REPAIR TO CERTAIN WOODEN FURNITURE AND CANNING OF DIFFERENT KINDS OF CHAIRS UNDER GE MH AND RH KIRKEE

Amount

Taking down carefully / removing following unserviceable component / member of CHAIR DINING and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No : CHAIR DINING (FD-279, FD-228)

Rail with suitable holes for canning.

Front leg .

Rear leg

Stiffner

Back rest

PVC/hard rubber shoe

Corner of chair

Taking down carefully / removing following unserviceable component / member of CHAIR WRITING and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No. : CHAIR WRITING (FD-250,FD-280)

Rail with suitable holes for canning.

Front leg .

Rear leg

Stiffner.

Arm rest .

Back rest .

PVC/hard rubber shoe

Corner of chair .

Taking down carefully / removing following unserviceable component / member of CHAIR EASY and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No. : CHAIR EASY (FD-229)

Rail with suitable holes for canning.

Front leg

Rear leg

Arm rest

PVC/hard rubber shoe

Corner of chair

Taking down carefully / removing following unserviceable component / member of TABLE DINING 6 / 8 PERSONS and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Note : (i) Timber shall be of Ist class hard wood Teak (ii) 4 mm thick teak wood beading shall be provided all round all as shown on drg. Drg No : TABLE DINING 6 / 8 PERSONS (FD-273,30(M)/FD/MAP/-II/03)

18/19mm thick Prelaminated MDF Board two side laminated exterior grade type-II grade-I ISI marked for table top for Table dining 8 persons of size 1800 x 900.

18/19mm thick Prelaminated MDF Board two side laminated exterior grade type-II grade-I for ISI marked table top for Table dining 6 persons of size 1500 x 900.

Leg of size 75 x 40 x 742 mm

Long rail of size 25 x 100 x 1800 mm

Long rail of size 25 x 100 x 1500 mm

Short rail of size 25 x 100 x 900 mm

25 mm thick and 90 mm wide Stiffener

Corner table dining

PVC/hard rubber shoe

Taking down carefully / removing following unserviceable component / member of BED PLYTOP and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Note : Timber shall be of Ist class hard wood Teak Drg No : BED PLYTOP (FD-246)

Long rail

4mm Thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board all as per drg.

4mm Thick one side teak face ply wood ISI Marked BWR of size 780 x180 mm for foot boards on both side of foot board all as per drg.

12 mm thick Plywood BWR grade for bed top size as per drg

Bottom rail

Leg of head board

Leg of foot board

Corner made of 1st class teak wood to strengthen long rails and leg.

M & L for Replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4mm thick teak wood edging all around for TABLE OFFICE OFFICER WOODEN Drg No.: (DB-4119 /FD-1002)

M & L for Replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I. with 4mm thick teak wood edging al around for TABLE OFFICE CLERK WOODEN Drg No.: DB-4120

M & L for Replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I. with 4mm thick teak wood edging al around for TABLE WOODEN 3' x 3' Drg No : FD-291/FD-88

Taking down carefully / removing following unserviceable component / member of TABLE DRESSING LADIES and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE DRESSING LADIES (FD-251/ FD-32)

Box w/o Drawer of 18/19mm thick prelaminated particle board exterior grade with 4mm thick teak wood beading all as shown on drg.

Sliding glass shutter 5 mm thick of size 550mm x 380mm with aluminum channel of table dressing ladies complete all as specified and directed.

Mirror 366mm x 1220 x 5mm thick of table dressing ladies, complete all as specifed and directed.

Back frame made out of 6mm thick commercial ply wood and 45mm x 40mm 1st Class teak wood frame, as per existing, complete as specified and directed.

Chromium plated knob 25mm dia 24mm length of best quality as approved.

Drawer of 12mm thick prelaminated particle board exterior grade approved by GE with 4mm thick teak wood beading all as per drg.

Legs with frame complete all as specified and directed.

Taking down carefully / removing following unserviceable component / member of TABLE DRESSING GENTS and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE DRESSING GENTS :(FD-230/FD-31)

Box (size 900 x 300 x 150 mm) w/o drawer of 18/19mm thick prelaminated particle board exterior grade approved by GE, with 4mm thick teak wood beading all as per drg.

Mirror of size 380mm x 760mm x 5.0mm thick all as shown on drg, and directed by the Engineer-in-Charge.

Back frame made out of 35mm x 25mm 1st Class teak wood & 6mm thick commercial ply grade MR, type BB, all as shown on drg, and directed by the Engineer-in-Charge.

Chromium plated knob 25mm dia,

Drawer of table dressing gents as per existing/drawing complete all as specified and directed.

All as per item No 8.00 but Fixing /Fitting of loose /dismantaled / sagged table dressing gents to the wall with "L" Bracket (Pair) as per drg and all accessories such as screw,clips, plugs, clamps, etc complete all as directed by Engineer-in-Charge.

Taking down carefully / removing following unserviceable component / member of TABLE BED SIDE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE BED SIDE (FD-276)

18/19 mm Thick prelaminated Particle board exterior grade for table top of same size and shape all as per drg.

18/19 mm Thick prelaminated Particle board exterior grade for table sides of same size and shape all as per drg.

12 mm thick prelaminated Particle board exterior grade for shelf of same size and shape.

6 mm thick BWR ply wood for Back conforming to IS: 303 BWR grade all as specified and shown in drg.

Taking down carefully / removing following unserviceable component / member of PEG TABLE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : PEG TABLE (FD-277)

18/19 mm Thick prelaminated MDF board exterior grade for table top of same size and shape with 4mm thick teak wood beading all as per drg.

Long rail

Short rail

Stiffener

PVC/hard rubber shoe

Taking down carefully / removing following unserviceable component / member of SIDE BOARD and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : SIDE BOARD (FD-1112)

18/19 mm Thick prelaminated Particle board exterior grade for table top of same size and shape of Top with 4mm thick teak wood beading all as per drg.

18/19 mm Thick prelaminated Particle board exterior grade for table sides of same size and shape with 4mm thick teak wood beading all as per drg.

6 mm thick ply wood confirming to IS: 303 BWR grade for Back of size 1200mm x 600mm all as shown on drg

Powder coated MS Handle 100mm long all as specified and shown on drg.

18/19 mm thick prelaminated particle board exterior grade in Shutter of size 375 x 475 all as per drg.

18/19 mm thick prelaminated particle board exterior grade in Bottom all as shown on drg

18/19 mm thick prelaminated particle board exterior grade Shelf all as shown on drg

Bottom frame with four legs

Taking down carefully / removing following unserviceable component / member of TABLE CENTRE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE CENTRE (FD-274)

18/19 mm thick of Prelaminated MDF Board two side laminated exterior grade type-II grade-I with 4mm thick teak wood beading all as per drg.

Short rail .

Long rail .

PVC/hard rubber shoe .

Taking down carefully / removing following unserviceable component / member of TEAPOY WOODEN and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TEAPOY WOODEN (FD-278)

18/19 mm thick of Prelaminated MDF Board Two side laminated exterior grade type-II grade-I for top with 4mm thick teak wood beading all as per drg.

Short rail

Long rail

PVC/hard rubber shoe

Taking down carefully / removing following unserviceable component / member of STOOL DRESSING and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : STOOL DRESSING (FD-252,FD-282)

Short rail

Long rail

Taking down carefully / removing following unserviceable component / member of TABLE WRITING and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE WRITING (FD-33/FD-249 /FD-275)

18/19 mm thick of prelaminated MDF Board two side laminated exterior grade type-II grade-I for Table Top of size 1145 x 600 with 4mm thick teak wood beading all as per drg.

6mm plywoood including chromium plated knobs etc in bottom of drawer all as shown on drawing.

Stiffner

Drawers of size 600 x 500 made out of 18 mm prelaminated Particle board exterior grade ISI marked all as per drg complete.

Lock of drawers 6 lever 50 mm

PVC/hard rubber shoe

Long rail

Short rail

Rear side 6mm thick ply wood

Shutter made of 18/19mm prelaminated Particle board exterior grade with 4mm thick beading hung with SS piano type hinges including one knob complete as per drg.

Taking down carefully / removing following unserviceable component / member of TABLE 3' x 2' WITH OR WITHOUT DRAWER and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : TABLE 3' x 2' WITH OR WITHOUT DRAWER(FD-42/ FD-283/ FD-224/FD-284/FD-231)

Long rail of size 25 x 65 x 900 mm

Short rail of size 25 x 65 x 600 mm

Leg of size 60 x 60 x 760 mm

Stiffner side of size 25 x 40 x 600 mm

Stiffner centre of size 25 x 40 x 900 mm

Table top of size 900 x 600 made out of 18/19 mm thick prelaminated particle board one side white and other side teak wood finish lamination, for table top with 4mm thick teak wood beading all as per drg.

Drawer with knob as per existing shape & size etc complete as per drawing

Taking down carefully / removing following unserviceable component / member of Table 1200 x 900mm and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : Table 1200 x 900mm. (FD 273)

Long rail of size 25 x 65 x 1200 mm

Short rail of size 25 x 65 x 900 mm

Leg of size 60 x 60 x 760 mm

Table top of size 1200 x 900 made out of 18/19 mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4 mm thick.

Timber Bracket of size 75x75x25 mm

Taking down carefully / removing following unserviceable component / member of BIN LINEN MULTIPURPOSE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Note : 4 mm thick teak wood beading shall be provided all round all as shown on drg. Drg No : BIN LINEN MULTIPURPOSE (FD/E6/MAP/09)

18/19 mm thick prelaminated Particle board exterior grade of same size and shape as shown on drg.

Sides made of 18/19 mm thick prelaminated Particle board exterior grade of same size and shape as shown on drg.

Back 12 mm thick plywood confirming to IS: 303 BWR grade.

Chromium plated knobs

18/19 mm thick prelaminated Particle board exterior grade for shutter with teak wood beading as per drg.

18/19 mm thick prelaminated Particle board exterior grade of same size and shape

Bottom frame and legs made of 1st class hard wood teak

Taking down carefully / removing following unserviceable component / member of BOOK CASE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : BOOK CASE (FD-45)

6 mm Thick commercial ply back as per shape and size shown in drawing.

Bottom frame and legs made of 1st class teak wood

18/19 mm thick prelaminated Particle board exterior grade for door shutter

Taking down carefully / removing following unserviceable component / member of CHAIR DINING WITH CUSHION and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : CHAIR DINING WITH CUSHION: (MAP): FD/E6/ MAP/II/04

Cushion 32 density 75mm thick for seat duly covered leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge) as per existing shape and size as directed by GE.

Front leg

Rear leg

Batten

Side rail

12mm thick BWR plywood for seat.

Taking down carefully / removing following unserviceable component / member of Chair Easy with Cushion and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : Chair Easy with Cushion FD-358

Front leg

Rear leg

PVC/hard rubber shoe

Corner

Seat of Chair Easy Foam Cushion with Frame (measurement & Size & specification as per Drg) Foam with Cushioned covered with leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge). Providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work including removing old existing unserviceable cushion.

Back of Chair Easy Foam & Cushion with Frame (measurement & Size & specification as per Drg) Foam with Cushioned covered with leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge). Providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work including removing old existing unserviceable cushion.

Handle of Chair Easy Foam & Cushion (measurement & Size & specification as per Drg) Foam with Cushioned coverd with leathrite rexine (Not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge). Providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work including removing old existing unserviceable cushion.

Taking down carefully unserviceable cane form different types of chairs and other furniture articles and M&L for recanning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown & as directed by Engr-in-Charge.

M/s SK Construction

M/s Green Leaf Electricals