UNO)of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work (Agency shall bring colour container at a time & make signature of EE (Civil), before start the work and keep the container till final bill is passed)

Finishing walls with Acrylic Smooth exterior paint of Apex make of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Apex of Asian smart care)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Apcolite of Asian make )

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Birla wall care)

Demolishing R.C.C. work manually/ by mechanical means, including stacking of steel bars and disposal of unserviceable material at the dumping yard of CSIR -IMMT as per direction of Engineer-in-Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialdumping yard of CSIR -IMMT as per direction of Engineer-in-charge.In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at CSIR -IMMT store yard :Of area 3 sq. metres and below as per direction of the Engineer-in-charge

Dismantling tile work in floors laid in cement mortar, including stacking/disposal of unserviceable material at CSIR-IMMT Dumping yard as per direction of the Engineer-in-charge. For the thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish at CSIR-IMMT Dumping yard as per direction of the Engineer-in-charge

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling stacking of serviceable material at CSIR-IMMT store yard and disposal of unserviceable material at dumping yard of CSIR-IMMT as per direction of the Engineer-in-charge .

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White vitrous china Orrissa pattern WC pan of size 580X440mm with integral type foot rest.

Providing and fixing P.V.C. waste pipe for wash basin including waste fittings complete. Flexible 40 mm dia

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : PVC ,110 mm inlet and 110 mm outlet

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500 x 900mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes .(Supreme/Ashirvad)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work.25 mm nominal outer dia Pipes (Supreme/Ashirvad)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge External work. 50 mm nominal outer dia Pipes (Supreme/Ashirvad)

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length of 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore. (Jaquar/plaza/plumber)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 07) (Hindalco make)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron (Hindalco make)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) (Hindalco make)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing Urinal (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm( URS-WHT-13253N ,Jaquar make)

Providing and fixing Auto closing Concealed Urinal Flush Valve With Wall Flange PRS-073,Jaquar make)

Providing and fixing of thin rim table top basin of size 495X395X150 mm of Jaquar make make model-JDS-WHT-25909 1including all acessories etc.

Providing and fixing Basin tap having Exposed Part Kit of Single Concealed Stop Cock Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals) & Basin Spout(( LYR-38441K,Jaquar make ) with Regular Body of Single Concealed StopCock (Composite One Piece Body) withCartridge, but without Exposed Parts(ALD-441,Jaquar make)

Providing and fixing EWC pan CNS-WHT-853S220SPPSM Rimless Single Piece WC With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x665x750 mm( Jaquar Make)

Providing and fixing Toilet Paper holder (Model-AKP-35751P,Jaquar make)

Providing and fixing of Health Faucet of 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook(jaquar make, ALD-573)

Providing and fixing of 2 Way Bib Cock With Wall Flange (Jaquar make,FLR-5041N)

Providing and fixing Curved shaped urinal partition of 10mm thick frosted glass size 900mm H X 450mm W (Model-JSE-CHR-110UC450X,Jaquar make)

Providing and fixing of Roller blind( SERENE OPAQUE,Black out) of VISTA make and colour as per the direction of EIC.

Providing and fixing SS(304 grade) decorative handle of approved make design of size 600 mm .

Providing and fixing of roller for alluminum window of approved make

Providing and fixing of star lock for alluminum window of approved make

Refixing the existing wooden sinngle/ doule leaf decorative flush door shutter in good condition incuding fixing necessary screws as required as per direction of Engineer-in-charge.

Refixing of existing PVC door frame including PVC door shutter including M.S. butt hinges 100 mm X 58 mm X 1.90 mm , with black enamelled mild steel screws 40 mm and 20 mm M.S. screws wherever required alongwith M.S. screws of 65/100 mm size to be used for fixing of PVC frame to the wall, complete item as per direction of Engineer-in-charge.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative lamination on both sides

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper

French spirit polishing :Two or more coats on new works including a coat of wood filler

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards,lock strike-plate and shock absorbers as specified and applying acoatof approved steel primer after pre-treatment of the surface as directedby Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail toeach jamb

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Deduct for not providing hinges in doors, windows or clerestory windowshutters with :ISI marked Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters

Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm (Finolex/ Poly-Cab/RR / KEI make) ISI marked FRLS PVC insulated single core copper conductor cable in surface/ recessed PVC conduit medium class (AKG/Kinjal/Polycab/Precision make) with modular type 5A switch, modular base & cover plate on suitable size modular type metal box (Legrand myrius /schneider clipsal/anchor woods make) make incorporated with Neutral & Earth link & earthing the point with 1.5 sq mm FRLS PVC insulated single core copper conductor cable etc as required. Group – C

Supply and fixing 5/6 amps.modular type (1 module)switch on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing15/16 amps.modular type (1 module) switch on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing 5/6 amps.modular type socket (2 module) on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing 5 pin, 15/16 amps.modular (2 module) type socket on the existing modular plate & switch box including connections etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply & fixing of modular type RJ-11 telephone socket in the existing modular box for telephone connection including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make.

Supply & fixing of modular type RJ-45 internet socket in the existing modular box for telephone connection including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make.

Supplying and fixing Modular stepped type electronic fan regulator, 2 module, 120W in the existing modular switch box including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make

Supply and fixing of 1 or 2 modules, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing of 3 modules, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supply and fixing of 8 modules, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Supplying and fixing of 5amp ceiling rose on the existing junction box/wooden block including connections etc. as required.

Supply and fixing extra down rod of 20cm length GI pipe , 15mm dia (heavy gauge) including painting etc as required.

Supplying & fixing the louvers/shutters and bird protection net complete with frame, up to size of 380 mm sweep exhaust fans etc as required

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (Legrand myrius /schneider clipsal/anchor woods) make

Wiring for light/ power plug with 4X10 sq. mm FRLS PVC insulated copper conductor single core cable Finolex/ Poly-Cab/RR / KEI make) in surface / recessed medium class PVC conduit (AKG/Kinjal/Polycab/Precision) alongwith 2 Nos. 6 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and drawing 3 x 1.5 sq mm size of FRLS PVC (Finolex/ Poly-Cab/ RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Trunking as required.

Supplying and drawing 3 x 4 sq mm size of FRLS PVC (Finolex/ Poly-Cab/ RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Trunking as required.

Supplying and drawing of 2pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and fixing of 20 mm dia PVC conduit in surface/recessed PVC conduit medium (AKG/Kinjal/Polycab/Precision) including cutting the wall & making good the same in case of recessed conduit etc. as required.

Supplying and fixing of 25 mm dia PVC conduit in surface/recessed PVC conduit medium (AKG/Kinjal/Polycab/Precision) including cutting the wall & making good the same in case of recessed conduit etc. as required.

Supplying and drawing of UTP 4pair CAT-6 LAN 1 run cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and fixing of 4 (4+12) way, Double Door, three pole and neutral, sheet steel, MCB distribution board , 415 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections,. including painting, earthing etc. as rquired. Legrand/Hager/Siemens/ C &S make.

Supplying and fixing of single pole 6 to 32 amps rating, 240 volts MCB (C series) of Legrand/Hager/Siemens/ C &S make in the existing MCB DB complete with connections, testing and commsissioning etc. as requried.

Supplying and fixing 63amp, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25mm x 5mm GI strip in 40 mm dia GI pipe from earth electrode including connection with G.I. nut, bolt, spring, washer exacavation and re-filling etc. as required

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required.

Laying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade armoured cable as approved by dept. Engg. of 3 core x 6 sq mm size in the existing trench / masonary open duct etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3 core x 6 sq mm size (clamped with 1mm thick saddle) on wall surface as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 core x 25 sq mm size (clamped with 1mm thick saddle) on wall surface as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 core x 70 sq mm size (clamped with 25 x 3 mm flat clamp) on wall surface as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 core x 25 sq mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 core x 70 sq mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying & installation, testing and commissioning of smoke detector with builtin LED and mounting base complete with all connections etc as required.

Supplying & installation, testing and commissioning manual call box of ABS type in surface or recess etc. complete as required.

Supplying & installation, testing and commissioning fire alarm sounder, mounted on ABS box etc. complete as required.

Supply & laying of 2 x 1.5 sqmm fire alarm armoured cable , 600/1000V rated with annealed copper conductor having XLPE insulation, stell wire armouring & FRLS outer sheath complete as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Suitable for operation on Electronic regulator unit for speed control. (Havells / Crompton / Atomberg or similar model as approved by dept)

Supplying, installation, testing and commissioning of Outdoor type, double door, wall mounted , cubicle type, compartmentalized electrical panel made out of 2 mm thickness of metallic sheet steel of tentative panel size 0.7 mtr height, 1.8 mtr width & 0.3 mtr depth (or as approved), including supplying, installation & internal wiring of following mountings, to be mounted on a metalic structure made out of required size MS angle & frame complete as required,duly acid treated for derusting, primered and painted with powder coating of approved shade as per drawing approved by engineer in charge. a) Incommer:- One number 200 A, 36KA FP MCCB with rotary handle, thermomagnetic release & terminal speaders SIEMENS / L & T ( L & K) / C & S/ Legrand make or as approved by dept. b) Incommer:- One number 125 A, 36KA, FP MCCB with rotary handle, thermomagnetic release & terminal speaders SIEMENS / L & T ( L & K) / C & S/ Legrand make or as approved by dept. c) Outgoing:- One numbers 200 A, 36KA, FP MCCB with rotary handle, thermomagnetic release & terminal speaders SIEMENS / L & T( L & K) / C & S/ Legrand make or as approved by dept. d) Outgoing:- One numbers 125 A, 36KA, FP MCCB with rotary handle, thermomagnetic release & terminal speaders SIEMENS / L & T ( L & K) / C & S/ Legrand make or as approved by dept. e) Outgoing:- Six numbers 63 A, FP MCB SIEMENS / L & T ( L & K) / C & S/ Legrand make or as approved by dept.. f) Two number bus-bar chamber comprising four strips (25 x 5 mm , 100% neutral ) copper bus-bar of suitable length mounted on insulator etc as required or as approved by dept. g) Two nos digital three phase, three line display Multifunction meter (V, I, KVA, KWH, PF) with round CT (200/5amp) - 6nos , 6A MCB, C-series SP - 6 nos, LED Indicator -6nos. (Meter-Secure/L&T/L & K/ Havells make or as approved by dept).

Supplying, installation, testing and commissioning of indoor type, wall mounted , cubicle type, compartmentalized electrical panel made out of 2 mm thickness of metallic sheet steel of tentative panel size 0.7 mtr height, 0.9 mtr width & 0.3 mtr depth (or as approved), including supplying, installation & internal wiring of following mountings, to be mounted on a metalic structure made out of required size MS angle & frame complete as required,duly acid treated for derusting, primered and painted with powder coating of approved shade as per drawing approved by engineer in charge. a) Incommer:- One number 200 A, 36KA, FP MCCB with rotary handle, thermomagnetic release & terminal speaders SIEMENS / L & T ( L & K) / C & S/ Legrand make or as approved by dept. b) Outgoing:- Six numbers 63 A, FP MCB SIEMENS / L & T ( L & K) / C & S/ Legrand make or as approved by dept.. c) One number bus-bar chamber comprising four strips (25 x 5 amp , 100% neutral ) copper bus-bar of suitable length mounted on insulator etc as required or as approved by dept.

Supplying of wheather proof cable end box 140 mm x 140 mm x 95 mm (or as approved) size out door type PVC box on existing tubular pole (Sintex/hensal/ Schininder make ) having one no 6 A rating SP MCB C-Series and connector for cable connection etc as required.

Supplying, installation, of Heavy Duty exhaust fan of 300 mm sweep of (Almonard / Havells/ Crompton make) in the existinge wall, including making the damage good, connection, testing, commissioning etc as required.

Supplying, installation, testing and commssioning of 400 mm sweep wall fan with inbuilt regulator of Havells /Crompton / Almonard make

Supplying & installation, testing and commissioning of prewired round LED fitting of 2000 lumen output not more than 20watt in surface or in recess (Philips/Passolite / Klite as approved) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supplying & installation, testing and commissioning of prewired baten fitting/LED channel (box type) suitable for two numbers LED tube light of (Philips /Passolite / Klite as approved) with all accessories and 2 nos 2000 lumen led tube etc. directly on wall including connections with 1.5 sq mm PVC insulated, copper conductor, single core cable etc.as required.

Supply, installation, testing and commissioning of prewired street light LED fitting of 150watt, minimum 140lumen/watt (Philips BRP 504 LED 210 / Lighting Technology/ Passolite as approved by Engineer in charge ) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc. as required.

Supplying and installation of 25amp 2mod Modular starter including modular G.I box and modular base and cover etc as required .Legrand/Hager/Siemens/ C &S make.

Supplying & installation, testing and commissioning of prewired slim batten led light of size 2ft, 10W (approx), 900lumen,(Philips /Passolite/ Klite or as approved by dept) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supplying & installation, testing and commissioning of prewired recessed mounting downlighter square fitting, 2ft x 2 ft of 3000 lumen output, not more than 30watt , (Philips/ Passolite / Klite as approved) with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supplying & laying of DLP Trunking System (100mm*50mm) Polyvinyl Chloride (PVC),white colour. (Make- Legrand/ AKG / Maruti) with following accessories: 100 mm X 50 mm Body & Cover etc as required as per site requirement

Shifting of one floor mounted electrical panel (size: 1000 x 1100 x 250mm approx) from ground floor of Impact Building and reinstallation of the same panel at a new location below staircase etc as required as per direction of engineer incharge.

Dismantling of old electrical wiring, panels - 2 nos & network wiring (Each floor of Impact Building, Total 3 floors) etc as per direction of engineer incharge & deposit the same in IMMT General Store etc. as required as per direction of Engineer In Charge).

Supplying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade (POLYCAB / Finolex / KEI / RR make) armoured cable as approved by dept. Engg. of 3 core x 6 sq mm size in the open duct / existing trench /pipe etc. as required.

Supplying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade (POLYCAB / Finolex / KEI / RR make) armoured cable as approved by dept. Engg. of 3.5 core x 25 sq mm size in the open duct / existing trench /pipe etc. as required.

Supplying of one number PVC / XLPE insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade (POLYCAB / Finolex / KEI / RR make) armoured cable as approved by dept. Engg. of 3.5 core x 70 sq mm size in the open duct / existing trench /pipe etc. as required.

SACHIDANANDA JENA (BID ID -951289)

Sarthak Das (BID ID -951482)

SUBHADARSHI NAYAK (BID ID -951370)

HEMANTA KUMAR JENA (BID ID -951507)