Loading…
Loading…
Tender Value
₹1.9 L
EMD Value
₹1,921
Closing Date
8 Sept 2026, 3:00 pm
District Panchayat Raj Engineer, Rajanna Sircilla
S31, IDOC, Rajanna Sircilla
Balance Work to Toilet Block at MPPS Laximipur (V) of Vemulawada (M) - 2.25 L
728706
15/DPRE/RS/Tenders/2026-27, Dt: 14-08-2026
OPEN
Civil Engineering Works
RAJANNA SIRICILLA
9 documents required · 9 mandatory
₹69
₹1,921
25 Aug 2026
25 Aug 2026
25 Aug 2026
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS-20 B (APSS 308) including cost and conveyance of all material and labour charges, etc., complete, for Ordinary Soil-Manual Means-Upto 3 m depth.
Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including etc., complete for finished item of work,
Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer-in- charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand [screened), water, tiles, etc. to site, such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)
Providing and fixing 30mm thick FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS: Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat molded Prelam Pac 'C'channel of size 30mm thickness, 70mm width EIL out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Paneling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/sealed to the stiles & rails with 7mm/5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 4013 20mm width is to be stuck on the interior side of the 'C' channel using Pac solvent cement adhesive etc.complete as per direction of Engineer - incharge, manufacture specification and drawing.
Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls
Supply and fixing of RCC pre-casted frames including cost and conveyance and fixing etc., complete.
ELECTRICAL ITEMS
Supply and Fixing of 25mm dia 2.2mm thick PVC pipe (ISI MARK) concealed 1 in wall with all required accessories including masonary work and labour charges etc., complete.
Wiring with 2 runs of 14/0.3mm [1.0 Sq.mm)FINOLEX brand Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A 2 switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings
Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a 3 common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) Finolex F.R P.V.C. insulated 4 flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.l pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in CC.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
Supply and transportation of 22W, 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF20.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS. minimum CRI≥80 etc., complete with 50,000 burning hours with BIS Certification with BIS Certification. LUMINAIRE MAKE: Phillips/ OSRAM/GE Venture/Wipro/ Crompton/Bajaj / Havells/Jaquar/IB LED/Panasonic, Halonix / HPL / Syska / Eveready / Surya / Keselec.LED MAKE: PHILIPS LUMILEDS/CREE/NICHIA/OSRAM/SAMSUNG/LG LEDs.
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).
WATER SUPPLY & SANITARY ARRANGEMETNS
Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1-6" x 1'-6") C.l. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges, but excluding seignorage charges and VAT complete for finished item of work.
Supply and fixing of 3" (76.2 mm) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including cost and conveyance of all materials and labour charges etc., complete for All Floors. including cost and conveyance of all materials and all incidental and operational, labour charges, lift charges, but excluding seignorage charges and VAT etc., complete for finished item of work. (A.P.S.S. No. 1325)
Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part- 4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard Cl brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock including cost of all material and labour charges but excluding VAT.
S&F of 15 mm brass body CP finish/CPVC pillar tap of not less than 300 grams weight screw type (full turn) with internal/external threaded connection conforming to IS 8931
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556- 1995 including cost and conveyance of all material and labour charges etc complete, but excluding VAT.
Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet.
Supply and Fixing of CPVC Pipes (28.60 mm OD Pipe - SDR 13.5 )and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard.
Providing & fixing UPVC SWR pipes TYPE-B (Double socket 4 Kg/sq.cm Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials,jointing with adhesives fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete (75mm dia)
Providing & fixing UPVC SWR pipes TYPE-B (Double socket 4 Kg/sq.cm Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials,jointing with adhesives fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete (110mm dia)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ- 15.xlsx
TENDER_DOCUMENT • 0.02 MB
SBD-15.doc
TENDER_DOCUMENT • 0.72 MB
Schedule-A-15.xls
TENDER_DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].