Balak (Barwala) - One GYM e...

Amount

Re- TENDER Balak (Barwala) - One GYM equipment fixed and One Open GYM for Gram PanchayatBalak Use for Girls Block Barwala District Hisar (MPLADS)

Plates 250 kg (20,15,10,5,2,5) Made from high quality rubber, Tear proof, soundless and Bouncy effect

Providing, designing and fixing Leg press size 153X137X152 cm fabricated with 2`X4` rectangular hollow pipe with 3.00 mm thick and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all weldings points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made upto of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00 mm , colourful and U V resistant environmental friendly, Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment, colour on metal, seat and basecover plaste and fixing of equipment etc.

Providing, designing and fixing of air swinging pair of size 1150 x900 x1250 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintained free, duly oiled sealed and self lubricated made by reputed company to beapproved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. Allopen ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in- Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

BRIDGE LADDER- size (2 X 2 mtr/ 3 mtr) . All joint shall be lubricated made by reputed company and powder coated using akzo noble or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burssto be approved by Engineer-in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. the equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-charge regarding material, shape of equipment color on metal, seat and base cover plate and fixing of equipment etc.

ARM WHEEL:- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm

FUNCTIONAL TRAINER MECHINE :- All pipes made up size 2”x4” of hot rolled hollow rectangular MS Pipe with size 193x100x230 cm and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

MULTY GYM SIX STATION (Leg pull, Leg Curl with Leg Extension, Biceps with Triceps, Pec Dec Fly):- Consists of 4 weighted stations and 2 light stations: and it is combination of 8 type of excersice this is Made up of Mainly Olympic rectangular pipe of 4’ x2’ with 2.15mm thickness with steel twisted wire with pvc/nyloncoated cable5mm-6mm: with pvc coated weight plates for noiseless working/movements, weight plates stack moves/slides in Stainless steel pipes for smooth and noiseless movement throughout lifespan of equipments, ball bearing mouted fibre/pvcpullys, heavy cushion padding on 12mm plys with special Non Abrasive fabric nontearing fabric.Each weight stackis 75kg sheavy.

SUPERIOR OLYMPIC BENCH FLAT :- (Made up of Mainly Olympic rectangular pipe of 4’ x2’ approx. : more nearest to approx. 170 x168x137 cm with 2.15mm thickness, heavy cushion padding on 12mm plys wth special Non Abrasive fabric non tearing fabric. With two vertical pipes have clamp forresting rodonit, used for doing Flatpattern Chestpressat One Fixed level)

SUPERIOR OLYMPIC BENCH INCLINE :- (Made up of Mainly Olympic rectangular pipe of 4’ x2’ approx.: more nearest to approx. 163x165x137 cm with 2.15mm thickness, heavy cushion padding on 12mm plys with special Non Abrasive fabric non tearing fabric. With two vertical pipes have clamp forresting rodonit,used for doing Incline level pattern chest press at one fixed incline level).

SUPERIOR OLYMPIC BENCH DECLINE :- (Made up of Mainly Olympic rectangular pipe of 4’ x2’ approx.: more nearest to approx.210x166x137 cm with 2.15mm thickness, heavy cushion padding on12 mm plys wth special Non Abrasive fabric non tearing fabric. With two vertical pipes have clampfor resting rod on it, used for doing Decline level pattern chest press at one fixed Decline level with leg locking)

SPARE FLAT BENCH FOR DUMBBELL FLY EXERCISE :- (Made up of Mainly Olympic rectangular pipe of 4’ x2’ approx.: more nearest to approx121x75x46 cm with 2.15mm thickness, heavy cushion padding on12mm plys wth special Non Abrasive fabric non tearing fabric.)

HEAVY OLYMPIC WEIGHT PLATES STAND/RACK IN TREE SHAPE :- (Made up of Mainly Olympic rectangular pipe of 4’ x2’ approx.: more nearest to approx.96x63x120 cm with 2.15mm thickness, with 6 round pipes welded { 3 pipes on each side}on which weigh plates are hanged/holded)

HEAVY DUMBELLS STAND/RACKIN DOUBLE PLATFORM :- (Made up of Mainly Olympic rectangular pipe of 4’ x2’ approx.: more nearest to approx.209x81x83 cm with 2.15mm thickness, with Angleiron welded with flat patti with rubber pasted on which dumbbell srestonit,Two platform/ shelves)

SEATED CHEST PRESS :- Dimensions : 170x120x166. Frame Structures : Over-sized internal frame tubing of high tensile strength steel, gracefully curved continuous welded, factory assembled weight frame. Name Of Tube : Oval tubing. Tube Size : 122 mm x 58 mm. Tube Gauge : 4 mm. Weight Stack : 80 Kgs.

CYCLE :- • Adjustable Height and Comfortable Seat with cushions to prevent back-aches and muscle stiffness. • 8 adjustable Resistance Levels and Tension Controller Knob. • Material - Alloy Steel. 6 Months Warranty. Size - (L*B*H) - (41*24*46) inches. • Dual Action Mode - Stationary and Moving Handles Both. Full Body Workout - Arms, Calves, Chest and Back. • Belt based resistance mechanism allows better momentum-based recovery and better pedalling technique. • Suitable for high-intensity Cardio Workout, Weight Loss, Full body workout and Strength Training.

Dumble 250 kg. (20,15,10,5,2.5) Made from high quality rubber. Tear proof, soundless and Bouncy effect.

Rods 7f/3 and 3f/2 =27f

Rod Stand

Twister: Providing, designing and fixing Twister of size 1700 X1300 X 1300 mm fabricated 2’’x4’’ rectangular hollow MS pipe and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handlebars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and sel lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment tobe fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Abb Trainer/Sit Up Brench: Main Post-114mm Pipe Size- 2’’x4’’ Thickness pipe- 3mm Pipe standard: GP Paint -Powder coating only Post caps- Aluminium/LLDPE Screws other- Nylon lock bolt Material Mild Steel Each 12000.00 Holding Capacity 120 kg Age Group 13 years plus All joint shell be lubricated made by reputed company and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are well welded with joints scalloped a necessary and dressed off removing sharp edges and burresto be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineerin-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Double cross walker: Pipe- structure made of Apollo Brand B CLASS GI. Pipe OF 114 mm OD 42 mm OD And 32 mm OD Connecting Pipe –Made of Apollo Brand B CLASS GI. Pipe OF 32 OD. Handle Frame - Made of Apollo Brand B CLASS GI. Pipe OF 42 OD. Handle Grip - Made of food Graded Rubber Bearing – Ball bearing 6205zz Bearing Caps - Made up of HDPE Material 62 mm Seats- Made of HR Sheet OF 2 mm Thickness. Pole Caps – Made up of HDPE Material. Flanges – 8 mm Thick Powder Coated (Thickness 90 micron)

CYCLE: Pipe- structure made of GI. Pipe (IS1239-2004) OF 4” OD 42 OD AND 32 OD OF 3 to 4 mm thickness Arm – structure made of GI pipe 32 OD 4 mm thickness. Bearing – Ball bearing Foot Rest - structure made of M.S. SHEET OF 2 mm Thickness. Bearing Caps - Made up of HDPE Material. Seats- structure made of M.S. SHEET OF 3 TO 4 mm Thickness. Pole Caps – Made up of HDPE Material. Paint – Powder Coated (Thickness 90 micron)

PARALLEL BAR: Material GI Finish Powder Coated Product Area 1828 x 685 x 1524 mm Safe Play Area 2438 x 1220 mm Handle Frame 38 mm OD G.I. pipe Each 7000.00 • Parallel Bar made up of 2inch B class GI pipe: Prime Stand duly bend, Foundation center pipe. • All welded joint are of good quality. • High tensile steel with galvanized nut and bolts to be used. • The powder coating done with Pure polyester powder with 60 to70 micron thickness.

PUSH UP BAR: Minimum Order Quantity 1 Piece Usage/Application Only For Outdoor Use Material GI, Mild Steel Automation Grade Manual Dimension 3900 X 1450 X 2350 mm Max. User Weight 110 Kg Pipe Dimension – Main Post 140mm dia and other post 40mm dia. All joint shell be lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment tobe fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

`Pull Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. `

5. SEE Saw :- Product type Playing Material Mild steel Size 6 Feet Age group up to 12 Seating 2 seater All Joint shall be lubricated made by reputed company and powder coated using Akzo or equipment of 80-120 micron thick. All welding joints of pipe are well welded with jointed scalloped a necessary and dressed off welded with joints scalloped a necessary and dressed off removing sharp edge and burrsto be approved by Engineer in charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPWE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cove nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer in Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

8. LEG Press Centre main Pipe 114mm B class (3mm to 3.5 thickness) Sitting pipe 40mm B class (3mm to 3.5 thickness) Both side vertical structure pipe 40mm Seat metallic sheet 3mm to 3.5 mm MS Footrest MS checked plate 4mm thickness Permanent lubricated sealed bearing of reputed brand Nuts and Bolts Galvanized Nylon covers for covering the nuts and bolts.