NITJ/EO/Works/Elec/119/25

Amount

Networking and Electrical wiring in CVMI and D A Laboratories (SAC 401 and SAC 402)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ Raceway as required. NOTE:(Single core wire with cable tie) 3X4 Sq mm.

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including Connections but excluding modular plate etc. as required. 15/16A switch

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including Connections but excluding modular plate etc. as required. 3 pin 5/6A socket outlet

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,Inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,Inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16way, Double door

Supplying and fixing of following ways surface/recess mounting, vertical type, 415 V, having provision of MCCB as incomer distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 6 way (4+ 18), Double door

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125A, 16KA, FPMCCB

Supplying and fixing following amps rating 240/415 volts 'C' curve miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A(Double Pole)

Supplying and fixing 5A to32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing following amps rating 240/415 volts 'C' curve miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amp Four pole/TPN MCB

Supplying and fixing following amps rating 240/415 volts 'C' curve miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amp Four pole/TPN MCB

Supplying and fixing of TPN sheet steel enclosure on surface/recess for TPN MCB complete with connection, testing and commissioning etc. as required TPN 63 A(Enclosure)

Supplying and fixing following modular base &cover Plate on existing modular metal boxes etc. as Required. 8 Module

Supplying and fixing following modular base &cover Plate on existing modular metal boxes etc. as Required. 1 or 2 Module

Supplying and fixing modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required RJ45 socket Compatible with CAT 6A

Supplying & fixing DLP U - PVC trucking of following size on the surface / ceiling i/c accessories (bends, Internal Corner, External Corner, Tee, Flat Angle, Joints & End caps) and straight flexible cover and separator partition etc. complete as reqd. 100mmX50mm (NS)

Supplying & laying one number XLPE insulated PVC sheathed Aluminum Conductor armored cable of1.1 KV grade Conforming to IS 7908(Part1) 1988with up to date amendment of following size in the existing RCC/HUME/METAL pipe/HDPE pipe/Open in air etc. as required. 4x50sq.mm

Supplying & laying one number XLPE insulated PVC sheathed Aluminum Conductor armored cable of1.1 KV grade Conforming to IS 7908(Part1) 1988with up to date amendment of following size in the existing RCC/HUME/METAL pipe/HDPE pipe/Open in air etc. as required. 4X35sq.mm

Supplying & laying one number XLPE insulated PVC sheathed Aluminum Conductor armored cable of1.1 KV grade Conforming to IS 7908(Part1) 1988with up to date amendment of following size in the existing RCC/HUME/METAL pipe/HDPE pipe/Open in air etc. as required. 3x25sq.mm

Supplying & laying one number XLPE insulated PVC sheathed Aluminum Conductor armored cable of1.1 KV grade Conforming to IS 7908(Part1) 1988with up to date amendment of following size in the existing RCC/HUME/METAL pipe/HDPE pipe/Open in air etc. as required. 3.5x 240sq.mm

Supplying and laying the following size DWC HDPE pipe ISI marked along with all accessories like socket, bend couplers, etc. conforming to IS 14930, part II complete with fitting and cutting, joints etc. in the existing trench, complete as required. 160mm dia (OD-160mm& ID153mm nominal)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminuim conductor cable of 1.1 KV grade as required. 3.5x50sqmm(35 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminuim conductor cable of 1.1 KV grade as required. 4X35sqmm(32 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminuim conductor cable of 1.1 KV grade as required. mm) 3x25sqmm(25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminuim conductor cable of 1.1 KV grade as required. 3.5x240sqmm(62mm)

Supplying inserting of following size DW pipe cross the road/ pucca floor without cutting of road/floor by trenchless/manual method at a level not less than 0.75 mtr. below under the road complete as required.