REPAIR POLISHING CANNING PAINTING OF

Amount

Repair to Almirah large steel with shelves FD-1031 Removing unserviceable locks from Almirah large steel and supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej

Removing unserviceable handles and supply and fixing with suitable nut, new chromium plated steel handle

Fixing loose shelves of Almirah with suitable nuts and bolts

Removing unserviceable legs of Almirah and supply and fixing new legs as per drg.

Repair to Almirah med steel with shelves FD-1032 Removing unserviceable locks from Almirah medium steel , supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej

Removing unserviceable handles and supply and fixing with suitable nut, new chromium plated steel handle

Fixing loose shelves of Almirah with suitable nuts and bolts

Removing unserviceable legs of Almirah and supply and fixing new legs as per drg

Repair to Chair steel tubular with out Arms FD-75 (M) Removing of unserviceable seat and back of chair steel tubular without Arms, Supply and fixing on new seat and back with suitable screws. Seat for chair

Back for chair

Repair to Chair steel tubular with Arms FD-75 (M) Removing of unserviceable seat and back and arms of chair steel tubular with arms, supply and fixing new seats, backs and arms with suitable screws. Seat for chair

Back for chair

Arms for chair

Rubber shoes for chair with screw

Repair to Form with out back FD-77 Removing unserviceable seat planks of form with out back, Supply and fixing seat plank of Ist class sheesham wood duly seasoned with suitable nuts and bolts as per drawing duly polished. Seat plank of Ist class hardwood including polishing.

S & F of 25 mm MS Square tube not less than 1 mm thickness

Repair to Form with back FD-78 Removing unserviceable seat planks of form with back and Supply and fixing seat plank of Ist class sheesham wood duly seasoned with suitable nuts and bolts as per drawing duly polished. Seat plank of Ist class hardwood including polishing.

Back rest plank of Ist class hard wood including polishing

S & F of 25 mm MS Square tube not less than 1 mm thicness

Repair to Table Office Officer steel (FD-84 (M),FD-306 and FD 1003 Removing unserviceable parts of Table office officer steel and supply and fixing of the following parts to table all as shown on drg and as directed. Top of Table table office Officer Steel shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in repair/replacement of drawer table office officer in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement legs of table office officer,25mm mild steel square tube 1.6mm thick welded with electric welding machine to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

M&L in replacement bottom stiffener of table office officer, steel 25mm mild steel square pipe 1.6mm thick welded with electric welding to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

Removing of unserviceable locks of drawer fixing new locks with duplicate keys Make : Godraj/Harrison

Repair to Table office clerk steel FD-84 (M) Removing unserviceable parts of Table office clerk steel and supply and fixing of the following parts to table all as shown on drg and as directed. Top of Table table office Clerk Steel shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in repair/replacement of drawer table office clerk steel in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Enigneer-in-Charge.

Removing of unserviceable locks of drawer fixing new locks with duplicate keys Make : Godraj/Harrison

Repair to Table 3'x3' Steel and Wooden FD-291 Removing unserviceable parts of table 3'x3' (900x900mm) and supply and fixing the following parts of table all shown on drg and as directed by the Engineer-in-Charge. Legs

Side rails

S&F 25mm square tube thickness not less than 1mm in table 3x3 steel

Top of Table 3' x 3' shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to charpoy double bunk steel with ply top Removing of existing broken/damaged part of Charpoy double bunk steel ply top, supply & fixing new parts of bed plywood top as per drg and as directed. Plywood top 12mm 6'x3'

Repair to Locker Bed Side Steel FD-1029 Removing of old unserviceable handles from Bed side locker steel and supply and fixing new chromium plated steel handle 100mm long as specified and directed.

Removing of old unserviceable safety type hasp and staple from bed side locker steel, Supply and fixing new chromium plated hasp and staple (75x60x3mm) as specified and directed.

Fixing loose shelves of locker bed side steel

Taking out old unseviceable doors of locker bed side steel and S and F of new door size as per drawing and thickness must be 1 mm thick

Removing unserviceable legs of Locker bed side steel and supply and fixing of new legs as per drg, thickness of sheet shall be minimum 1 mm thick

Repair to Charpoy GI Pipe with Nylon Newar FD-220 Removing unserviceable long rails from charpoy GI Pipe and supply and fixing new GI long rail as per IS-1239 medium grade 32 mm bore duly threaded as shown in drg.

GI long rail obtained vide item 95 shall be converted into short rail and fixing duly threaded as shown on drawing in replace on unserviceable short rails.

GI short rails obtained vide item No 96 above shall be converted into leg and fix in place of unserviceable legs duly threaded in charpoy GI

Removing unserviceable GI elbow from charpoy GI and supply and fixing new GI elbow three way ISI mark (medium grade) 32 mm

Removing unserviceable GI check nut and supply and fixing of new GI check nut 32 mm dia (medium grade)

Repair to Charpoy GI Pipe with ply wood top FD-220 Removing unserviceable long rails from charpoy GI Pipe with ply top and supply and fixing new GI long rail as per IS-1239 med grade 32 mm bore duly threaded as shown in drg.

M&L Removing unsv ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with 13 MS bolt 6mm dia including washer and nuts as directed by Engr-in-Charge

GI long rail obtained vide Srl item 100 shall be converted into short rail and fixing duly threaded as shown on drawing in replace on unserviceable short rails.

GI short rails obtained vide Srl item No 102 above shall be converted into leg and fix in place of unserviceable legs duly threaded in charpoy GI

Removing unserviceable GI elbow from charpoy GI and supply and fixing new GI elbow three way ISI mark (medium grade) 32 mm

Removing unserviceable GI check nut, supply and fixing of new GI check nut 32 mm dia (medium grade)

Repair to Charpoy with Hard Top M&L Removing unsv ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with MS screws 6mm dia including washer and nuts as directed by Engr-in-Charge

Book Case Steel FD-1028/1026 M&L in replacement of steel handle with new handle of size 100mm long (ISI Marked) to fix in shutter of compartment, where required to match with existing all as shown in drg and as directed by Engr-in-Charge.

M&L in replacement of locking device with lock 50mm dia four lever for bookcase steel to fixed by machine screw all as shown in drg and as directed by Engr-in-Charge.

M&L in replacement of brocken glass 5.5mm thick to shutter of compartment, swhere required to match with existing all as shown in drg and as directed by Engr-in-Charge.

Removing unserviceable shutter of book case steel and fixing new shutter as per drg, thickness of sheet shall be minimum 1 mm thick

Removing unserviceable legs of book case steel and fixing new legs as per drg, thickness of sheet shall be minimum 1 mm thick

Gas / Electric seamless welding Gas / Electric seamlesse welding 6 mm thick to various steel furniture members and components where required including grinding filling the welding surface to match the existing surface complete.

Painting to steel furniture a) Painting shall be done after removing of dents of steel surface. Putty shall be applied in dental surfaces directed by Engr-in-Charge to make surface flesh with existing surface. Putty shall be of good quality as approved by the GE. b) Painting shall be done with one coat of OG/Black/white paint (spray painting) both inside and outside of all furniture articles as per the direction of Engineer-In-charge before commencement of painting work preparation of surface shall be got approved from the Engr-in-Charge then apply the coat of painting on whole surface shall be applied on dental surface and additional one coat of paint shall be provided on the same surface:- Almirah steel large with shelves

Almirah steel med with shelves

Chair tubular steel with arms

Chair tubular steel without arms

Form with back (Frame only)

Form without back (Frame only)

Table office offrs steel

Table office clk steel

Chair verandha

Locker bed side steel

Table dining OR (Frame only)

FMN set of all Charpoy GI Pipe nylon newar & Ply top/Bed hard

Table 3'x2' without drawer steel

Table 3'x2' with drawer steel

Tresstle store room steel

Riffle rack for 16/30/60 rifles

Charpoy with hard top MAP-II/I

Teapoy verandha

M/S HARJEET ENTERPRISES