WATER TANK WORKS

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil ,backfilling the same soil or disposal of surplus excavated soil as directed.Rate is inclusive of demolishing bituminous surface/ concrete/ rubble/ solingstone etc if any.complete.

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).

ML6 Contractor 230V AC (2NO+2NC) or Equilant

ML6 Contractor 230V AC (2NO+2NC) or Equilant

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge .

1:4, 12mm thk.(1cement : 4Fine sand)

Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing as per IS.456 etc.complete but all including cost of cement and cost of formwork.

Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto 5m height including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing,cost of dewatering etc.complete but all including cost of cement,cost of formwork and cost of reinforcement.

Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling ,straightening, cutting,bending, laying & tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying, laying and jointing CPVC pipes of approved quality and brand for hot water line with suitable specials, including cost and conveyance of all materials, necessary specials, other incidentals etc. complete for all levels.

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.

G.M / Brass float valve with polythenefloat. (ISI-Heavy type)

50mm dia

PVC Float v/v with polythene floats

25 mm size

Brass ball valves

25mm size

50 mm size

Supplying, threading, laying and jointing the following dia. 'B' class G.I pipes and specials such a tees, bends, elbows, checknuts etc. with clamps, plugs, screws etc. including cutting and making good the walls, RCC floors, slabs etc. trenching through all stratas to a maximum depth of 0.45m and refilling etc. complete all as directed by the Engineer-in-charge. But including one t brass valve and two elbow valve

Supplying & fixing HDPE (sintex or supreme or equivalent) water tank litres connecting using necessary fittings such as connectors, adapters, testing of pipe lines steel ladder for maintaince works etc. including cost and conveyance of all materials, labour, other incidentals etc. complete.

25000 litres

2000 litres

M/s Roy Infra and Developers