REPAIR/REPLACEMENT OF HT POLES, ACSR CONDUCTORS, HT O/H LINES AND UG CABLES TRANSFORMERS, GODS VCBS, ACBS AND OTHER ALLIED E/M WORKS AT MIL STATION BHUSAWAL UNDER GE (S) AHILYANAGAR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

Supply & laying DWC Cable duct pipe of size 110 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed.

Dismantling existing cross arms of MS channel or angle sections, nuts, bolts and washer etc from HT/LT pole of any size complete all as specified and as directed.

S & F cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections ISMC 100 including nuts, bolts, washers, welding in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide primer and anti climbing device comprising 2.24 mm dia galvanised steel 2 strand barbed wire with 2 mm dia barbs wrapped spirally round poles complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty HT UG cable of size 95 sqmm, 3 core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall sheathed including cable gland, lugs, jointing material etc and jointing, connecting, testing and commissioning including taking out existing cable alongwith protection covers complete all as specified and as directed.

Dismantling street steel pole with and all accessories complete all as specified and directed.

Supply Installation and erection in vertical position steel tubular swaged poles, type 410, SP-22 (8.5 meters long) with 300mm x 300 mm X 6 mm milf steel base plate contineously welded to pole, MS steel plate of 3 mm thick final taper plug bolt, nuts and screws all as specified including factory painted with two coats of black bituminous paint internally through out and externally for embedded portion and applying two coats of aluminium paint over a coat of red oxide primer on remaining exposed surfaces after eretion complete all as spedified Zebra painting with black and white paint upto 1.5 mtr height from ground level and pole marking complete all as specified and as directed.

Dismantling Air break gang operated switches including insulators and operating mechanism accessories etc.

S & F HT 11 KV out door type gang operated air break switch triple pole mechanically operated, suitable for horizontal or vertical mounted on insulators and steel frame, with drop out fuse unit having 12 insulators and operating mechanism worked from ground level for current rating 200 Amps complete all as specified and as directed.

S & F Lighting arrester expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo Amp, accessories with fixing arrangment including taking out old unserviceable one complete all as specified and as directed.

S&F 80 mm bore galvanised iron tubes light grade for cable protection laid in trenches or for fixing to pole or wall incl cutting of road complete all as specified and directed.

M&L for HT Cable end termination joint suitable for 11000 Volts grade 95 Sqmm 3 Core XLPE 11KV cable, outdoor, heat shrinkable type with all accessories complete all as specified and directed.

M&L for HT strainght through joint for 11000 volts grade 95 sqmm 3 core XLPE 11 KV cable, heat shrinkable type with all accessories complete all as specified and directed.

M &L for replacement of jump connection of two/four pole structure by using ACSR conductor weasel alkathine pipe aluminum lugs, bolts etc all directed by Engineer-in-charge Note: Rates includes Conductor, pipes Lugs Nutbolts etc.

Supply and fixing HT cable route indicator cast iron of suitable size with height of 1.5 meter along with LT cable trench including planting in ground with PCC complete all as specifed and directed by Engr-in-charge.

Supply and fixing in replacement GI stip of size 32 X 6 m buried in ground / fixed to pole, wall including fixing clamp made out of 40 X 5 mm MS FI, nut, bolt and washers complete including taking out GI strip all as specified and directed by Engr-in-charge

M&L for stay assembly complete 20 mm dia with accessories as shown in Electrical plate No.1 all as specified and as directed Note : Stay clamps, excavation and concrete shall be measured and paid under relevant items

M&L for Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white with letters fihures and convention skull and bones in single red colour and fixed with MS clamps, bolts and nuts of approved size for HT 25 X 20 cm size complete all as specified and as directed.

M & L for PCC 1:4:8, type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete, and foundation of poles etc., complete all as specified and as directed.

M & L in replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground in any type of strata (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nuts, bolt, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electric plate No 3 of SSR Part I 2020 and connection to earth test point all as specified incl testing on completion”. Note: The unit Rate includes earth strip and protection pipe up to (max 7.5 metre) from earth plate/earth point/test point.

M/S Maa Durga Constructions,Pulgaon (BID ID -3504684)

SONU ENTERPRISES (BID ID -3501400)

CHAUDHARY AND ASSOCIATES (BID ID -3506508)

Bhirud Electric Stores (BID ID -3506617)