Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹41.9 L+₹82,200 (2.00%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹42.3 L+₹1.2 L (3.02%)Rejected-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | PEREN | NAGALAND | 797112 | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹42.8 L+₹1.7 L (4.21%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹44.5 L+₹3.5 L (8.48%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF SECURITY FENCING AT NE ZONE AT RMS
2023_MES_597413_1
8529/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹80,000
Yes
17 Jun 2023
22 May 2023
12 Jun 2023
22 May 2023
10 Jun 2023
5 Jun 2023
22 May 2023 - 29 May 2023
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed in concrete brick work masonary etc. complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed natural ground etc. complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.
S & F mild steel TMT bars 10 mm dia and over cut to length, bent to shape required incl. cranking bending spirally for hooping for column hooking ends and binding with and incl. mild steel wire (annealed) not less than 0.9 mm dia etc. complete all as specified and directed.
All as per Ser item No 4 here-in-before but 8 mm dia as in stirrups
M & L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and not exc 250 Sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed etc. complete all as specified and directed.
S&F Hand rails, half round or othersteel section or core for woodenhand-rail straight portion,drilled and countersunk for balusters running bars, fordoors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 and similar work of any description all as directed.
S & F in repair galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbed at 75 mm spacing and straing and fixing to any type of standard rail strain -ing Bolt , including, securing or tying at crossing with and provision of galvanised mild steel wire , staples or steel pine etc including dismantling the old barbed wire,etc. complete all as specified and directed.
Excavation in post hole(or similar holes) each n.exc 0.50 Cum getting out returning filling in and ramming earth around in layers n.exc 25cm watering and removed surplus soil to a distance n.exc 50m and making good surface in any type of soil etc. complete all as specified and directed.
M&L for PCC Type C-2 (1:3:6) using 40mm graded stone aggregate as in foundation etc. complete all as specified and directed.
Dismantling Chain link fencing any size of type complete all as specified and directed.
Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.
Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire. Complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length bend to shape as required, including straghtening etc as required in horizontal bar for securing chain link fencing complete as specified and directed.
Supply and fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n. exc 10cm - 11 to 15mm Diameter of neck complete all as specified and and directed.
M&L for preparation of new steel surface n exe 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 CM in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc. complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding etc. complete all as specified and directed.
M&L for PCC 1:4:8 Type D-2(using 40mm graded stone aggregate) 75 mm thick as in sub base finished even and rough etc. complete all as specified and directed.
M&L for PCC 1:3:6 Type D-2(using 40mm graded stone aggregate) 75 mm thick as in sub base finished even and rough etc. complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid, jointed with grey cement and no pigment complete all as specified including preperation of formation bed over 25 mm thick sand cusion and pointed in colour cement mortar 1:3 etc. complete all as specified and directed.
M&L for chequered cement concrete tiles 200x200x25mm thick over & including 15mm thick screed bed or bedding layer of mortar for laying floor finishes in cement mortar 1:6, etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches pillars etc but excluding ashlars facings dressed stone work and precasted concrete article complete all as specified and directed.
M&L for brick work with sub class' B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. etc. complete all as specified and directed.
M & L rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete work finished even and smooth without using extra cement etc. complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer of approved shade on walls all as specified & directed by Engineer-in-Charge.
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces complete all as specified & directed.
M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed.
S&F concertina coil razor type fixed with galvanissed 'J' clips, with angle iron of the following specification :- (a) Dia of coil when unstretched 600mm (b) No of circles 50 per coil (c) Nos of razor per RM 160 (d) Weight of each coil 8 Kg (e) Coverage per coil 6 mtr (f) Centtral core wire made from high tensile spring steel core wire conforming to IS:4454 duly hot dipped galvanised (conforming to IS-2629) with diammeter 2.59 mm +0.05 mm, UTS 145-160 Kg/Sqm zinc coating 250-300 /sqm (g) strip : Electro galvanized steel strip 0.50 + 0.02 mm thick, width 19 mm (before wrapping on centtral core wire), conforming to IS - 1573, zinc coating 120 gm/sqm and bitumiinised dipped, width of barbs 11.50 mm, pitch of barbs 25.4 mm+ 0.20mm (h) Handle and spikes to be provided as required complete all as specified and directed
S & F in repairs Providing precast cement concrete louvres and jallies,type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25mm thick (mea sured solid) and setting in cement mortar 1:4,including necessary form work and mould complete all as specified and as directed.
M/S VIKASH TRADERS
M/S MUNGA LAL PRASAD
Kalim sons
MS SADHNA RAHUL
M/S Lucky Builders
Ms ARENKOKLA CONTRUCTION
Shri Atoshe Tuccu
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .