ANNUAL COMPREHENSIVE MAINTENANCE TO OTM ACCN AT ZONE D-IV UNDER AGE B/R-I OF GE (N) MAMUN

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.50 sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening after minor repair complete all as specified and directed

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded stone aggregate) back of chowkhats and incl two coats of synthentic enamel paint over a coat of primer on exposed area complete all as specified and directed.

All as per item 5 but size 105x60 mm

All as per item 5 but size 75x50 mm

S&F Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified and directed.

S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (Stile) with 2,4 or 6 raised panel design with 5mm thick moulded prelaminated wood grain cloured PVC sheet on the front face & 5mm plain colour PVC sheet on back face complete all as specified and directed.

M&L preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Box type Steel windows or ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , incl other fittings, hinges, handles tarred hold fasts PCC blocks including two coats of synthetic enamel paint over a coat of primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F 18 to 20 mm thick one side prelaminated PVC solid board of approved make with acrylic lamination not less than 0.5mm thick (one side decorative choice laminate and other side balancing white laminate) having weight not less than 9Kg/Sqm and average density ranging from 500-700 Kg/Cum fixed as in kitchen cabinate, cupboard and pelmet box etc with screws to steel/timber/PVC frame work complete all as specified and directed.

S&F 75 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

All as per item 15 but size 100 mm

S&F aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F 100mm hasp and staples, safety type of aluminium anodised complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F in repair 300 mm MS Rat tail door spring for door closer, complete all as specified and directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.

S&F figured glass pin head type 3 mm thick ordinary quality and glazing with oil putty n.exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joingts, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work , concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on any masonary or other than fair faces of brick work surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 05 mm thick on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, finished even and fair without using extra cement including taking down existing plaster rubbish off the premises complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for Three coats of white wash on newly plastered surface of walls including preparation of surfaces complete all as specified and directed.

M&L for Two coats of white wash on newly plastered surface of ceiling including preparation of surfaces complete all as specified and directed.

M&L for Preparation of new plastered surface of external wall and chajjas, making the surface smooth with sand paper, priming surface with alkali resistance primer paint for external surface over primed surface applying two coat of cement base paint including curing complete all as specified & directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM 1:4 including dismantling of tiles with bedding layer of mortar, rubbidh of the premises complete all as specified and directed

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:4) including dismantling of tiles with bedding layer of mortarcomplete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in daddo, skirting, steps and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick plaster in CM (1:4) including dismantling of tiles with bedding layer of mortar complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for 15mm bore pipe complete all as specified and directed.

All as per item 39 but 20mm bore pipe

S&F 15mm bore steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

All as per item 39 but 20mm bore pipe

Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc complete all as specified and directed.

All as per item 43 but 20mm bore pipe

M&L for repair to built in steel locker of any size consisting of handle, lock, hinges, make it functional including necessary welding, danting and painted one coat (internal and external) spray painting with one coat of synthetic enamel paint by sprayer including preparation of old surface complete all as specified and directed

S& fixed in reapirs Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) complete all as specified and directed.

S&F in repair Bib taps cast copper alloy, chromium plated, fancy type ISI marked with crutch or butter fly handles, screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair concealed type angle valve / stop valve cast copper alloy, chromium plated, fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm including waste pipe, brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe complete all as specified and directed.

S&F in repair pillar tap 15 mm bore chromium plated, screwed down, high pressure, screwed for iron pipe complete all specified and directed

S&F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap and to flush pipe including plastic seat and cover with stainless steel or hinging device complete all as specified and directed.

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

All as per item 57 but with oval access door

All as per item 57 but 75mm dia with oval access door

S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed.

S&F Cast iron waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints fixed to walls with all fittings including taking down unservicable pipe with fitting complete all as specified and directed.

All as per item 62 but 75mm bore pipe

S&F CI branch pipece single of 100mm bore or with parallel branches complete all as specified and directed.

All as per item 64 but 75mm bore pipe

Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc, removal of rubbish complete all as specified and directed.

M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

M&L for Brick work with old servicable bricks received from dismantling straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:4 complete all as speecified and directed

Demolition of cement concrete (un-reinforced) of any descripton and in any position, removal of rubbish complete all as specified and directed.

M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and paving, 75mm thick, laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight. complete all as specified

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres two layers (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing tank of any pattern and any type complete all as specified and directed.

All as per item 71 but capacity 1000 litres

S&F in repairs vitreous china urinal, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal aginst wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP spreader, brackets, flush pipe, grating, union with discharge pipe, etc complete all as specified and directed.

M&L Marble work 12mm to 15mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair cases etc set in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra complete all as specified and directed.

S&F Bib taps cast copper alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore fixed in repairs complete all as specified and directed.

M&L 2nd class hard (wood wrought all sides) Small fittings such as brackets of any type ( wood wrought all sides) ,latch and hinge blocks, shaped door and window stops and the like incl all necessary labours articles n exc 200 Cu.cm each complete all as specified and directed.

S&F in repair towel rail CP 600 mm long complete all as specified and directed.

Cutting chases ,pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing ,steps cills, sunshades, shelves ,lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good ,cutting not exc. 10 cms girth complete in brick walls complete all as specified and directed.

S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs of Make - Jaquar , Marc and Johnson complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheet in roof covering including rubbish of the premises complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, fenials etc suitable for single curtain rod, fixed in repair, etc complete all as specified and directed.

S&F anodised aliminium frame for doors, windows, ventilators (including grills) with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S&F anodised aliminum widnow and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) hinges type B-21 100mm long (2 Nos) suitable handles (1 Nos) complete all as specified & directed.

S&F anodised aliminium doors 100mm x 40 mm x 3.15 mm side & top rail 150 mm x 40 mmx3.15 mm middle & bottom rails of side hung type without sash bars, aluminium sections including necessary joining cleats glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting such as 150mm long (1 Nos), hinges type B-21 100mm long (3 Nos), 2 Nos tower bolt 150 long, suitable aluminium handles 200 mm long (2 Nos), aluminium door stoper complete all as specified & directed.

S&F mortice lock verticle type size 100mm 4 levers complete all as specified and directed.

M&L for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and fixed complete all as specified and directed

M&L for False ceiling of not less than 6mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side, all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of GI wire not less than 0.4mm dia in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction or @ 0.200 ltr per 50 Kg of cement complete all as specified and directed.

M&L for Water proofing treatment, APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall, to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminiuminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. (Make: IWL Ltd/STP Ltd/Tiki Tar Danosa (Pvt) Ltd)

M&L PCC moulded coloured interlocking tiles of 60 mm thick 1st quality machine made in floors/pavement/parking laiddown 25mm thick(compacted) five sieved (screwed) sand complete all as specified and directed.

Demolition of cement concrete n.exc 15cm thick below or above ground level complete all as specified and directed.

Demolistion of brick work built in cement mortar complete all as specified and directed.

M&L for PCC in 1:4:8 type D2 (using 40mm graded stone aggregate) 75mm thick as sub base complete all as specified and directed.

M&L for cement concrete 100 mm thick type B-2 (1:2:4) using 40 mm graded stone aggregate complete all as specified and directed.

S&F framed work as in gates of angle or other section with gusset plate rails braces etc complete drilled for fixing of steel sheeting or other covering gates to be prepared for hanging or sliding with and including either hook or hinges and fixing complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, including removal of rubbish complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-0 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparing old/new plastered surface of wall and appying two coat of cement base paint mixed with silicon based water repellent compound over a coat of whitewash by roller/brush complete all as specified & directed.

M&L Preparation of old plastered/unplastered surfaces of wall by scraping down smoke soot, mould moss and effloroscent salts including plastering to small disturbed surfaces, cracks are filled with crack filling paste, making even and smooth, whitening complete and applying one coat of cement base paint mixed with silicon based water repellant compound on old decorated surfaces of wall complete all as specified and as directed. NOte:- Rate of crack filling paste and silicon based water repellant compound are included in the quoted rate.

M&L Preparation of old plastered/unplastered surfaces by scraping down smoke soot, mould moss and effloroscent salts including plastering to small disturbed surfaces, making even and smooth, complete and applying one coat of exterior emulsion acrylic antifungal paint on old decorated surfaces of complete all as specified and as directed.

M&L Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 40mm to 100mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary formwork / supports if required and removing correded reinforcement and binding new reinforcement required as per site condtion and rendering with 5mm thick in CM 1:3 and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed. Note for item nos 1.01 to 1.10 : The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double storey building as directed by Engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible for this.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement incl taking down existing cement plaster of any description complete all as specified and directed.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement incl taking down existing cement plater of any descriptiion complete all as specified and directed.

M&L Preparation of old plastered/unplastered surfaces by scraping down smoke soot, mould moss and effloroscent salts, tading oil & greasy spots including filling of cracks and small holes with crack filling paste, making even and smooth, whitening complete and applying one coat of white wash on old decorated surfaces of ceiling complete all as specified and as directed.

M&L Preparation of old plastered/unplastered surfaces of walls making even and smooth using plastering/wall care putty to small disturbed surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description, not exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74 cm) white including making connections to trap, and to flush pipe incl plastic seat and cover (As directed ) with stainless steel or aluminiuminised hinging device and fixed in repair complete all as specified and directed. Make : Hindware cat part No. 92082 and equivalent to Somany & Cera

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F Pre laminated wooden`flooring 8 mm thick laid over 2 mm thick thermocol over 100 micron polythene film with suitable adhesive including dismantling of existing boards of any description any pattern including fillets, frame etc complete all as specified and directed.

M&L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 33845.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.

TARA CONSTRUCTIONS

M. C. ENTERPRISES

dadwal engineers

M/S VIJ CONSTRUCTION CO

M/s GIrdhari Lal Rakesh Kumar

M/s gurdial singh and co