SPECIAL REPAIR TO CERTAIN CLASS ROOM OF 13 TETTRA SCHOOL AND CERTAIN SANCTIONED WORKS IN DOMESTIC AREA AT AIR FORCE STATION PATHANKOT

Amount

Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard/dense soil complete all as specified and directed by Engr-in-charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed by Engr-in-charge.

Removing excavated material n exc 50m and depositing complete all as specified and directed by Engr-in-charge.

Spreading levelling in layer not exceeding 25cm thick icluding watering and well ramming complete all as specified and directed by Engr-in-charge.

Cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in filling and mass concrete as in sub floors complete all as specified and directed by Engr-in-charge.

Brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 complete all as specified and directed by Engr-in-charge.

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed by Engr-in-charge.

Rendering 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement surface complete all as specified and directed by Engr-in-charge.

Cement concrete (1:3:6) type C-2, 75 mm thick using 40mm graded agg as in plinth protection including finishing the surfaces even and fair complete all as specified and directed by Engr-in-charge.

Cement concrete (1:4:8) type D-2, 100 mm thick using 40mm graded agg as in sub base complete all as specified and directed by Engr-in-charge.

Cement concrete (1:2:4) type B-2, 100 mm thick using 40mm graded agg as in flooring complete finished even and smooth using extra cementcomplete all as specified and directed by Engr-in-charge.

Preparation of newly plastered surfaces and applying two coats of oil bound distemper, complete all as specified and directed by Engr-in-charge.

Preparation of surfaces and applying two coats of cement based paint on wall complete all as specified and directed by Engr-in-charge.

Reinforced cement concrete (nominal mix) 1:2:4 (20 mm graded aggregate), type B-1 (using 12.50mm graded crushed stone aggregates as in Slabs, Roof beamc etcsupported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed by Engr-in-charge.

Reinforced cement concrete (nominal mix) 1:2:4 (20 mm graded aggregate), type B-1 (using 12.50mm graded crushed stone aggregates as in Plinth Beams complete all as specified and directed by Engr-in-charge.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

All as per items No 16 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-charge.

Form work to soffits of suspended slab such as roof slab, floor slabs landing and similar work; n.exc 200 mm thick complete all as specified and directed by Engr-in-charge.

Formwork to edges of concrete flats, breaks in floor, openings in concrete walls, floors and roofs n.exc 10 cm width for rough finished surfaces complete all as specified and directed by Engr-in-charge.

Pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer including taking down with existing one all as specified and directed. complete all as specified and directed by Engr-in-charge.

Supplying and fixing of 35mm thick plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treatedfactory made shutters wood is to be incorporated complete all as specified & directed by Engineer-in- charge.

Supplying and fixing of Stainless steel sliding door bolts, plate type, , with bright bolt not lesss than 10mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm long complete all as specified & directed by Engineer-in- charge.

Preparaption of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge

Excavation in post holes (or similar hole) each in hard/dense soil n.exc 0.50 cu m getting out in hard/dense soil complete all as specified & directed by Engineer-in- charge

Framed work as Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates complete all as specified & directed by Engineer-in- charge

Preparation of new or priveously untreaterd steel surfaces of any description over 10cm width or girth, not otherwise desccribed applying two coats of synthetic enamel paint over a coat of redoxide complete all as specified & directed by Engineer-in- charge

Supplying and fixing of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in- charge

Supplying and fixing of RMP sheeting 1.5 mm thick with 1.5 corrugation side lap fixed with coach screw and PVC washer in roof, wall etc complete all as specified & directed by Engineer-in- charge

Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed by Engineer-in- charge

Non - Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular ) area of each tile exceeding 0.11 sqm bu not exceeding 0.18 sqm as in wall etc set and jointed in neat cement slurry and pointed in white or coloured ceemnt to match the tiles as in skirting on 10mm thick rendering in cement mortar 1:4 incl dismantling existing wall tiles as in skirting complete all as specified & directed by Engineer-in- charge

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster complete all as specified & directed by Engineer-in- charge

Rendering 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster new surface complete all as specified & directed by Engineer-in- charge

Rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement etc complete all as specified & directed by Engineer-in- charge

Demolition of cement concrete ( re-inforced) in any description and in any position not otherwise specially provided complete all as specified and directed by Engineer-in- charge

Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper, including a coat of wall care putty 2-3 mm thick complete all as specified and directed by Engineer-in- charge

Preparation of newly plastered surfaces and applying two coats of oil bound distemper, including a coat of wall care putty 2-3 mm thick complete all as specified and directed by Engineer-in- charge

Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coat of white wash on old ceiling surfaces complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered or unplastered surfaces of ceiling including cornices, pillasters applying two coat of white wash on old ceiling surfaces complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of acrylic exterior emulsion paint min four colours as approved of any shade/colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacture instructions complete all as specified and directed by Engr-in-Charge.

Preparation of newly plaster surfaces and applying two coats of acrylic exterior emulsion paint min four colours as approved of any shade/colour in camouflage pattern over a coat of primer including preparation of surfaces as per manufacture instructions complete all as specified and directed by Engr-in-Charge.

Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engr-in-Charge.

Supplying and fixing factory made solid PVC door frame single rebated of size 60 x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws taking down with existing ones complete all as specified and directed by Engr-in-Charge.

Supplying and fixing of factory made PVC Flush door of 28 to 30mm thick(stiles) with 2, 4 or 6 raised pannel design with 2 mm thick moulded prelam PVC sheet on the front face and 2mm thick panel colour PVC sheet on back face complete all as specified and directed by Engr-in-Charge.

Pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer including taking down with existing one complete all as specified and directed by Engr-in-Charge.

Supply and fixing Factory made Steel window /ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick including cutting holes and good dismantled portion in PCC(1:2:4) type B1 four Nos for each window including following fitting welded to frame shutter :(a) Hold fast,150mm long of 12mmx3mm made to shape 04 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) Stainless steel Tower bolt 150mm long-02No per leaf .(d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, including Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint complete. NOTE:- During Fixing of Window, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Preparation of old steel surfaces of any description over 10cm width or girth, not otherwise desccribed applying two coats of synthetic complete all as specified and directed by Engr-in-Charge.

Supplying and fixing mild steel, butt hinges 100mm, cold rolled medium weight mild steel complete all as specified and directed by Engr-in-Charge.

Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement motar 1:4 and dismantling existing floor tiling complete all as specified and directed by Engr-in-Charge.

Supplying and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubin complete all as specified and directed by Engr- in – charge.

All as per Srl item No 55 above but fixing only complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and directed by Engr- in – charge.

All as per Srl item No 57 above but fixing only complete all as specified and directed by Engr- in – charge.

Cutting chases, pinning in, making good to facings where required and pointing in cm 1:3 for concealed water tubing etc and making good, cutting n. exc. 10 cm width complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' or 'S' trap complete incl making good to floor complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair vitreous china wash hand basin white flat back size 550 x 400mm including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in M S brackets complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engr- in – charge.

Supplying and fixing PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair 15mm bore, stop valve/Angle valve fancy type chromium plated cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr- in – charge.

Supplying and fixing in repair pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm diac complete all as specified and directed by Engr- in – charge.

Supplying and fixing in replacement 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engr- in – charge.

Supplying and fixing grating round 100mm size of PTMT (minium weight 25gms) complete all as specified and directed by Engr- in – charge

Supply and fixing 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed by Engr- in – charge

All as per item No 70 above but 75mm bore, complete all as specified and directed by Engr- in – charge

Supplying and fixing 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr- in – charge

Supplying and fixing 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engr- in – charge

Supply and fixing 75mm dia, cast iron branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr- in – charge

Supplying and fixing 100mm dia,cast iron branch pieces, Double (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge.

Supplying and fixing 75mm dia, cast iron branch pieces, Double (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr- in – charge

Supplying and fixing 75 mm dia , cast iron cowls, complete all as specified and directed by Engr- in – charge

Supplying and fixing 100 mm dia , cast iron cowls complete all as specified and directed by Engr- in – charge

Cleaning of dust .Removal of all loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints& cracks with Highly elastic Bituminous cold applied putty having penetration after setting upto 8mm . Leveling of Surface to give proper Slope will be done as per site requirements with Shalipatch cold applied ,Bituminous Mortar & Cold Emulsion cum Waterproofing Liquid --Shalikote -T-10. Create SSD condition on Surface with Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio of 1 : 1 and apply @ 400 grm per Sqm ( As per Surface Conditions ) • Apply first coat of Tarfelt LM having elongation 200% conforming to ASTM -C -412& having crack bridging of .8mm confirming to ASTM -C -836 with Tensile strength after 7 Days 0.50 mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consumption of 700 gram per Sqm .Lay Geotex of 45 GSM /Fibre mesh simultaneously and paste it properly with overlap of 50mm .Allow the first coat to dry for 10 to 12 Hrs . • Apply 2nd coat on cured first coat with consumption @ 700 gram per Sqm in oppsite direction of first coat by Brush or Roller Allow it to dry for 10 – 12 hr after apply 3rd coat with consumption @ 700 gram per Sqm . • Ensure final curing time of 36 hrs before allowing / carrying out any further work. Conduct Ponding test after min.7 Day Applying two coats of U.V Resistant Elastomeric Exterior Axcrylic Weather resistantwaterproof coating --Shalicryl-215---Having Elongation of 300 % after curing of 14 Days confirming to ASTM D-6083-- for U.V protection of Bituminous Elastomeric Acrylic Emulsified Liquid Membrane --Tarfelt LM to give long life & prevent its deterioration from Sunlight. Note : Application of water proofing treatment will be done by Authorised Applicator only .

Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling existing floor tiling complete all as specified and directed by Engr- in – charge

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster and applying three coat of white wash incldung preparation of wall surfaces complete all as specified and directed by Engr- in – charge

Supplying and fixing in repair Vitreous china urinal half stall type, (excluding flushing cistern, flush pipe and waste pipe) white with grating and union for discharge pipe, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash sink/wash hand basins/urinals complete all as specified and directed by Engr- in – charge

Supply and fixing in repair PVC SWR pipes single socketed, in any length with rubber ring joint lain in trenches or in floor 75 mm dia complete all as specified and directed by Engr- in – charge

Supply and fixing in repair PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 75 mm dia of outle complete all as specified and directed by Engr- in – charge

Supply and fixing in repair rotational moulded polyethiene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,brass valve 20mm high pressure with polythene float and fly nut etc complete including dismantling existing water tank complete all as specified and directed by Engr- in – charge.

Supplying and fixing for factory made solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet instead of plain colour PVC sheet reinforcement with MS square tubecomplete all as specified and directed by Engr- in – charge

Supplying and fixing stainless steel butt hinge 100 mm cold rolled medium weight mild steel complete all as specified and directed by Engr- in – charge

Supplying and fixing alluminium anodised barrel tower bolt of extruded section and fixed 150mm size complete all as specified and directed by Engr- in – charge

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator light fittings etc and removing from site and making good disturbed surfaces of walls floors etc. complete all as specified and directed by Engr-in-charge.

Point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.2mm thick, duly painted for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. (Note: Colour code shall be maintained as per IE rule) (a) One light point/ /Fan/Exhaust /bell buzzer point controlled by one, one way switch

(b) One three pin 5 Amp socket on same board with other switches.

(c) One three pin 5 Amp socket on independent board

All as per item No. 92 above here in but with 2.5 Sqmm (nominal area) wire/cable for phase & neutral for one 3 Pin 15 amp socket on independent board including one 2.5 sqmm PVC insulated unsheathed multi stranded copper conductor cable FRLS,1100 volts grade as earth continuity conductor upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of switch piano flush type single pole one way 230 Volts 5/6 Amp complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of socket outlet 3 pin, 230 Volts 5/6 Amps flush type multipurpose 5 pin complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of bell push flush type 5 Amps 230 Volts single pole complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp piano flush type ISI marked complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of Switch piano flush type single pole, one way, 230 volts 15/16 Amps ISI marked complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of Call bell ding dong type AC 230 Volts single pole complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of step type regular socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 120 watts complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of ceiling rose surface bakelite 3 terminals of size 65x25mm complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of lamp holder polycarbonate insulated body with back plate complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of Red / green colour led 2W LED lamp complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of LED Poarch light fitting 9 to 12W complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of LED box type T/L fitting pre-wired for LED tube with enegry efficient LED tube extruded aluminium heat sink & high efficiency diffuser 4 Ft version for 16/18 Watts, for Base and 16/18W LED rod including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of LED 9 W Bulk head light fitting with complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp of suitable size complete all as specified and directed by Eng.-in-charge.

Supplying and fixing of 2'x2' 36 W LED recess mounting fitting complete all as specified and directed by Eng.-in-charge.

Sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sq.mm. (nominal area)drawn in concealed conduit and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 4 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed by Eng.-in-charge. (Note: Three run 4 Sqmm cable and one run conduit shall be measured as one run.)

Sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area)drawn in concealed conduit and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 6 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed by Eng.-in-charge. (Note: Three run 4 Sqmm cable and one run conduit shall be measured as one run.)

Sub main wiring with 4 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 25 Sq.mm. (nominal area)drawn in concealed conduit and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size25 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed by Eng.-in-charge. (Note: Three run 4 Sqmm cable and one run conduit shall be measured as one run.)

M&L for Distribution board vertical type TPN 4 way (V TPN) double door, including MCCB 100 Amps MCCB, 4 pole as incoming and MCBs for outgoing factory made,, IS : 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN Channel, neutral and earting link and bus bar. DBs shall be semi glassy finished with epoxy polyester based powder paint sprayed and baked at high temperture, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete all as specified and directed by Eng.-in-charge.

Sheet metal enclosures 240 volt with suitable rated bus bar for double door 12 way IP-43DB's lk-09 suitable for one MCB SPN as incoming and 10 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge including taking out old unserviceable MCB DB and removing form site. (MCBs shall be measured and paid separately)

Sheet metal enclosures 240 volt with suitable rated bus bar for double door 8 way IP-43DB's lk-09 suitable for one MCB SPN as incoming and 6 MCB SP as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge including taking out old unserviceable MCB DB and removing form site. (MCBs shall be measured and paid separately)

Sheet metal enclosures with suitable rated bus bar for double door 4 way IP-43DB's lk-09 suitable for one MCB TPN as incoming and same is as out going, mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge including taking out old unserviceable MCB DB and removing form site. (MCBs shall be measured and paid separately)

Supplying and fixing of MCB SP 6 to 32 Amp, 240 Volts, 'B' curve having breaking capacity 10 KA, complete all as specified and directed by Engr-in-charge.

Supplying and fixing of Isolator SPN 40 Amps 'B' curve 240 Volts having braking capacity 10 KA, complete all as specified and directed by Engr-in-charge.

Supplying and fixing of MCB TPN 63 Amps 'B' curve 240 Volts having braking capacity 10 KA, complete all as specified and directed by Engr-in-charge.

Supplying and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed by Engr-in-charge.

Supplying and fixing of bus bar chambers factory febricated suitable for 3 Phase & neutral iron clad with 4 Nos 200 amp rated copper strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site complete all as specified and directed by Engr-in-charge.

Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 5 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point upto length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 metre shall be measured and paid for seperately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department .

A R ENTERPRISES

M/S SOHAL CONSTRUCTION CO

dadwal engineers

INDERJIT SINGH

Vijay Kumar Contractor and Engineers

JCC ENGINEERS PRIVATE LIMITED

M/S SATYA CONSTRUCTIONS