Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹6.4 L+₹1.5 L (29.7%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹7.0 L+₹2.1 L (42.2%)Rejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L3 | Rejected-Finance Being not lowest |
Tender Value
₹7.1 L
EMD Value
₹14,200
Closing Date
27 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Pranav, AGE (I)
AGE (I) Manauri Allahabad-212212
PROVISION OF ADDITIONAL GRILLS AND ALLIED WORKS AT VARIOUS LOCATIONS ON SECURITY WALLS AND PROVN OF GAS BANKS FOR SNCOS MESS, DSC MESS AND OFFRS MESS AT AF STN MANAURI
2023_MES_621158_1
9118/E8
Open Tender
Civil Works
Item Rate
182 days
Manauri
As per tender docs
7 documents required · 7 mandatory
₹500
AGE(I) AF Manauri
₹14,200
Yes
6 Dec 2023
30 Sept 2023
30 Oct 2023
30 Sept 2023
27 Oct 2023
14 Oct 2023
Amount
S&F mild steel rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.of rolled mild steel Fe 410-W (Gde-E- 250) quality-A including for cutting to dead length where required, notching, drilling, fitting,riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc complete all as specified and directed.
M&L for prepartion and applying two coats of synthetic enamal ordinary tint paint inclduing red oxide primer on new steel or iron surfaces of any description, over 10cm in width or grith not otherwise described complete all as specified and directed.
M&L for prepartion and applying two coats of synthetic enamal ordinary tint paint inclduing red oxide primer on old steel or iron surfaces of any description, over 10cm in width or grith not otherwise described complete all as specified and directed.
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. of soft/loose soil complete all as specified and directed.
Removal of surplus spoil upto a distance n. exc 50 M and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D-2(using 40 mm graded crushed stone aggregate) in foundations, filling and mass concretecomplete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified and directed.
M&L rendering 15 mm thick in cement plaster 1:4 on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L applying two coat of cement base paint over a coat of white wash on new plastered surfaces of walls including necessary preparation of surfaces complete all as specified and directed.
Cutting holes of superficial area n.exc. 100sqcm into or through reinforced cement concrete beam, slabs, chajjas, etc.reinforced or otherwise and making good dismantled portion in including cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required including for provoding, fixing & removing shoring or other temporary supports complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) for fixing hold fasts complete all as specified and directed.
S&F galvanised (zinc coating) concertina coil 1050 mm dia (in stretched position) with heavy galvanized strip of 2.6mm dia core wire, weight not less than 14.5Kg/coil, 22 mm blade length, medium blade barb, distance between barbs 35mm c/c, with hardened galvanized steel clip fixed over Barbed wire with existing angle iron complete all as specified and directed. Notes :- (a) Horizontal barbed wire and angle iron support will be measured and paid separately under relevant item. (b) Measurement will be made for stretch length.
S&F in replacement galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type if standard rail straining bolts including securing or tying at crossings with and provision of galvanised complete all as specified and directed.
S&F hard drawn steel wire fabric mess size 100mm(nominal pitch of wires) and 4mm diameter of wire complete all as specified and directed.
S&F 250mm long mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 150 mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
S&F 100mm size butt hinges, med. weight, cold rolled mild steel, and fixed complete all as specified and directed.
Cutting holes exc. half brick but not exc. One brick in brick walls built in cement mortar for inserting mild steel sections/ holdfasts and making good dismantled portion in including cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed.
M&L for providing 100 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor, finished even and smooth with using extra cement including necessary use and waste of form work complete all as specified and directed.
Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri
Bharat Trading Company
M/S R S Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .