Provision of Electrical fittings fans wiring in the newly renovated General Administration, Section and other miscellaneous work at Sanchar Bhawan, New Delhi. Ch. to RM of EI and Fans

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 x 1.5 Sqmm + 1 x 1.5 Sqmm earth wire

2 x 4 Sqmm + 1 x 4 Sqmm earth wire

4 x 4 sqmm + 2 x 4 sqmm earth wire

Supply & drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supply & fixing of following conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20 mm Steel conduit

25 mm Steel conduit

20 mm medium class PVC conduit

25 mm medium class PVC conduit

Supply & fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. [make: Anchor-Roma/ Crabtree/ Havells/ MK/ North West/ Standard]

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 Run of cable

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

SITC of surface mounting following size LED luminaries having high brightness SMD LED light source suitable for operation on 230v 50Hz AC power supply complete with all accessories including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthling as reqd. a) 34 Watt b) System lumens efficacy : Not less than 120 lumen per watt c) Driver efficiency : Not less than 85% d) THD : Not more than 10% e) CRI : Not less than 80 f) UGR : Less than 19% g) LED Life : Not less than 50000 hours @ LM 70% h) Colour temperature : 5500 - 6500 K i) Operating voltage range : 140 Volt to 270 Volt j) Installation type : Recess Ceiling installation (Make: M/s Phillips / Havells or Wipro)

34 W 2' X 2' LED Panel

Supply and fixing of following type heavy duty exhaust/ wall/ ceiling/ pedestal fans suitable for operation on 230V, 50 Hz single phase AC Supply i/c dismantling/ refixing, minor civil works if reqd. making connection testing and commissioning etc. complete as reqd. (Make: M/S Almonard/ Crompton/ Havells/ Usha/ Orient)

400 mm sweep, 1350 rpm, Plastic body wall fan

400 mm sweep, 1350 rpm, Pedestal fan

Replacement and fixing following accessories on the existing switch box/ cover/ on wall/ False Ceiling/ Fans i/c connections, testing etc. as required.

6 module PVC Box with Sheet Cover (M/s Anchor or SS make)

1/2 module PVC Box with Sheet Cover (M/s Anchor or SS make)

Supplying and fixing of following Equipments/accessories for local area networking of computers through database servers etc. as reqd.( Make: M/s D-Link/ Legrand)

CAT 6 information outlet plate

RJ 45 connector

Dismantling the existing defective Electrical wiring / fittings / MS boxes / switch sockets / fans / LAN accessories etc. complete as required and placed the same at desired place.

Less credit of dismantled material, which shall be the property of the Contractor (-)

Note:- 1. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 2. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 3. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 4. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 5. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 6. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 7. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 8. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 9. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 10. Bidder must mandatorily mention HSN & SAC numbers.15. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder: 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company:

PAWAN ENTERPRISES

SS ASSOCIATES

M/S R K JATOLIA ENTERPRISES